PDF User Manual

  1. Home
  2. Manuals
  3. Summer 02641 General Usage Manuallines

Summer 02641 General Usage Manuallines

Made by: Summer
Type: General Usage Guidelines
Category: Baby Monitor
Pages: 10
Size: 1.86 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

Baby Zoom / Best View General usage and Pairing guide

(02641)

Further Contact :  Tel : 020 8420 5915    

Web : www.summerinfant.co.uk           e-mail : Jseal@summerinfant.com

 


background image

Contents

Page 

  Content 

        Step

 

 

Monitor Button functions 

 

 

 

 

-

 

 

Using the Toggle Switch   

 

 

 

 

-

 

 

Camera Button Functions 

 

 

 

 

-

 

 

Adding and Pairing an additional camera 

 

1

 

 

Adding and Pairing an additional camera 

 

2

 

 

Adding and Pairing an additional camera 

 

 

 

Adding and Pairing an additional camera 

 

4 + 5

 

 

Adding and Pairing an additional camera 

 

6

 

 

Using multiple cameras   

 

 

 

 

       

 


background image

  Power On / Off               Pan / Zoom                     Menu

Video On / Off

    Button function Guide

 

Please familiarise yourself with the buttons on your monitor before 

 

attempting to change any settings.

(Close up image)

1

 


background image

Using the toggle Switch

To use the toggle switch to pan the camera or whilst navigating the monitors menu, you need
to pull the toggle switch in the direction you require.

Picture ‘A’ shows pulling the toggle switch
to the down position using your thumb.

Picture ‘B’ shows pulling the toggle switch
to the down position using your index 
finger.

Please note that you are not required to push in the toggle switch during panning in any 
direction.

2

To zoom in press in the Pan / Zoom toggle button once. To zoom out, 
press it once again :

A

B

 


background image

Camera On / Off

Camera Pairing Button

(Close up image)

 


background image

Adding and Pairing an additional Camera

Press the Menu Button on the Monitor once :

Whatever is highlighted in red can be changed. 
Note the volume 

‘VOL’ 

is highlighted in red showing that the volume can be adjusted.

        4

Step 1

You will then see the screen below :

Turn on the monitor by holding down the (Power On / Off) button for 
2 seconds :

 


background image

Scroll down using the Pan / Zoom toggle switch :

You will need to pull the toggle switch down three times until the

‘ADD / DEL CAM’ 

is highlighted in red. 

(Do not push in the central button)

You will then see the screen below :

        

 5

Step 2

 


background image

Press in the Pan / Zoom button once :

You will then see the screen below :

6

Step 3

 


background image

Press the pairing button on the rear of the camera :

(The button is located at the rear of the camera base next of the ariel)

Ensure the camera you are going to pair is switched on :

Step 4

7

You will need to action ‘step 5’ within 5 seconds of pressing the camera 
button in ‘step 4’ so please read ahead.

Please ensure that the camera and monitor are next to eachother
and no further apart that 1 meter.

Press in the Pan / Zoom Button on the monitor within 5 seconds 
of pressing the camera button:

If you attempt to action this step before pressing the camera 
pairing button, the screen may freeze. If this happens wait ten seconds 
and start again from step 4.

After a few seconds your second camera will be paired and you will
see a screen like this :

Step 5

(Each time a camera is successfully paired it will show in blue on the screen above. The screen 
above shows that two cameras are paired because 

DEL CAM#1

 and 

DEL CAM#2 

are highlighted

in blue).

 


background image

Press the menu button twice to exit the main menu :

8

Step 6

You can now enjoy panning and zooming on both cameras

If more that one camera is used you need to manually switch between cameras.
You can change which camera you want to view by pressing ‘

MENU’ 

and using the toggle 

switch to scroll down to 

‘Cam Display’

. You will automatically be on camea 

#1 

as shown in 

picture A. To view camera 

#2

, use the toggle switch to move to the right as shown in 

picture B.

Step 7

A

B

Press the 

 ‘MENU’  

button again to exit the menu and start viewing your selected camera.