PDF User Manual

  1. Home
  2. Manuals
  3. Sharp XE-A101 Quick Start Manual

Sharp XE-A101 Quick Start Manual

Made by: Sharp
Type: Quick Start Guide
Category: Cash Register
Pages: 1
Size: 0.08 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

XE-A101  Quick Start Guide

English

The following describes how to get your cash register ready to operate.  Follow these steps when you use the cash register for the first time.

The buzzer will sound three times.

3. Now the cash register has been

initialized. The register display will
show “0.00” with “

l

” .

2. Insert the plug of the power cable

into the AC outlet.

   

 IMPORTANT

This operation must be performed
without batteries loaded.

To ensure the cash register operates
properly, initialize it using the following
procedure:

1. Set the mode switch to the REG

position with the power cable
unplugged.

1

Initializing the Cash

Register

REG

X/F

Z/PGM

VOID

OFF

The following are supplied with your

cash register.

1 paper roll

2 drawer lock keys

1 instruction manual (English)

1 instruction manual (Spanish)

1 Quick Start Guide
1 ink roller (pre-installed)

1 take-up spool

For further information, please read the instruction manual.

Printed in Korea/Impreso en Corea        O(TCADH2395BHZZ)

1

2

 Installing Batteries

Install batteries for back-up of sales data
and programmed contents.

1. Push the printer cover forward and

detach it.

2. Open the battery cover next to the

paper roll cradle.

View from rear

3. Insert three new 

AA

 batteries.

(Batteries are not supplied with the
cash register.)

Installing a Paper

Roll

1. Push the paper roll release lever and

install the paper roll so that the paper
unrolls from the bottom.

2. Insert the paper straight into the

paper inlet, and press the 

f

f

f

f

f

 key.

    The inserted end comes out at the

printing area.

3. (For journal printing) Insert the top

end of the paper into the slit in the
take-up spool shaft and wind the
paper two or three turns. Then place
the take-up spool on the bearing.

4. Attach the printer cover.

(For receipt printing, step 3 should be
omitted.)

Basic Programming

Set the mode switch to the Z/PGM postition.

5

  Now, you are ready!

Before Starting Entries

Set the mode switch to the REG

postition.

NOTE

Your cash register is pre-programmed so that you can
use it with minimum set-up. To change the settings, see
the instruction manual.

Initial settings

Departments 1-4: Taxable 1
Departments 5-8: Non-taxable

where

R: Tax rate (0.0000% to 99.9999%)x10000

    (Enter the rate in 6 digits. Leading zeros may be

omitted.)

Q: Minimum taxable amount (0.01 to 99.99)x100

(Smallest amount for which tax must be collected. )

*Up to 4 types of tax are programmable.
Example:

Setting Tax Rates (%)

Specify a tax rate (%) for calculation of tax on each
taxable subtotal using the following sequence:

Setting

 the Date

Enter the date in 6 digits using the month-day-year

format. Press the 

#/

SBTL

 key once to program the next item

or twice to exit the programmig mode.

Example:

Setting the Time

Enter the time in 4 digits (“hhmm” format) using the 24 hour

system. Press the 

#/

SBTL

 key once to program the next item

or twice to exit the programming mode.

Example:

Before Starting Entries

Set the mode switch to the REG

postition.

Enter a clerk code (1-4) and press

 

CLK#

.

(Once the clerk code entered, re-entry
of the clerk code is not needed until
the clerk is changed.)

Clerk code

Registration Example

(When the Customer Pays by Cash)

Reading and Resetting

X Reports (reading)

Set the mode switch to the X/F position

and press 

.

Z Reports (reading and resetling)

In the Z/PGM mode, press 

.(In this

case, grand total resetting is not performed.)

Flash Reports (displayed but not
printed)

In the X/F mode:
Press dept. key for dept. sales reports

Press 

#/

SBTL

 for sales total reports

Press 

CH

 for cash-in-drawer reports

REG

X/F

Z/PGM

VOID

OFF

Time(2:30 p.m.)

#/

SBTL

#/

SBTL

Date(March 15, 2002)

#/

SBTL

#/

SBTL

Tax 1 

#/

SBTL

@/TM

@/TM

Tax rate(7.0000%) 

Min. taxable
amount($0.11)

9

 ➝ 

#/

SBTL

 ➝

 

Tax number (1-4)* 

➝ 

@/TM

 ➝ 

R

➝ 

@/TM

 ➝

 Q

 ➝ 

REG

X/F

Z/PGM

VOID

OFF

1

CLK#

View from rear

Clerk code

CLK#

1

5

3

7

Price and dept.

Price and dept.

Amount tendered

#/

SBTL

4. When the batteries are properly installed,

l

l

l

l

l

” 

on the display will disappear.

Close the battery cover.

IMPORTANT

Improper use of batteries may damage
the cash register. Please take the
following precautions.

•Be sure that the positive (+) and negative

(-) poles of each battery are oriented
properly.

•Never mix batteries of different types.
•Never mix old batteries and new ones.

Please read the instruction manual for
other battery handling precautions.