Full Text Searchable PDF User Manual
SimPal-W230
WiFi Temperature Plug
User Manual
Manual version 1.2
SimPal-W230 WiFi Temperature Plug
1
1.1
Package contents
.......................................................................................................... 2
1.2
Sockets instructions
....................................................................................................... 3
1.3
Light indicator
................................................................................................................. 4
1.4
Beeper
............................................................................................................................. 5
2.1
Install APP
....................................................................................................................... 5
2.2
Set WiFi and register device
......................................................................................... 6
2.3
Manual add device
......................................................................................................... 8
2.4
Device list
........................................................................................................................ 8
2.5
Power control
.................................................................................................................. 9
2.6
Temperature settings
................................................................................................... 11
2.7
Schedule settings
......................................................................................................... 12
2.8
Alarm settings
............................................................................................................... 13
2.9
Reset factory settings
.................................................................................................. 14
1.0
Technical Specification
................................................................................................ 14
SimPal-W230 WiFi Temperature Plug
2
1.1 Package contents
SimPal-W230 WiFi Temperature Plug
3
1.2 Sockets instructions
SimPal-W230 WiFi Temperature Plug
4
Figure 2: Temperature sensor Instruction
1.3 Light indicator
Model
Indicator
Action
Status
SimPal-W230
Power
indicator
Turning off
Socket poweroutput OFF
Constant light
Socket poweroutput ON
Wireless
indicator
Flash slowly
Connecting WiFi or register on server.
Slowly breath
Working in standby mode.
Constant light
in 3 seconds
Rest to factory setting
Flash fast
Process data
SimPal-W230 WiFi Temperature Plug
5
1.4 Beeper
One short beep
Press M button on/off
One long beep
Success to register the device on APP.
Success to set-up WiFi.
Two short beep
Request to register the device
Success register on server.
Three short beep
Failed to register on server.
Five short beep
Failed to connect WiFi
2.1 Install APP
Download
“W230 WiFi Plug” APP and install on your Android or IOS smart phone. All operation
and settings will be done on APP.
SimPal-W230 WiFi Temperature Plug
6
2.2 Set WiFi and register device
Set WiFi in smart-link mode
Set WiFi account into W230 to make it connecting with
network. Make your smart phone connected with your own
WiFi network, W230 will register same WiFi network which
smart phone already connected.
1. Power on W230 device, it will beep five times and beep
every 5 seconds, means failed to connect WiFi.
2. Open APP, click
“+” icon at the right top place, and select
“
Set WiFi and register Device
”. it will auto display the
WiFi SSID, only need to input password, and click
“CONNECT”, it will auto set the WiFi SSID and password
onto W230 device.
3. After it set success, W230 will long beep, means WiFi
connected success. It will display device Mac, input the
name, and tap
“Add”, then it can register device success.
Device will online after 1 minutes.
SimPal-W230 WiFi Temperature Plug
7
Set WiFi in AP mode
If your router work in dual 2.4G & 5G mode, then it needs to
setup W230 WiFi in AP mode. The method as following:
1.
Power on W230, after hear 5 beeps means WiFi
disconnect, press W230 M button for one second to
switch socket power status, it will go to AP mode.
2.
W230 will beep twice every 5 seconds, means
working in AP mode, it will generate “WiFi_Socket”
WiFi, make mobile phone connect
“WiFi_Socket”. (No
need password to connect “WiFi_Socket”, it may need
to set allow send data even this WiFi can not connect
Internet).
3.
Open APP, click + to add new device,
APP “Set WiFi
on AP mode” option will auto turn on, select your own
WiFi and input password, Tap “Connect”, W230 will
long beep and display device MAC, input device name
to finish register device. (If input wrong WiFi
password, W230 will failed connect WiFi and five
beeps, need to set WiFi again.)
SimPal-W230 WiFi Temperature Plug
8
2.3 Manual add device
1. When device already set WiFi, Click
“+”, and select
“
Add
device
”, input the “Device name” and device Mac, click
“Connect”, it will send register request to device. (Mac
number can be read from device label and packing box)
2. Device will beep twice once received register request. Press
W230 device M button for 1 seconds, device will long beep,
it means accept register. APP will show register device.
2.4 Device list
When open APP, it will auto display registered device, and update device status automatically.
The format of device as following:
“Device name” “Status” “Temperature” “Power status”“
SimPal-W230 WiFi Temperature Plug
9
Device name: the name register when add the device. Use to
separate different device.
Status:
“online”: means this device connected with server, can
be control via APP.
“offline”: means the device disconnect with
server, can not be controlled via APP. Device will auto online
again when it connected WiFi.
Temperature: It will show latest environment temperature of
this device, auto update every 30 seconds.
Power status:
ON: means the power plug output is ON
OFF: means the power plug output is OFF.
2.5 Power control
On Power control page, it can remotely on/off power, delay turn on power, also can pairing remote
controls and wireless sensors.
SimPal-W230 WiFi Temperature Plug
10
Power ON: turn plug power output on.
Power OFF: turn plug power output off.
Delay 1-3600 seconds turn off power: input the time value and
select this option, it will turn on power immediately and turn off
after settings times.
Delay 1-3600 seconds turn on power: input the time value and
select this option, it will turn off power immediately and turn on
after settings times.
Pair auto control sensors: use to pair sensor working with
power plug. When sensor trigger, it will trigger delay control
function. The time value is same as last settings. Such as set
delay 30 seconds turn off power, when sensor trigger, it will
turn on power immediately, and auto turn off after 30 seconds.
Pair remote control: use to pair remote control. User can use
remote control to turn off power, turn on power and trigger
delay control function. Delay control time is same as last
settings.
(Noted: only W230-F model support sensor and remote control.)
SimPal-W230 WiFi Temperature Plug
11
2.6 Temperature settings
On Temperature settings page, it can set plug working as thermostat, set plug auto push message
when temperature out of setting range.
Thermostat Control: it can set plug working as thermostat, the function of two working mode as
following:
A. Warming mode: when temperature higher than
“Higher temp”,
power will auto turn off. When temperature lower than
“Lower
temp
”, power will auto turn on.
B. Cooling mode: when temperature higher than
“Higher temp”,
power will auto turn on. When temperature lower than
“Lower
temp
”, power will auto turn off.
Temperature alarm: set temperature range, when temperature
out of range, it will auto send message.
SimPal-W230 WiFi Temperature Plug
12
2.7 Schedule settings
On Schedule settings page, it can set plug auto turn on/off according the schedule settings.
Schedule Control: auto turn on/off power according the setting
schedule.
Schedule Alarm: pug will auto set in alarm mode according the
setting schedule.
SimPal-W230 WiFi Temperature Plug
13
2.8 Alarm settings
(Only W230-F model support this function)
On Alarm settings page, it can set alarm sensors and wireless siren. The wireless sensor and siren
need to buy separately. Only customization FSK sensor can working with the plug.
Alarm: when alarm set ON, it will push message and turn on
wireless siren when sensor trigger. When alarm set OFF, it will
ignore sensor signal.
Siren alarm: when set ON, it will turn on siren, siren will loud
sound immediately. Set OFF, it will turn off siren immediately.
Beeper alarm: when set ON, plug built-in beeper will beep 10
seconds when sensor alarm. When set OFF, beeper will no beep
even sensor alarm.
Alarm sensor: max can pair 10pcs sensor, input the sensor name
and click
“Pair”, after hear plug beep, trigger sensor to finish
sensor pair.
SimPal-W230 WiFi Temperature Plug
14
2.9 Reset factory settings
Reset factory settings will make the device removed from all registered APP account, Need to
register the device again on APP after reset. Keep press the M button for 10 seconds, device will
long beep and reset factory settings.
1.0 Technical Specification
Product size: 125*60*80 mm
(
EU plug)
WiFi protocol: 802.11 b/g/n
Power input: AC 110~230V
Temperature sensor range: -10
℃
~+50
℃
Indicator: Power output and wireless signal in Blue
Max power loading: 16A or 3600W
Standby power consume: 30mA
Working temperature: -10
℃
~+35
℃
(Indoor use only)