Full Text Searchable PDF User Manual
TL-510 Optical Power Meter
User Manual
V1.0
T&L TECHNOLOGY CO., LIMITED
T&L TECHNOLOGY CO., LIMITED
2
CONTENTS
1. Model Introductions
...........................1
2. Features
..............................................1
3. Technical Specifications
....................3
4. Layout
..................................................4
5. Function Keys.......................................5
6. Operation..............................................7
6.1 Turn on/off ...................................................7
6.2 Absolute power measurement.....................7
6.3 Relative power measurement......................7
6.4 User self-calibration function .......................8
6.5 Auto off function...........................................9
6.6 Replace battery ...........................................9
7. Maintenance. ……………………………9
8. Trouble-Shootings……………………10
T&L TECHNOLOGY CO., LIMITED
1
1. Model Introductions
TL-510A:
Measurement range: -70~+10dBm
,
calibrated
wavelength
:
850nm
、
1300nm
、
1310nm
、
1490nm
、
1550nm
、
1625nm
TL-510B:
Measurement range: -50~+26dBm
,
calibrated
wavelength
:
850nm
、
1300nm
、
1310nm
、
1490nm
、
1550nm
、
1625nm
2. Features
High
measurement
accuracy and display resolution
Quick response and measurement: It can display
fast-tracking and real-time measurement of optical
power when output power changes
Wide measurement range: it can provide 80dB of
optical power measurement range
Six calibrated wavelength: 850nm
、
1300nm
、
1310nm
、
1490nm
、
1550nm and 1625nm(other
wavelength can be provided according to
customer’s request)
Provide absolute optical power measurement and
relative power measurement.
Real-time monitoring and displaying the battery
level
Warning notice is available when the battery is low
T&L TECHNOLOGY CO., LIMITED
2
Auto-off
function
Backlight LCD display
AAA batteries which is more convenient to carry
User self-calibration function
T&L TECHNOLOGY CO., LIMITED
3
3. Technical Specifications
Measurement range dBm
-70
~
+10 dBm
-50
~
+26 dBm
Wavelength range
(
nm
)
800
~
1650
Calibrated wavelength
850nm
、
1300nm
、
1310nm
、
1490nm
、
1550nm
、
1625nm
(
other wavelength
will be on request
)
Detector InGaAs
Accuracy
<±3%
(
-10dBm
、
22
℃)
Resolution
Linearity
:
0.1%
,
Non-linearity
:
0.01dBm
Working temperature
-10
℃~
+50
℃
Storage temperature
-20
℃~
+70
℃
Relative humidity
90%
(+
30
℃),
connector
Movable FC/PC SC/PC
,
( ST as
Optional)
Power supply
3pcs AAA batteries
DC power supply
Optional accessory which require
special order
Support wide range power input work
(AC 90-240)
Working hours
>120 hours
(
without backlight
)
Weight(g) 160g
Dimension(mm) 130×69×29
T&L TECHNOLOGY CO., LIMITED
4
4. Layout
1. Wavelength
:
Display the wavelength, such as
850nm
、
1300nm
、
1310nm
、
1490nm
、
1550nm and
1625nm.
2. Power value
:
Displays the current output power under
absolute
T&L TECHNOLOGY CO., LIMITED
5
test mode
Displays the difference between the current output
power and reference power under
relative test
mode
3. Unit
:
mW
、
uW
、
nW
、
dBm
、
dB.
4. Battery level : I
ndicate the current battery level.
When the icon is blank, it means the power is too low,
please change the batteries.
5.
Auto-off
:
Activate the 10-minute auto off function
6. ON/OFF
7. Wavelength select
8. REF Relative power
:
Press REF for 2 seconds to
start relative test
9. DBm/w:
Absolute power
5. Function Keys
1) ON/OFF
:
press ON/OFF to turn it on. And press it
for 3 seconds to turn it off. Under power-on mode,
press this key shortly to activate or deactivate the
10-minute auto off function. The default setting is
auto-off function ON when start the meter.
Operators can press ON/OFF shortly to close the
auto-off function.
2) dBm/W
:
press dBm/W to enter absolute
measurement mode. Press it repeatly to switch the
display power unit between W and dBm
3)
λ
:
Switch the wavelength from 6 calibrated
T&L TECHNOLOGY CO., LIMITED
6
wavelengths, the current choice of wavelength will
appears on the LCD
4)
REF
:
press REF key to enter relative
measurement mode and it has 3 working modes:
A) Directly enter the relative measurement: in
absolute measurement mode, press REF to enter
the relative measurement. Now the Ref value shows
the previous saved power values.
B) Save the reference value
:
when enter the
relative measurement mode, press REF for 2
seconds to save the current absolute power value as
REF value and show the relative power value in dB
unit
C) Enter the relative measurement mode and save
current reference value: in the absolute
measurement mode, press REF for 2 seconds to
enter the REF measurement mode and save the
current value as REF value which will appears in Ref
position. Now the value in dB unit on the LCD and
the vale means the difference value between the
measurement value and REF value, meanwhile, the
REF value will displays in the REF position.
5) Backlit is on when turning on the unit. It will turn off
one minute later. Operators can press any key to
make backlit for another one minute.
T&L TECHNOLOGY CO., LIMITED
7
6. Operation
6.1 Turn on/off
Press ON/OFF shortly to turn on the unit. Press
ON/OFF for a few seconds to turn it off and press
this key slightly to activate or deactivate the auto-off
function.
6.2 Absolute power measurement
Insert optical signal (Insert the pigtail properly), turn
on the meter
Choose the wavelength via
λ
key. If the tested
wavelength is not exactly same to the one in the
power meter, then choose a close one from the
power meter. For example, 1300nm wavelength is
near to 1310nm, we can choose 1310nm to
substitue 1300nm.
Press dBm/W to choose the display unit. The
default wavelength is 1310nm and working mode is
dBm.
After the above steps, the LCD will show the test
power value.
6.3 Relative power measurement
Set the wavelength
Press REF for 2 seconds to enter the relative
measurement mode. now LCD screen display
00.00dB
Measurement:
Insert
the pigtail need to be tested
T&L TECHNOLOGY CO., LIMITED
8
and introduce another measurement light, now the
current value shown in the LCD is the difference
value between the tested signal and reference
value.
The reference value shown in the Ref position
Press dBm/W to review the current absolute power
value. Press REF to review the current reference
value.
6.4 User self-calibration function
During the operation, when operators need to calibrate
the meter to be accordance with other meters. So our
product offers operators self-calibration function, the
following steps will tell you how to do:
Take out the batteries and pull up the switch 1 to
“ON” position.
Put the battery back to the battery compartment and
turn on the unit to choose the wavelength for
calibration.
ON
Work p osition
1 2
T&L TECHNOLOGY CO., LIMITED
9
Now connect it with a pigtail which we already know
its power and press REF or dBm/W to increase or
decrease the power value by 0.05d every time. Until
the LCD display the pigtail’s power (Or the
difference gap less than 0.3db), press ON/OFF to
save the
Repeat above operation for other wavelength
After recalibrate each wavelength, please pull down
the switch 1 (come back to the position, the
opposition of the “ON” )and turn off the meter
End the user self calibration operation
6.5 Auto off function
The auto off is on when turning on the meter. Press
ON/OFF to activate or deactivate this function.
6.6 Replace battery
If the battery level is very low, please turn off the unit
immediately and replace the batteries
Take out the batteries if not in use for a long period
of time (like one month)
NOTE:
do not charge the non-rechargeable battery,
dangerous!
7. Maintenance
1) Keep all optical connectors and surfaces free
from oil, dirt or other contamination to ensure
proper operation.
T&L TECHNOLOGY CO., LIMITED
10
2) Keep using the same type of connector
3) Please cover the dust cap when not in use to
keep the connector clean.
4) Carefully plug in or out the adapter
5) Regularly clean the connector.
6) Take out the battery when not in use for a
period of time.
8. Trouble-Shootings
Problem Reason
Solution
Faint LCD screen
Lower power
Replace battery
No backlight
Lower power
Replace battery
No display when
turning on
Lower
power/other
Turn on again or
replace battery
Fail to turn on
Lower power
Replace battery
No changing on
LCD screen
Lower power
Replace battery
In sensitive LCD
screen
Dirty or
polluted
connector
Use the correct
connector and
clean it.
Warranty Period
:
12 months from the purchasing date
Warranty clause
:
1. Under the warranty, we would repair the problems
T&L TECHNOLOGY CO., LIMITED
11
caused under the normal operation free of charge.
Note: remember to show us the warranty card when
repair
2. For the following situation, we have to charge certain
cost
:
1) Out of the warranty
;
2) Fail to provide the warranty card
3) Alter and omit the warranty card
4) Wrong operation including the problem caused
by human actors, abnormal working
environment and so on.
5) Problems or damages are not caused by the
products quality
6) Do not operate it according to this manual.
3. For the following situation, we do not repair it
1) Damaged seal label.
2)
Take apart it without permission
3) Products
from
other
manufacture
T&L TECHNOLOGY CO., LIMITED
12
Packing List
1) TL-510 Optical Power Meter…………………1pc
2) Soft
case ……………………………………1pc
3) User Manual ………………………………… 1pc
4) Battery(AAA, transportation permit) ………3pcs
5) Quality Certificate ………………………………1pc
T&L TECHNOLOGY CO., LIMITED
13
Quality Certificate
Product name
:
Optical Power Meter
Product model
:
TL-510
Serial number
:
Date of production
:
Inspection
:
Warranty Card
Date of purchase
:
Customer name
:
Customer address
:
Customer phone
:
Distributor name
:
Distributor phone
;
Posted back to
:
Fault unit return back to manufacture for repair purpose
should come with the warranty card with detailed
information.
T&L TECHNOLOGY CO., LIMITED
Email: zibotianlan@163.com
Web: www.tlet.com.cn