PDF User Manual

  1. Home
  2. Manuals
  3. Taurus RT1254 User Manual

Taurus RT1254 User Manual

Made by: Taurus
Type: User Manual
Category: Power Tool
Pages: 16
Size: 3.07 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

USER MANUAL

1200W ROUTER

MODEL NO.: RT1254

 


background image

2

WARRANTY & SERVICE 

AFTER SALES SUPPORT: TEL 1300 366 144

Model: 

RT1254

Description: 

1200W Router

Warranty Period: 

12 Month Warranty

What your 1 Year Warranty means:

Great care has gone into the manufacture of this product and it should therefore 

provide you with years of good service when used properly. In the event of 

product failure within its intended use over the course of the 

first

 1year  after the 

date of  purchase, we will remedy the problem as quickly as possible once it has 

been brought to our attention. In the unlikely event of such an occurrence, or if 

you require any information about the product please contact us via our after 

sales support services, details of which can be found in this manual and on the 

product itself.

Please 

fill

 in the Warranty 

Certificate

 provided and store in a safe place 

along with your proof of purchase. This will be required should you need to 

return the tool for service or warranty claim.

 


background image

3

CONTENTS: 

Warranty & Service 

page 2

Introduction 

page 3

Package Contents 

page 4

Specifications

 

page 4

General Safety Information 

page 5

Additional Safety Instructions 

page 6

Getting to Know Your Router 

page 8

Assembly 

page 9

Operating Instructions 

page 10

Trouble Shooting 

page 13

Maintenance 

page 13

Explanation of Symbols 

page 14

INTRODUCTION 

Congratulations on choosing to buy this TAURUS product. All products brought 

to you by TAURUS are manufactured to the highest standards of performance 

and safety, and, as part of our philosophy of customer service and satisfaction, 

are backed by our comprehensive 1 Year Warranty.
We hope you will enjoy using your purchase for many years to come.

 


background image

4

PACKAGE CONTENTS 

Router machine, 1PC
Rods, 2PCs
Collets (1X 1/4”, 1X5/16”), Total 2PCs
Pivot Rod Trammel, 1PC
15mm template follower, 1PC Spanner, 1PC
Parallel Guide Fence, 1PC
Dust Extraction Port, 1PC (already 

fixed

 on main machine) 

Instruction Manual, 1PC
Warranty Stickers, 2PCs
Warranty 

certificate,

 1PC

SPECIFICATIONS 

Rated Input:

230-240V ~ 50Hz, 1200W

Collet size:

1/4” and 5/16”

No Load Speed:

11,500~30,000rpm

Cutting Capacity:

dia. 30mm 

Plunge Stroke:

0~38mm with Dust Extraction

0~50mm without Dust Extraction 

Sound Pressure Level

86dB(A) 

Sound Pressure Level

97dB(A)

Vibration Level

3.6m/S

2

 


background image

5

GENERAL SAFETY INSTRUCTIONS 

  

  

  

  

  

When using electric tools basic safety precautions should always be followed to reduce the risk of fire, 

electric shock and personal injury. Read all these instructions before attempting to use the machine.

1. 

Consider the environment.

 

     Do not work in the rain. Do not work in damp or wet conditions. Do not use without adequate 

light. Do not use near flammable or hazardous materials.

2. 

Keep children away.

     This tool is not intended for use by young children or infirm persons without supervision. Young 

children must be supervised to ensure that they do not play with this tool. 

This router is not intended 

for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack 
of experience and knowledge, unless they have been given supervision or instruction concerning 
use of the router by a person responsible for their safety. Children must be supervised to ensure 
that they do not play with the router.

3. 

Don’t force the tool.

     Do not put undue strain or force on this equipment. Do not operate any tool for extended periods 

continuously, allow tool to cool. Operate only as intended. 

4. 

Dress properly.

     Always wear suitable clothing. Do not wear loose clothing. Wear suitable footwear and keep long 

hair away from moving parts.

5. 

Safety glasses.

     To avoid the risk of eye damage from flying material always wear suitable safety glasses.

6. 

Ear protection.

 

 

     To avoid the risk of hearing loss, always use a suitable hearing protection device, when operating 

noisy power tools or working in a noisy environment.

7. 

Lung protection.

     To avoid the risk of damaging your lungs from inhaling dust or fumes always use a suitable dust 

mask when working in a dust filled environment.

8. 

Personal injury.

 

     Keep hands and other body parts away from moving parts when operating. Keep other people 

away from the work area to avoid personal injury through flying objects.                  

9. 

Protect the cord.

     Never carry the equipment by the cord. Do not pull the cord to disconnect from the supply. Keep 

 


background image

6

cord away from any sharp objects or heat source. 

10. 

Damaged or dropped.

     Always inspect your table and supply cord before use. Do not use this equipment if it has been 

damaged, dropped, left outdoors or dropped in water. Return it to an authorized service dealer 
for examination and repair.

11. 

Store in a safe place

     Always disconnect from power supply when not in use. When not in use store your table and all 

its accessories and instruction manual in a safe and dry place.

12 Store in a safe place

     Have any power tool serviced by a qualified repair person using only identical replacement parts. 

This will ensure that the safety of the power tool is maintained.

ADDITIONAL SAFETY INSTRUCTIONS 

WARNING! 

Read all instructions Failure to follow all instructions listed below may result in 

electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed  below 

refers to your mains-operated (corded) power tool.

1) 

Work area

a) 

Keep work area clean and well lit

Cluttered and dark areas invite accidents.

b)  

Do not operate power tools in explosive atmospheres, such as in the presence of flammable 

liquids, gases or dust. 

Power tools create sparks which may ignite the dust or fumes.

c)  

Keep children and bystanders away while operating a power tool. 

Distractions can cause  you 

to lose control.

2) 

Electrical safety

a)  

Power  ool  plugs must match the outlet. Never modify the plug  in any way. Do not use any 
adapter plugs with earthed (grounded) power tools. 

Unmodified plugs and matching outlets 

will reduce risk of electric shock.

b)  

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and 
refrigerators. 

There is an increased risk of electric shock if your body is earthed or grounded.

c)  

Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase 

the risk of electric shock.

d)  

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power 
tool. Keep cord away from heat, oil, sharp edges or moving parts. 

Damaged or entangled 

cords increase the risk of electric shock.

e)  

When operating a power tool outdoors, use an extension cord suitable for outdoor use. 

Use 

of a cord suitable for outdoor use reduces the risk of electric shock.

3) 

Personal safety

a)  

Stay alert, watch what you are doing and use common sense when operating a power tool. Do 

 


background image

7

not use a power tool while  you are tired or under the influence of drugs, alcohol or  medication. 

A moment of inattention while operating power tools may result in serious personal injury.

b)  

Use safety equipment. Always wear eye protection. 

Safety equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce 
personal injuries.

c)  

Avoid accidental starting. Ensure the switch is in the off-position before plugging in.

 

Carrying power tools with your finger on the switch or plugging in power 

tools that have the 

switch on invites accidents.

d)  

Remove any adjusting key or wrench before turning the power tool on. 

A wrench or a key left 

attached to

 

a rotating part of the power tool may result in personal injury.

e)  

Do not overreach. Keep proper footing and balance at all times. 

This enables better control of 

the power tool in unexpected situations.

f)  

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves 
away from moving parts. 

Loose clothes, jewellery or long hair can be caught in moving parts.

g)  

If devices are provided for the connection of dust extraction and collection facilities, ensure 
these are connected and properly used. 

Use of these devices can reduce dust related hazards

.

4) 

Power tool use and care

a)  

Do not force the power tool. Use the correct power tool for your application. 

The correct 

power tool will do the job better and safer at the rate for which it was designed.

b)  

Do not use the power tool if the switch does not turn it on and off. 

Any power tool that 

cannot  be controlled with the switch is dangerous and must be repaired.

c)  

Disconnect the plug from the power source and/or the battery pack from the power tool 
before making

 

any adjustments, changing accessories, or storing power tools. 

Such 

preventive safety measures reduce the risk of starting the power tool accidentally.

d)  

Store idle power tools out of the reach of children and do not allow persons unfamiliar with 
the power tool or these instructions to operate the power tool. 

Power tools are dangerous in 

the hands of untrained users.

e)  

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts 
and any other condition that may affect the power tools operation. If damaged, have the 
power tool repaired before use. 

Many accidents are caused by poorly maintained power tools.

f)  

Keep cutting tools sharp and clean. 

Properly maintained cutting tools with sharp cutting edges  

are less likely to bind and are easier to control.

g)  

Use the power tool, accessories and tool bits etc. in accordance with these instructions 
and in the manner intended for the particular type of power tool, taking into account the 
working conditions and the work to be performed. 

Use of the power tool for operations 

different from those intended could result in a hazardous situation.

5) 

Service

a)  

Have your power tool serviced by a qualified repair person using only identical replacement 

parts. 

This will ensure that the safety of the power tool is maintained.

 


background image

8

GETTING TO KNOW YOUR ROUTER 

1. ON/OFF trigger switch

11. Height adjustment lock

2. Trigger safety button

12. Collet nut

3. Plunge lock level

13. Turret

4.  Additional rod locking point (used in 

conjunction with 16)

14. Rods

5. Rod locking poin 

15. Collets

6. Spindle lock button

16. Pivot rod trammel

7. Variable speed dial

17. 16-18mm template follower

8. Cable sleeve

18. Spanner

9. Fine height adjustment control

19. Parallel guide fence

10. Height adjustment scale

20. Dust extraction port (fixed on machine)

 


background image

9

ASSEMBLY 

Note:

Remove the plug from the socket before carrying out adjustment, servicing or maintenance.

PARALLEL GUIDE FENCE (Fig. 1)

Attach the two face plates (a) to the parallel guide fence (B) 
with the four  machine  screws (C) supplied. Insert  screw 

(D) through spring washer (E) and flat washer (F). Secure the 

rods onto the guide fence (B) with the screw assembly.

DUST EXTRACTION PORT (Fig. 2)

The majority of operations will require the dust extraction to 

be fitted, however some operations will be impossible with 
the port fitted. These require appropriate safety equipment 

to be worn. Fit the dust extraction port (G) into the recess. 
Pass the two machine screws (H) up through the base and 
into the nuts in the port. Secure the port without damaging 
the plastic parts by over tightening the machine screws.

NOTE: 

With the dust extraction port fitted, the plunger 

stroke is reduced to 38mm.

DUST EXTRACTION:

Inhalation of dust particles can be detrimental to health. 
The dust outlet must be connected with a dust extraction 
machine.

NOTE:

 

Due to the outlet diameter, a size adaptation may be necessary. All wood dust (including 

dust form composites like chipboards and fibre boards etc.) is hazardous to health; it can affect the 
nose, the respiratory system and the skin. For example MDF (medium density fiberboard) which 
contains formaldehyde is a known carcinogen. In addition to the above measures a  correctly fitted 

dust mask, suitable for the activity and in accordance to the relevant  standard,  must  be  worn.  

For  work  activities involving  exposure to  fine wood  dust  a  mask  should be used.

ASSEMBLY
FITTING & REPLACING ROUTER BITS (Fig. 3):

This router is designed for use with 1/4” and 5/16” shank 
router bits only.

WARNING:

 

Use  bits of  the  correct  shank diameter 

suitable  for  the  speed  of  the

 

tool. Selection of the correct 

router bit, suitable for the intended application is vital. Seek 
guidance if uncertain of selection. Press the spindle lock 
button (G) and unscrew the collet nut (H) using the spanner 
supplied.

NOTE:

 

Take care not to be lose the spring behind the 

collet. Choose from the collets provided, the appropriate size for the cutters shank 1/4” or 5/16”. If 

H

G

Fig.3

 


background image

10

the size is not known insert the bit into the collet. The collet which offer a machine fit to the shank is 

the correct one to use. Do not force the bit into a collet. Replace the spring and place the collet into 
the spindle before loosely replacing  the nut (H). Slide in the bit  allowing approx. 5-10mm overhang 

before tighten the collet nut (observe the router bit’s manufacturers instructions for more specific 

information).

NOTE:

 

Ensure at least 75% of the shank is inside the collet. Do not tighten the collet with no bit 

fitted as this will cause damage. Do not over tighten the collet nut.

WARNING:

 

Take care when handling the cutter bits as they are extremely sharp. When 

cutting is complete remove the bit before cleaning and storing it in a safe place.

OPERATING INSTRUCTIONS 

NOTE:

 

Remove the plug form the socket before carrying out adjustment, servicing or 

maintenance.

TIGGER SWITCH (FIG. 4):

The router is fitted with a safety lock off switch to prevent 

accidental starting. Press and hold lock button (K). Pull 
trigger (L) and the router will start.

VARIABLE SPEED DIAL (Fig. 5):

The variable speed dial is marked 1 to7 and the marks 
express speed from min. to max.

NOTE:

 

Cutting speed depends on material, cutter size, 

cutting depth etc. larger router bits will require a slower 
speed. For more detailed information refer to a routing/
woodworking book.

 


background image

11

SETTING THE CUTTING DEPTH (Figs. 6-8)

With a suitable router bit fitted place the router on to the work 

piece. Rotate the turret (M) to the lowest position. Slowly 
plunge the router until the bit just touched the work piece. 
Lock the router in this position with the plunge lock level.

Ensure the height adjustment lock (N) is not tight and lower 
the rod (O) until it touches the turret.

If necessary turn the fine height adjustment control (P) to 

align the nearest digit on the scale against the pointer (Q).

Take note of the setting before raising the rod upward 
to set the plunge depth (the difference between the two 
measurements) and securely tighten the height adjustment 
lock (N). E.G. scale reads 23. After adjustment reads 33, the 
plunge depth will be 10mm. Release  the plunge lock level 
and raise the router back to full height. Rotate the turret 
round several positions and the router is set up ready to 
begin work.

When beginning to cut, plunge the cutter slowly to the first 

depth and proceed with the cut. Take a second pass at 
the next step down on the turret and continue until the full 
depth is achieved.

Regulate the depth of the cut and speed of feed to ensure no 
strain is put on to the cutter or motor, however if the speed is 
too slow burn marks may appear on the work piece.

NOTE:

 

The direction of rotation is marked on the metal 

casting above the spindle stop mechanism. Traveling along 
a work piece in the wrong direction will cause the bit to pull 

and bounce, leading to a poor finish and possible damage.

If, after the full depth has been routed, further material 
removal is necessary lock the router in the plunge position. 

Rotate the fine height adjustment control (P). Turning the 
fine adjustment (P) anti-clockwise will increase the plunge 

depth. One complete turn is equivalent to 1mm plunge 
depth. When set take another pass along the cut.

NOTE:

 

Remove the plug from the socket before carrying 

out adjustment, servicing or maintenance.

 


background image

12

PARALLEL GUIDE ROUTING (Fig.9)

Ensure the edge along which the guide is going to travel is 
smooth and true as any inconsistencies will translate into 
the cut.

Pass the parallel guide rods through the four pointes in the 
router’s base and secure in place with lock knobs ®. When 
using the parallel guide an even pressure should be applied 
to each face except on a leading/trailing edge of a work 
piece. When leading on to a work piece apply the pressure 
to the forward face until both faces are on. When trailing off 
a work piece apply the pressure to the rear face until the cut 
is complete.

16mm INNER-18mm OUTER DIAMETER 

TEMPLATE FOLLOWER (Fig. 10)

For detailed information on templates refer to a routing/
woodworking book.

Lay the template follower (S) into the recess. Ensure the 
template follower faces downward and secure with the two 
countersunk screws (T)

NOTE:

 

For operations using the template follower without 

the dust extraction port fitted use the two 8mm nuts (U).

PIVOT ROD TRAMMEL (Fig.11)

Secure one of the parallel guide rods into the rear channel. 
Remove the rod locking knob from the front channel and 
secure it into the additional rod locking point. Loosen the 
wing nut and slide the trammel (W) on to the rod end. Adjust 
the point height to suit before locking the wing nut. Adjust 
the distance between the router bit and pivot point.

 


background image

13

TROUBLE SHOOTING 

NOTE: Remove the plug from the socket before carrying out adjustment, servicing or 
maintenance.

PROBLEM

POSSIBLE CAUSE

REMEDY

Motor does not start

1. Fuse

1.  Replace/reset time delay 

fuse or circuit breaker

2. Brushes worn

2.  Have brushes replaced by 

authorized service agent

3. Other

3.  Return to authorized service 

agent 

Machine vibrates

1.  Router bit not suitable for 

application

1.  Seek guidance on bit 

selection

2.  Router bit blunt

2.  Stop machine, when 

stopped, replace with a 
sharp bit

3. Incorrect direction of travel

3. Change direction of travel

Bit will not cut

1.  Attempting to remove 

excess material

1. Reduce plunge depth

2. Router bit blunt

2.   Stop  machine, when 

stopped, replace with a 
sharp bit

3. Incorrect direction of travel

3. Change direction of travel

MAINTENANCE 

This tool requires no special maintenance.

1

. Before cleaning.

    When not in use or before cleaning, always disconnect the tool from the mains supply.

2. 

Cleaning guide.

     Regularly clean the outside of the tool with a soft damp cloth and dry it with a dry towel. Do 

not immerse adaptor or tool in water. Do not use harsh solvents to clean the plastic.

3. 

Damage check.

     Always inspect your tool, adaptor and cord before use. Do not use this tool if it has been 

damaged, dropped, left outdoors or dropped in water. Return it to an authorised service dealer for 
examination and repair.

4. 

Lubrication

.

     This tool requires no additional lubrication.

 


background image

14

EXPLANATION OF SYMBOLS 

Explanation

Symbols

Read operator’s manual

Do not operate unit in rain

Wear eye and ear protection

Keep bystanders at least 5m away from unit during operation.

Explanation of the safety signal words used in this manual: 

“Warning” signals a hazard that may cause serious injury or death if the 

recommended precautions are not followed. 

“Caution” signals a hazard that may cause minor or moderate injury if the 

recommended precautions are not followed.

Double insulated 

 


background image

 


background image

16