Xime PB-X800 User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

4224-0048-00 Rev.00

Others

Use

Before

Use

NOTES ON SAFETY

3~6

FEATURES

7~8

CONTROL PANEL AND ADJUSTMENTS

9~11

NAME OF PARTS

12~13

INSTALLATION

14~15

HOW TO USE

16~18

CLEANING

STORING

ITEMS TO CHECK BEFORE REQUESTING A SERVICE

SPECIFICATIONS

* The following instructions are intended to help you use this Bidet safely and correctly in order

to prevent unexpected danger or damage. So, please observe them.

* The safety-related instructions are indicated as shown below depending on the degree of

danger or damage and its urgency that may arise from inappropriate use.

This mark requests your attention to certain circumstances or operation
that may lead to a danger.
Whenever this mark appears, read carefully and follow the instructions
to prevent danger

Light injury or product damage may occur if used inappropriately.

Serious injury or death may occur if used inappropriately

Mark

Meaning

Do not use the same consent with
other electric heating appliances
exceeding the allowed voltage rating.

It may be overheated
and cause fire.

This Bidet must be grounded to prevent short circuit or electric shock.

* Non-grounding may cause breakdown or electric shock.
* The plug of this Bidet has built-in ground. Always use matching outlet.

The types of instructions that must be observed are indicated by signs as follows

Do not pull out the plug by pulling the
power cord.

It may damage cause
short circuit of electric
shock due to damage.

Do not touch the power cord with wet
hand.

It may cause electric shock.

Do not use the damaged power cord or
plug.

It may cause short circuit or electric shock.

These marks indicate actions that you must not do

These marks indicate actions that you must do

Before

Use

Before

Use

Prevent the Control Panel from contact
with water.

It may cause fire or electric shock.
If seeped into the control panel, pull out the plug
and contact the place of
purchase or the Service
Center and follow the
instruction.

Do not spray water on the product or
use in excessively damp place.

It may cause fire or electric shock.

No contact with water

Do not block the warm air outlet with
hand.

Blocking the air flow may cause fire due to
internal overheating.

Do not throw live cigarette or other
burning object in the toilet.

It may cause fire.

When the product is removed, unplug
the power first.

Otherwise, it may cause electric shock.

Always unplug the power cord first
before cleaning.

Otherwise, it may cause electric shock.

Do not step on the toilet cover or place
heavy objects on it.

The cover may break down
causing injury.

If any of the following persons uses the product, someone close by must take care by setting the temperature to

?@@@@@@??

?@g?

Low

@?he?

@@@@@?he?

, etc.

A child or a person, who is old, has delicate skin, can not adjust temperature on his/her own, is under influence of sleeping
pills or cold medicine, etc, or is heavily drunk or extremely tired.

Contact of skin with the toilet seat for a prolonged time may cause low temperature burn.
Using warm air drying on the same spot of skin for a prolonged time may cause low temperature burn.

Beware of low temperature burn from toilet seat or warm drying air

Children, old or feeble person, or heavily
drunk person must be accompanied by
an adult for use.

To avoid ‘low temperature burn’,
set the temperature to “Low”
and do not let the person
use for a prolonged
time.

Do not pull the connection pipe or water
supply hose by force.

If water is flowing into the product, it may cause

fire or electric shock.

If unusual smell comes out of the
product, unplug the power cord and
contact the place of purchase or the
Service Center.

There may be danger
of electric shock.

Do not attempt to disassemble, repair or
modify the product.

It may cause electric shock
or fire or damage the
product.
Call the Service Center
for any repair works.

If the product has not been used for a

prolonged period, operate the
cleansing or bidet process 2 to 3
times before use.

Degenerated water may cause
physical damage.
Call the Service Center if
repair work is necessary.

No disassembling

2~3 times

Use neutral cleaner for cleaning and
do not use acid or alkaline cleaner.

It may cause decolorization, discoloration or
deformation.

Always use water from water service for
installation.

Using industrial water or
waste water may cause
skin damage or diseases.

Take care of using Bidet in case of patient with disease related to
anus / female and use Bidet after consulting a doctor.

Before

Use

Do not push the buttons by force.

It may cause breakdown.

Do not use the product when it does not
function properly.

It may cause fire or electric shock.
Have it repaired and use when it

works normally.

Do not rub the control panel or seat
with dry or rough cloth.

The surface of the product may lose luster.

Use the grounded AC 230V/50Hz outlet
matching with the power plug.

Otherwise, it may cause

electric shock when
breakdown or short
circuit occurs.

If your electric outlet

does not have
grounding terminal,
consult an electric
specialist.

Do not install the product where direct
sunlight reaches.

It may cause

decolorization and
discoloration.

Do not slam down the cover to shut it.

It may cause damage.

Caution

Please do not slam down the seat or cover. It may cause breakdown.

Do not place any liquid container with its
content in it.

If liquid seeps into the
product, it may cause
electric shock.

Pull out the plug when not in use for a
prolonged period.

TWIN NOZZLES

Separate cleansing nozzle and bidet nozzle

enhances hygiene.

In addition to cleansing, bidet and drying functions, this Bidet also has the following features.

ANTI-SLAM DESIGN

The seat and the cover close softly.

ADJUSTABLE NOZZLE POSITION

You can adjust the position of the nozzle to

your choice.

NOZZLE MOVEMENT

The nozzle moves forward and backward

during cleansing or bidet operation.

HEATED SEAT

The heated seat ensures comfort even in

winter.

TEMPERATURE ADJUSTMENT

You can adjust the temperature of water and

the seat to your choice.

FRAGRANCE

Fragrance can be mounted and used to

maintain fragrant air.

(Except PB-X1000, PB-X800)

(Except PB-X800)

WATER FILTER

Water filter makes water even cleaner.

(Connect in the right direction)

Grounding

Ground

Terminal

SEAT SENSOR

During bidet operation, a sensor automatically
detects when someone sits on the seat
preventing operational error.
To stop this function,
please press the button
of “Seat Temp.” during 3
seconds.

DEODORIZATION

Semi-permanent catalysis deodorizer keeps

the air fresh.

DRYER

4 levels dry function is available after using

cleansing or bidet function.

WATER PRESSURE
ADJUSTMENT

4 levels of water pressure
are available for your
choice.

LADY WASH

This is for feminine hygiene.

POWER-SAVE

Instead of turning the power completely off, this function

maintains the water and seat temperature at 25

W26X

7<B1

@??@

3=C5e?O2@@@@?g

V40Ye@@(Me@Lg

@(Y?e3)X?f

@HfN@1?f

?J@?f?@@?f

?7@?hf

?@@?hf

?3@?hf

?N@?f?@@?f

@LfJ@5?f

@)X?e7(Y?f

@@)Ke@Hg

?I4@@@@?g

(77

?W2@6Xhg

?7<?B1?@@@@@@@@@f

?3=?C5?@@@@@@@@@f

?V4@0Y?@@?he

?@@?he

?@@@@@@@@?f

?@@?he

)

maximizing power-saving.

When anybody sit on the seat, this function automatically

stops, and returns to all functions you already set.
(Except PB-X800)

Before

Use

WASH

This is for anal cleaning.

WATER PRESSURE
buttons

Use these buttons to adjust
water pressure.

STOP button

Press this button to stop
operation.

WASH/AUTO button

Use this button to select
the nozzle for anal
cleaning.
Press this button two
times to use Auto-
cleaning.

LADY WASH button

Use this button to select
the nozzle for feminine
hygiene.

MOVE button

Use this button to move
the nozzle forward or
backward.

DRYER button

Use this button to select
one of 4 levels of drying
air temperature.
(Except PB-X1200)

SEAT TEMPERATURE
button

Use this button to select
one of 4 levels of toilet
seat temperature.
To stop seat sensor,
please press the button
of “Seat Temp.” during 3
seconds.

POWER-SAVE
button

NOZZLE POSITION
buttons

Use these buttons to move
the nozzle forward or
backward to one of 4
positions of your choice.

WARM WATER
TEMPERATURE
button

Use this button to
select one of 4 levels
of warm water
temperature.

DEODORIZATION
button

Use this button to turn
on/off the deodorization
function.

(Except PB-X800)

(Except PB-X800, PB-X1000, PB-X2000)

(Except PB-X800, PB-X1200)

PB-X2500, PB-X1500, PB-X1200

Before

Use

WATER PRESSURE
buttons

Use these buttons to adjust
water pressure.

STOP button

Press this button to stop
operation.

WASH/AUTO button

Use this button to select
the nozzle for anal
cleaning.
Press this button two
times to use Auto-
cleaning.

LADY WASH button

Use this button to select
the nozzle for feminine
hygiene.

MOVE button

Use this button to move
the nozzle forward or
backward.

DRYER button

Use this button to select
one of 4 levels of drying
air temperature.

SEAT TEMPERATURE
button

Use this button to select
one of 4 levels of toilet
seat temperature.
To stop seat sensor,
please press the button
of “Seat Temp.” during 3
seconds.

POWER-SAVE
button

NOZZLE POSITION
buttons

Use these buttons to move
the nozzle forward or
backward to one of 4
positions of your choice.

WARM WATER
TEMPERATURE
button

Use this button to
select one of 4 levels
of warm water
temperature.

PB-X2000, PB-X1000

WATER PRESSURE
buttons

Use these buttons to adjust
water pressure.

STOP button

Press this button to stop
operation.

WASH button

Use this button to select
the nozzle for anal
cleaning.

LADY WASH button

Use this button to select
the nozzle for feminine
hygiene.

MOVE button

Use this button to move
the nozzle forward or
backward.

SEAT TEMPERATURE
button

Use this button to select
one of 4 levels of toilet
seat temperature.

POWER-SAVE
button

NOZZLE POSITION
buttons

Use these buttons to move
the nozzle forward or
backward to one of 4
positions of your choice.

WARM WATER
TEMPERATURE
button

Use this button to
select one of 4 levels
of warm water
temperature.

PB-X800

Other Parts(Accessories)

FRAGRANCE CHAMBER

WATER OUTLET

If the product is not going to be used
for a prolonged period or removed
for reinstallation, pull out the power
plug and open this water outlet to
drain the water.

MOUNTING
PLATE COUPLING MOLD

After installing the Mounting Plate on the toilet, couple
it in here.

WARM AIR OUTLET

Warm air exits through this outlet during drying operation.

WATER FILTER

DETACH BUTTON

Press this button to detach
the Bidet from the toilet.

POWER CORD

Check the power supply (230V 50Hz)
before connection.

If an ungrounded consent is used,

ground it first.

HEATED SEAT

Seat is heated for comfortable use In winter

(antibiotic resin)

CONTROL PANEL

For cleansing, bidet and dry
functions and for adjustments of
temperature, water pressure and
nozzles.

BIDET NOZZLE

For feminine hygiene
(antibiotic resin)

SEAT COVER

CLEANSING NOZZLE

For anal cleaning (antibiotic resin)

Replaceable water filter is a consumable part. They are available from authorized service agents.
Replacement Interval: Approx. 6 month if general water supply is used. (It may vary depending on

the quality of water)

Before

Use

Semi-sphere Stoppers

Fastening Bolts

Fastening Nuts

Mounting Plate

(for Main Body)

Other Parts(Accessories)

1 Bidet Hose T-Valve

Water Filter

(Except PB-X800)

Use

This Bidet may lightly move because being installed in the sliding one-touch
installation method, which is not abormal.

Caution : The distance between the back side of Bidet and water tank of toilet seat shall be within 10mm.

Note

The adjustment allowance of Mounting Plate position is 140~200mm along sideways
and 40mm back and forth.

Note

3. Connection of Hoses and installation of Main Body

1. Preparation

Close the water supply valve connected to
the water tank of the product.

Remove the existing toilet seat by loosening
the bolts at the bottom.

Store the removed seat.

Place the Mounting Plate on the toilet.

Align the holes in the mounting plate with the holes
in the toilet and insert the fastening bolts with bolt
stoppers from above.

Check if the existing water valve is properly
closed and detach the water tank hose of the
toilet from the existing water tap.

Connect the T-Valve to the water tap (Insert
rubber stopper)

Connect the detached water tank hose of the
toilet to the T-Valve.

Fasten the semi-sphere Stoppers and
fastening nuts as shown in the picture.

2. Installation of the Mounting Plate

Push the main body into the mounting plate till it
clicks.

Connect Bidet hose to the main body.
(Check rubber packing)

Open the valve of water supply

Water Leakage Check

Before connecting the power, open the water valve and see carefully

if there is any leakage of water.

4. Power Connection and Water Valve Test

Before Test Operation

DEODORIZATION Check (PB-X1500, PB-X2500)

Check if air blows out from the right side back of the Main Body

CLEANING and BIDET Functions Check

Press WASH OR LADY WASH button

Check if water flows out of the nozzle after 1~2 minutes.
Check if there is any leakage of water from the Main Body.
Press the WATER PRESSURE button and check if the
strength of water spray responds.
Check if the temperature of the water from the nozzle
is appropriate. (by feeling the water with hand lightly
touching the nozzle end)
Check if operation stops by pressing the STOP button.

DRY Function Check (Except PB-X800, PB-X1200)

Check if warm air blows out from right side of the nozzle by
pressing the DRYER button.
Check if operation stops by pressing the STOP button.

5. Test Operation

As this Bidet uses a water storage tank, pressing the CLEANSING button for the first
time after the installation will cause delay of 1~2 minutes until the water fills the water
tank and flows out through the nozzle.

Use

WASH Operation (for Anal Cleaning)

1. Press WASH button while sitting on the toilet seat.

The Cleansing Lamp lights up and spray of water jet begins.
Operation lasts for 2 minutes.

Position the nozzle using the NOZZLE POSITION buttons
Adjust the water strength using the WATER PRESSURE

buttons.

Water temperature will drop from the selected temperature

after about 30 seconds and will reach ambient temperature
after about 40 seconds from operation but it is normal.

2. Press MOVE button

Cleansing continues while the nozzle moves back and forth.

The nozzle movement will last throughout the duration of

Cleansing operation.

Position the nozzle using the backward and forward

adjustment buttons.

3. Press DRY button (Except PB-x800, PB-X1200)

Drying is quicker if you wipe the wet area lightly with

toilet paper before using this function.

Operation lasts for 3 minutes.

4. Press STOP button

All functions have set duration of operation but pressing

the START button in the middle of use will stop all the
functions immediately.

Auto-Cleaning (Except PB-X800)

After sitting on the seat, press “Wash” button two times.
The Auto-cleaning lamp lights up (green) and spray water for 1 minute.
After cleaning, start dry function in the level of middle for 2 minutes.
Position the nozzle position button.
Adjust the water strenght using the Water Pressure button.
Water temperature will drop from the selected temperature after about 30~40 seconds.
You can start / stop the seat sensor function. : Press “Seat Temp” button for 3 seconds.

Wind Low Mid High Off

LADY WASH Operation (Bidet)

1. Press LADY WASH button while sitting on the toilet seat.

The Lamp lights up and spray of water jet begins.
Operation lasts for 2 minutes.

Position the nozzle using the NOZZLE POSITION buttons
Adjust the water strength using the WATER PRESSURE
buttons
Water stream is softer and sprays wider area
Water temperature will drop from the selected temperature
after about 30 seconds and will reach ambient temperature
after about 40 seconds from operation but it is normal.

(Since BIDET operation uses more water than Cleansing

operation, the duration of warm water flow may be shorter)

2. Press MOVE button

Cleaning continues while the nozzle moves back

and forth.

The nozzle movement will last throughout the duration
of Bidet operation.
Position the nozzle using the backward and forward
adjustment buttons.

3. Press DRYER button (Except PB-X800, PB-X1200)

Drying is quicker if you wipe the wet area lightly with
toilet paper before using this function

Operation lasts for 3 minutes.

4. Press STOP button

All functions have set duration of operation but
pressing the START button in the middle of use will
stop all the functions immediately.

Wind Low Mid High Off

Use

Power-Save

rm
Wa

r
T

ilet

Seat

POWER-SAVE function saves the cost of electricity by keeping the
warm water and the toilet seat at low temperature.

Adjustment

water

pressure

Deodorization

While the water is being sprayed,

Press High or Low button

Initial pressure after the installation is High
If water does not flow due to low water pressure, set to High using the

adjustment button

Press WARM WATER button

?W2@6Xh?

?7@@@1h?

?@@@@@h?

?@@@@5h?

?@@@0Yh?

Warm Water lamp lights up and heating of cleansing water

begins.

Every time the button is pressed, the position of the Warm Water

Temperature Indicator Lamp shifts.

Press SEAT TEMPERATURE button

?W2@6Xh?

?7@@@1h?

?@@@@@h?

?@@@@5h?

?@@@0Yh?

The Seat Temperature Lamp lights up and seat heating

begins.

Every time the button is pressed, the position of the Seat

Temperature Indicator Lamp shifts.

The toilet seat may occasionally wobbles slightly when someone sits on it but it is normal. It is because the
product was designed for one-touch mounting on to the toilet.
The capacity of the Warm Water Tank of the Main Body is about 1.2 liter. It will be drained after about 40
seconds of WARM WATER operation. It will heat up again after 5~7 minutes from the end of operation.

After pressing Power-Save button

?W2@6Xh?

?7@@@1h?

?@@@@@h?

?@@@@5h?

?@@@0Yh?

Seat temperature keep 77

?W2@6Xhg?

?7<?B1e@@@@@@@@@@e?

?3=?C5e@@@@@@@@@@e?

?V4@0Ye@@he?

@@he?

@@@@@@@@@?e?

@@he?

during initial 1 hour and lower 68

?W2@6Xhg?

?7<?B1e@@@@@@@@@@e?

?3=?C5e@@@@@@@@@@e?

?V4@0Ye@@he?

@@he?

@@@@@@@@@?e?

@@he?

after 1 hour.

?W2@6Xh?

?7@@@1h?

?@@@@@h?

?@@@@5h?

?@@@0Yh?

Water temperature keep 85

?W2@6Xhg?

?7<?B1e@@@@@@@@@@e?

?3=?C5e@@@@@@@@@@e?

?V4@0Ye@@he?

@@he?

@@@@@@@@@?e?

@@he?

during initial 1 hour and lower 77

?W2@6Xhg?

?7<?B1e@@@@@@@@@@e?

?3=?C5e@@@@@@@@@@e?

?V4@0Ye@@he?

@@he?

@@@@@@@@@?e?

@@he?

after 1 hour.

?W2@6Xh?

?7@@@1h?

?@@@@@h?

?@@@@5h?

?@@@0Yh?

Pressing the Power-Save button again will automatically return to the set

temperature.

When you seat during “power-Save” mode
Return to previous setting and Seat warms about 1~2 minutes and

Water warms about 3~5 minutes.

PB-X1000M model returns to the set temperature if press “power-Save”
If the power plug has been pulled out or power failure occurred,

all settings are cancelled. They should be reset.

Press DEODORIZATION button while in operation. (PB-X1500, PB-X2500)

?W2@6Xh?

?7@@@1h?

?@@@@@h?

?@@@@5h?

?@@@0Yh?

Deodorization Lamp lights up and deodorization begins.

DEODORIZATION starts immediately when the button is pressed while sitting on the seat.
Pressing the DEODORIZATION button again will stop the

DEODORIZATION after 5 minutes from the start of its operation.

If stand up without pressing “Stop” button, automatically will stop

after 2 minutes.

DEODORIZATION does not stop by pressing the STOP button.
Using the DRY function during DEODORIZATION suspends the

DEODORIZATION while DRY operation lasts.

Water Outlet and Filter

Close the water supply valve

Press the DETACH button and pull the product forward.

Detach the filter section of the water supply valve at the

back of the Bidet and clean the filter using a soft brush to
remove foreign matters. (Accumulation of foreign matters will
cause reduction of sprayed water through the nozzles.)

Exterior

Use soft sponge or cloth and neutral detergent for cleaning.
Detach the toilet seat by pulling the stub for detaching.

Nozzles

If press “forth” button of Nozzle position during 3 seconds, Nozzle will come out.
Gently pull the end of the nozzle forward.
Scrub the end gently using a soft brush.

- Be careful not to damage the holes of the nozzle.
- If press “Stop” buton after cleansing, the nozzle return to the body.
Blocking the nozzle mouth during cleaning may disturb the spray angle.

Be careful not to block or damage the nozzle.

Always unplug the power cord before cleaning.

Storing the Bidet for a prolonged period of suspended use

1. Pull out the plug from the power outlet.
2. Close the water supply valve.
3. Detach the Bidet by pressing the DETACH button on the side.
4. Open the drain cap and drain the water completely.

1. Check if the power plug is firmly in place in the power outlet.
2. Adjust the temperature using the WATER TEMP button.

- Keeping warm of the warm water thank will prevent the

water from freezing.

- If the toilet room is not heated, wrap the connecting pipes

or use another heater.

Prevention of freezing

Others

PB-X800 / PB-X1000 / PB-X1500 / PB-X2000 / PB-X2500

AC 230V 50Hz

Max. 580W

1.5m (length)

98-735kPa, 0.7~7.5kgf/

?@6Xe?

?(R1e?

J@e?

?W&@e?

O&@5e?

W2@@@6T2@@@@@He?

7<e@@@<?@e@?e?

?J5?e@@5??@e@?e?

?7H?e3@H??@e@?e?

?@fN@e?@e@?e?

?@f?@e?@e@?e?

?3L?eJ@e?@e@?e?

?V/K?O&@L?J@L?@Le?

V4@0R4@?@@@?@@e?

483(width) x 530(depth) x 137(height)

5kg

Max. 1.1min. Water Stream Angle 55°, Self-cleaning Type

Max. 1.3min. Water Stream Angle 55°, Self-cleaning Type

Move and Massage Functions, Position Adjustment

4-level adjustment each of Anal Cleaning and Bidet

(Very Weak, Weak, Medium, Strong), Mycom Control

4-level adjustment (OFF, Low:33 , Medium: 37 , High: 41 )

530W

1.2 liter

4-level adjustment (OFF, Low:34 , Medium: 38 , High: 42 )

50W

Damper (Slowdown) function

4-level adjustment (Room, Low:35 , Medium: 40 , High: 45 )

250W

Catalysis type

PRODUCT NAME

MODEL

RATING

POWER CONSUMPTION

POWER CORD

SUPPLYING WATER PRESSURE

DIMENSION (mm)

WEIGHT

ANAL CLEANING

BIDET

WATER PRESSURE

ADJUSTMENT

TEMPERATURE

ADJUSTEMENT

POWER CONSUMPTION OF

WATER HEATER

TANK CAPACITY

TEMPERATURE

ADJUSTMENT

POWER CONSUMPTION

OF HEATER

OTHERS

TEMPERATURE

ADJUSTMENT

POWER CONSUMPTION

OF HEATER

WARM
WATER
CLEANSER

TOILET
SEAT
HEATER

WARM
AIR
DRYER

DEODORIZER

Automatic Cleansing & Drying Toilet

Can not operate the Bidet at all

Is the power plug not loose?
Power failure perhaps?

No water stream

Check if the water supply valve (water tap) is open
Is the nozzle not blocked?
Check if the water filter of the water supply valve (Bidet) is not blocked.
No water supply perhaps?
If the Bidet is used for the first time after the installation, it takes 1~2

minutes until the water fills the tank before it begins to flow out.

Water stream is very weak

Check the indicator lamp to see if the water pressure setting is too low.
Open the filter cap and check the filter.
Close the other water taps to improve the water flow.

Warm water is not warm enough

Isn’t the WATER TEMPERATURE button set to “OFF”
The capacity of the warm water tank is for about 1 minute’s use after

which the water is no longer warm and it will take about 7 minutes
until the water is warmed up again to the set temperature.

Water leaks

Fasten the connection of the water supply hose again
Check all the connection parts. Especially see if any rubber stopper

is missing.

Warm air or the toilet seat is not warm enough

Isn’t the temperature adjustment button of

DRY or TOILET SEAT set to “OFF”?

Water drips while not in use

If the water in the warm water tank is heated

up, it expands and seeps through the nozzle.

Water spray activated before and after the use

is to clean the nozzle and is normal.

PDF User Manual

PB-X1000\ PB-X1200\ PB-X1500\ PB-X2000\ PB-X2500

Full Text Searchable PDF User Manual