PDF User Manual

  1. Home
  2. Manuals
  3. mothercare hereford cot User Manual

mothercare hereford cot User Manual

Made by: mothercare
Type: User Guide
Category: Baby & Toddler Furniture
Pages: 6
Size: 0.17 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

hereford cot

user guide

important.  keep for future 

reference

cuna hereford

Guía para el usuario

importante. retenga para 

referencia futura

your childʼs safety is your responsibility

if you have a problem with this product or require replacement 

parts, please contact your nearest Mothercare store or telephone 

the  Mothercare customer care line on 08453 30 40 30
Alternatively write to:
Customer Care

Mothercare

Cherry Tree Road

Watford

Herts. WD24 6SH
www.mothercare.com

la seguridad de su niño es su responsabilidad

Si surgiera algún problema con éste producto o si piezas de 

recambio sirvase ponerse en contacto con el almacen Mothercare 

mas proximo o liamar a la linea de Atencion al Cliente de 

Mothercare numero (+44) 1923 210 210
También puede escribir a:
Customer Care

Mothercare

Cherry Tree Road

Watford

Herts. WD24 6SH

England
www.mothercare.com

 


background image

This Cot is made of solid pine and features three mattress base positions
to choose from and a dropside.

Esta cuna hecha de pino macizo le ofrece la posibilidad de elegir entre 3
posiciones a la hora de colocar el colchon.

introduction  •  introduccion

1

1

2

2

important notes  • notas importantes

1

3

parts check list  •  catalog de piezas

This cot conforms to BS EN 716: 1996 safety standards for cots.

Please take a few minutes to read this user guide

Unpack your cot carefully onto a soft level surface, such as a carpeted floor.

Familiarise yourself with the parts by comparing them with the PARTS
CHECK LIST below. Do not discard any packaging until you are sure you
have all the parts.

The recommended mattress for this cot is a Mothercare ‘COT’ mattress
(118cm x 56cm) 

Please note that timber is a natural product.  The colour will darken with
age.

Esta cuna cumple con la Norma de Seguridad BS EN 716: 1996 para
cunas.

Por favor, tomese unos minutos en leer esta guia de usuario.

Desembale cuidadosamente su cuna sobre una superficie plana y blanda,
tal como un suelo enmoquetado.

Familiaricese con las piezas, comparandolas con el CATALAGO DE
PIEAZAS que sigue.  No tire el embalaje haste que este seguro de que
tiene todas las piezas.

El colchon recomendado para este cuna es un colchon Mothercare
detamano ‘CUNA’ (118cm x 58cm)

Por favor notese que madera es un producto natural.  En breve, su color se
oscurecera. 

1 mattress base /
1 base del colchon

1 fixed side /
1 lado Fijo

1 drop side /
1 lado abatible

2 drop side rod / 
2 varilla del
lateral
deslizante

1 left hand
(L/H) drop
side catch /

1 right hand
(R/H) drop
side catch /

2 top plastic 
stop / 
2 tope de plastico
superior

2 middle plastic
stop / 
2 tope de plastico
intermedio

2 bottom pastic
top / 
2 tope de plastico
inferior

8 long bolt / 
8 tornillo
largo

6 short Bolt / 
6 tornillo corto

8 barrell Nut
8 tuerca
cilindrica

1 allen key / 
1 llave allen

2 cot end  /  2 frontal de la cuna

1 fiador del
lateral delizante
(parte izquierda)

1 fiador del
lateral
deslizante
(parte derecha)

left hand side

parte izquierda

parte derecha

right hand side

 


background image

3

4

Place one of the cot ends on its side.
Turn the mattress base on its side.
Using 2 of the long bolts, screw through the cot end and into the
mattress base , inserting one barrel nut into each pre drilled hole
of the mattress base, for the bolt to secure into.

Attach the remaining cot end to the mattress base by following
the same process.

Please Note: 
It is advised that 2 people assemble the cot, in the room intended for use
on a soft, clean floor so that there is no damage caused to the cot during
its construction.

Your cot has 3 mattress positions. Decide which mattress base position
you require now.

The lowest base position is the safest and should always be used as
soon as the baby is old enough to sit up.

Nota:
Se recomienda montar la cuna entre dos personas. Asimismo es
aconsejable que el suelo la habitacion donde se vaya a montar la cuna
no sea rugoso y este limpio para la base del colchon.

La cuna le ofrece la posibilidad de elegir entre 3 posicion a la hora de
colocar el colchon.  Elija la posicion que desee para la base del colchon.

La posicion mas baja de la base es la mas segura y debe utilizarla
siempre sesde que el nino sea bastante para sentarse

assembly •  montaje  

4

1

the mattress base                                                    la base del colchon

Coloque uno de los frontales de lado sobre el suelo.
Coloque la base del colchon tambien de lado.
Utilice 2 tornillos largos, atornillelos a traves del frontal de la cuna
y de la base del colchon, a continuacioninserte una tuerca
cilindrica en cada uno de los orificious ya perforados de la base del
colchon para asgegurar los tornillos.

Haga lo mismo para sujetar el otro frontal de la cuna a la base del
colchon.

 


background image

5

6

3

Stand the cot upright.

Fix each of the plastic stops at the bottom of
each cot end, using one of the short bolts.

Fix each of the plastic guides at the middle of
each cot end, using another short bolt.

Ponga la cuna en posicion vertical.

Fije los topes de plastico en la parte inferior
de ambos frontales con un tornillo corto.

Fije las guias de plastico en la parte central
de ambos frontales con otro tornillo corto.

Position the drop side as shown and slide each
of the drop side rods through the top edge of
the drop side, then through the plastic guide,
through the bottom edge of the drop side and
finally pushing into the plastic stop.

Posicione el lateral deslizante tal y como se
muestra, pase, las varillas del lateral desilzante
por el extremo superior de dicho lateral,
despues por la guia de plastico, y por el
extremo inferior del lateral deslizante, y
finalmente empujelas haste que se encajen en
el tope de plastico.

To finish the construction, fit the R/H drop side
catch by screwing through the cot end, with a
short bolt, securing the drop side catch
between the cot end and  the top plastic stop
which should be securely fitted to the top of
the drop rod.

Repeat for the left hand side

Para finalizar el montaje, fije el fiador del
lateral deslizante de la parte derecha
atornillandolo al frontal de la cuna con un
torillo corto, asegurando el fiador del lateral
deslizante entre el frontal y el tope de plastico
superior.  Dicho tope deberia estar
perfectamente colocado en la parte superior
de la varilla desilzante.

Repita el proceso en la parte izquierda

attaching the fixed side                                        sujecion del lateral fijo

Whilst the cot is still on its side, attach the fixed cot side by passing
the remaining long bolts through the drilled hole in the cot ends into
the fixed cot side securing by screwing into the remaining  barrel
nuts  which should be inserted into the pre drilled holes in the fixed
cot side.

Con la cuna aun tumbada, sujete el lateralfijo de la cuna pasando
por el orificio de los frontales e introduciendolos en el lateral fijo,
asegurelos atornillandolos a las tuercas cilindricas que tienen que
estar colocadas en los orificios perforados del lateral fijo de la cuna.

attaching the drop side                                  sujecion del lateral abatible 

2

3

attaching the drop side                                  sujecion del lateral abatible 

4

5

 


background image

8

7

To lower, lift the drop side from the middle,
release the two catches and lower the side.

To raise, simply lift the side until it rests on
the catches.

Para bajarlo, levante el lateral delizante por
la parte central, suelte los dos fiadores y
bajelo.

Para levantarlo, simplemente levantelo
hasta que descanse sobre los fiadores.

operating the drop side                    funcionamiento del lateral deslizante

6

safety notes

•      The lowest base position is the safest and should always be

used  as soon as your child is old enough to sit up.

•      If you leave your child unattended in the cot, always ensure that

the dropside is in the highest position.

•      Never leave anything inside the cot that could provide a foothold

or present a risk of suffocation or strangulation.

•      One end of the cot has a mark indicating the height of the

mattress.  The thickness of the mattress used with this cot must
not reduce the internal depth (from mattress surface to top of
side) to less than 500mm with the base in the lowest position, or
200mm with the base in the highest position.

•      All assembly fittings should always be tightened properly with

the correct tool.  Care should be taken that no screws are loose,
because the child could trap parts of the body or clothing which
could pose a risk of strangulation.  Failure to tighten the fittings
could cause the sides, ends or base to collaspe.  Your child may
be injured by the falling components, or become trapped
beneath them.

•      The mattress used with this cot should be no more than 40mm

shorter or narrower than the length or width of the cot.

•      Strong heat sources e.g. open, electric or gas fires may be

dangerous if used near the cot.

7

care of your product

•      Periodically check all fittings to ensure none have come loose.

Any loose fittings must be tightened using the correct tool.

•      Your cot can be cleaned by wiping with a damp cloth and drying

with a soft dry cloth.

•      Never clean with abrasive, ammonia based, bleach based or

spirit type cleaners.

•      Take care when handling or moving the cot.  Careless handling

can damage wooden furniture.

6

 


background image

medidas de seguridad

•      La posicion mas baja del somier es la mas segura y la que se

utilizar siempre cuando el bebe llegue a la edad en que puede
sentarse solo.

•      Si deja su hijo solo sin atenderle en la cuna, siempre asegurese

que el lateral abatible este en la posicion mas alta.

•      Jamas deja nada dento de la cuna (objectos, juguetes, conjines)

que podrian proporcionar apoyo al nino para elevarse o podria
introducir peligro de asfixia o estangulacion.

•      El grosor del colchon que utilice con esta cuna no debe reducir la

profundidad (desde el superficie del colchon haste la parte
superior del lateral de la cuna) mas que 500mm con el somier en
la posicion mas baja ni 200mm, con el somier en la posicion mas
alta.

•      La pata de la cuna tiene una marca (un taladro) que indica esta

altura.

•      Todas las piezas de montaje (tornillos, ect) siempre deben estar

bien apretada. Debede asegurarse que ningun tornillo este flojo,
porque el nino puede enganchar o atraparpartes de su cuerpo o
de su ropa y producir peligro de estrangulacion.

•      El colchon que utilice con esta cuna no debe ser mas de 40mm

mas corto ni mas estrecho que la longitud interna o anchura de la
cuna.

•      Fuentes de calor o calefaccion como estufas electricas o de gas

pueden ser muy peligrosas si situadas cerca a la cuna.

7

cuidado del producto

•      Inspeccione su cuna periodicamente para asegurarse que las

piezas de montaje no se hayan aflojado.

•      Su cuna se puede limpiar con un trapo humedo y luego secarla

con otro trapo seco y suave. 

•      Jamas utilice productos de limpieza abrasivos ni los que tengan

base de amoniaco, lejiao alcohol. 

•      Tenga cuidado maneje la cuna.  El manejo no cuidadoso puede

hacer danos a los muebles de madera.  

6

9