Full Text Searchable PDF User Manual
Piranha Phantom
Vacuum Cleaner
For Household Use Only
Model No.: VC4501(A)-5
Item No.: 900656
240Va.c. 50Hz
2400W Max
Rev 3
Note
: The specifications and/or components of this appliance are subject to change without prior notice.
If the Hose, Floor Head or any Accessories should fail during use, please call 1800 079 124 for an immediate
replacement. This will save you from returning the product to the store.
If we can assist you in any other way, please feel free to contact us
Page 2 of 16
1
Warnings .................................................................................. 3
2
Safety Direction ....................................................................... 3
3
Transporting your Vacuum .................................................... 6
4
Specification ............................................................................ 6
5
Schematic Wiring Diagram ..................................................... 6
6
Components ............................................................................ 7
7
Assembly Method ................................................................... 8
7.1
Fitting Flexible Hose ............................................................. 8
7.2
Hose Removal ....................................................................... 8
7.3
Fitting Telescopic Tube and Accessories ........................... 8
7.5
Tools ...................................................................................... 9
7.6
Tool Holder............................................................................ 9
8
Power and Power Cord ........................................................... 9
9
Suction Relief Valve .............................................................. 10
10
Floor Head ............................................................................. 10
12
Safety Devices Operation ..................................................... 11
13
Emptying the Dust Canister ................................................. 11
14
User Maintenance ................................................................. 12
14.1
Cleaning Filters ................................................................... 12
14.1.1
Pre Motor Foam Filter ............................................................... 13
14.1.2
Main Filter .................................................................................. 13
14.1.3
Exhaust Air Filter ...................................................................... 14
14.2
Cleaning the Vacuum Cleaner and Components.............. 15
15
Troubleshooting .................................................................... 15
16
Warranty Against Defect ...................................................... 16
Page 3 of 16
1 Warnings
Before using this appliance, read and follow all warnings and instructions in
this manual, even if you are familiar with this product.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Young children should be supervised to ensure that they do not play with the
appliance.
2 Safety Direction
Please read this instruction manual carefully before first use. It is advisable to
keep this instruction manual for future reference.
DO NOT
vacuum water, wet objects, liquids, ashes, hot coals, cigarette
butts, matches or any hot, smoking or burning objects, etc.
DO NOT
pick up flammable or combustible materials (i.e. lighter fluid, petrol,
kerosene, etc.) or use in the presence of explosive liquids or vapour.
DO NOT
pick up toxic material (i.e. chlorine bleach, ammonia, drain cleaner,
etc.)
DO NOT
vacuum Toner (for laser printer, copy machines etc) as there is a
risk of fire and explosion.
DO NOT
vacuum plaster, cement etc. as the filter can become blocked.
DO NOT
use the vacuum without all the filters fitted.
DO NOT
store or use the appliance near high temperature areas.
DO NOT
run over the power cord with the vacuum cleaner.
DO NOT
use the vacuum cleaner if it is blocked. Turn off and clear all
blockages before continuing.
DO NOT
use the vacuum cleaner with blocked filters. Clean filters before
continuing. (refer to User Maintenance section).
Page 4 of 16
DO NOT
use the vacuum cleaner if the appliance malfunctions, abnormal
noise, smell, smoke, is dropped or damaged in any manner or any breakage
is found during operation.
Return appliance to the nearest authorised service agent or similarly qualified
person for a thorough examination, repair, electrical or mechanical
adjustment.
DO NOT
misuse the cord. Never pull the appliance by the cord or pull to
disconnect it from the outlet. Instead, grasp the plug and pull to disconnect.
DO NOT
use the vacuum cleaner to pick up large objects, hard or sharp
objects such as glass, nails, screws, coins, etc. that are likely to cause
damage.
DO NOT
use with damaged cord or plug.
DO NOT
use vacuum cleaner if it has been dropped, damaged, left outdoors,
or dropped into liquid (water etc).
DO NOT
close door on cord, or pull cord around sharp edges or corners.
Cord Rewind -
DO NOT
allow the cord and plug to whip back at full speed.
Guide the cord and plug in gently.
DO NOT
handle plug or vacuum cleaner with wet hands.
DO NOT
put any objects into openings.
DO NOT
use with any openings blocked and do not restrict airflow.
DO NOT
operate the appliance with a damaged cord or plug.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
DO NOT
use without filters in place.
DO NOT
attempt to modify this product in any way.
DO
empty the Dust Canister regularly for optimal operation of the vacuum.
Page 5 of 16
DO
keep hair, loose clothing, fingers, feet and body parts away from
openings or moving parts.
DO
disconnect the appliance from the mains supply before connecting the
flexible suction hose.
DO
turn off controls before you connect or disconnect the appliance to or
from the mains supply.
DO
disconnect the appliance from the power supply when not in use, before
changing the dust filter, cleaning the filters or connecting / disconnecting the
accessories.
DO
use only on dry, indoor surfaces.
DO
use only as described in this manual. Use only manufacturer's
recommended attachments.
DO
Keep cord away from heated surfaces.
DO
Keep all openings free of dust, lint. hair, and anything that may reduce
airflow.
DO
use extra care when vacuuming on stairs.
DO
keep your work area well lit.
DO
store your appliance indoors in a cool. dry area.
DO
ensure children and babies cannot play with plastic bags or any
packaging materials.
DO
operate the appliance from a power source of the same voltage,
frequency and rating as indicated on the product identification plate
If this appliance is used by a third party,
DO
supply the instruction manual
with it.
No liability can be accepted for any damage caused by non-compliance with
these instructions or any other improper use or mishandling of appliance.
Page 6 of 16
This product has not been designed for any uses other than those specified
in this manual.
ONLY
for domestic use. Industrial or commercial use invalidates the
warranty.
Read and Save These Instructions
3 Transporting your Vacuum
To move your vacuum cleaner from room to room, unplug the unit and carry
using the carry handle.
Never pull or carry the vacuum cleaner by its cord.
Never carry the vacuum cleaner by the flexible hose.
4 Specification
Supply:
240Va.c. 50Hz
Rated Power:
2400W Max
5 Schematic Wiring Diagram
Page 7 of 16
6 Components
1
Dust Canister Release Button
9
Crevice Tool
2
Dust Canister
10
Floor Head
3
Hose
11
Suction Strength Control Slide
4
Hose Connector
12
Handle
5
Tool Holder
13
Cord and Plug
6
Hose Coupling
14
Cord Rewind Button
7
Telescopic Tube
15
Exhaust Grille & Filter
8
Upholstery Tool
16
On/Off Switch Button / Variable Speed Controls
3
6
5
1
7
8
9
2
4
10
16
13
14
15
11
1
Page 8 of 16
7 Assembly Method
Please Note:
Always remove the plug from the power socket before fitting or
removing accessories.
Ensure all Filters are fitted, and fitted correctly before using.
7.1 Fitting Flexible Hose
Insert the coupling end of the vacuum cleaner
hose (6) into the Hose Connector (4) and push
inward until it locks into place.
The side locking buttons (which are located on
the sides of the hose coupling) must be
horizontal when pushing in.
7.2 Hose Removal
To remove flexible hose from the vacuum cleaner,
push the buttons in which are located on the sides of
the hose coupling and then pull the coupling straight
out.
7.3 Fitting Telescopic Tube and Accessories
•
Insert the handle (1) into the upper end of the
telescopic tube (2).
•
Insert the lower end of the telescopic tube (4)
into the Floor Head (3).
•
To adjust the length of the telescopic tube, press
the telescopic tube lock button (5) down, and
then pull the handle and tube out to the desired
length.
Page 9 of 16
7.5 Tools
The Crevice tool is used for cleaning down the
side of sofas and into corners, etc.
The Upholstery tool is used for cleaning sofas
and curtains, etc.
7.6 Tool Holder
There is a convenient tool holder on the
telescopic tube where the Crevice tool and
Upholstery tool can be stored when not in use.
Simply push the tools onto the location
spigots, or to remove, simply pull up and off.
8 Power and Power Cord
•
Before using the appliance, unwind the cord fully up to the yellow mark
and insert the plug into the power supply.
The yellow mark on the cord shows the ideal cord length.
•
Do not extend the cord past the red mark.
Note
: To rewind the cord, press the Cord Rewind
Button whilst controlling the cord with the other hand
to ensure that it does not whip back causing damage
to your person or surroundings.3
•
Press the On / Off button.
•
You can adjust the vacuum cleaner power by rotating
the On / Off button clockwise or anti-clockwise.
•
Decrease power for cleaning curtains, books,
furniture, etc.
•
Increase power for cleaning the bare floor.
Page 10 of 16
9 Suction Relief Valve
The Suction Relief Valve is used for easy, temporary reduction of the
vacuum cleaner suction at the floor head.
Slide the Suction Control Slide to the open position to reduce the suction
power and then slide close to revert back to full suction power at the floor
head.
10 Floor Head
The floor head is adjustable to suit either hard floors
or carpets.
The floor head has two settings. When cleaning
hard surfaces (parquet flooring, tiles, etc.), the floor
head brushes should be extended.
When cleaning carpets and rugs, the brushes
should be retracted into the floor head.
Press the brush change button to switch between the
two settings.
Note
: If, during vacuuming, you need to pause to move furniture etc., you
can place the floor head in the parking holder using the hook on the back
of the floor head.
Page 11 of 16
12 Safety Devices Operation
NOTE
: The motor has an overheating protection device built in.
It will automatically switch off power to the motor if it overheats. e.g. from
blocked nozzles, full dust Canister or uncleaned blocked filters.
If this happens, turn off the vacuum and unplug from power socket, clean
blockage and / or filters and allow to rest for at least 60 minutes which should
be enough time for the motor to cool down.
Important
: If the over-temperature device activates and turns the motor off,
and you do not unplug the appliance from the power point, the motor will
restart automatically after it has cooled down enough to reset the safety
device.
NOTE
: The vacuum cleaner has a Vacuum Suction Relief Valve built into the
handle of the dust canister.
NEVER BLOCK THIS OPENING
.
13 Emptying the Dust Canister
Empty the Dust Canister as frequently as possible or when the suction power
is reduced.
•
To remove the Dust Canister, turn off the power and unplug.
•
Grip the handle on the Dust Canister, press
the Dust Canister Release Button and pull
the Dust Canister forward and out of the
housing.
•
Take the dust container to a dustbin.
•
Press the Trap Door release button on the
lower part of the handle and the trap door will
open emptying the contents into the bin.
Page 12 of 16
•
To close the trap door, close it manually until it clips shut.
•
Brush the inside of the dust canister with a small brush or wash
Refer to section “Cleaning Filters”.
14 User Maintenance
WARNING
: The plug must be removed from the power socket before any
maintenance or replacement.
NOTE
: To maximise the performance of your vacuum cleaner, you should
clean your filters regularly.
If the filters are broken or worn, replace them before continuing to use the
vacuum.
Filters can be purchased from our Customer Service. You can call our
customer service toll free number: 1800 079 124 or via email
info@hegroup.com.au
14.1 Cleaning Filters
Important Note
– the Filters must be cleaned regularly for best suction
performance and to prevent over-heating and damage to your vacuum
cleaner.
Cleaning is best done at the same time when emptying the dust Canister
after you have finish vacuuming for the day.
NOTE
: Never use the vacuum cleaner with wet or damp filters or without
ALL filters fitted.
Using wet or damp filters will damage the filters, may cause serious
damage to the vacuum cleaner and will void your warranty.
Page 13 of 16
14.1.1 Pre Motor Foam Filter
Remove the Dust Canister as described prior.
The Pre Motor Filter is located in the top section of
the Vacuum cleaner where the Dust Canister was
removed from.
Remove this Filter by rotating it and pulling out of its
recess.
Remove the foam from the holder and wash
the foam filter in warm mild soapy water,
rinse in clean fresh cold water and let dry.
Only clean the white filter if it is very dirty.
wash the filter in warm mild soapy water,
rinse in clean fresh cold water and let dry.
DO NOT
scrub the filter or place in a dishwasher.
DO NOT
use a hair drier to dry the filter.
NOTE
: Never use the vacuum cleaner with wet or damp filters. Using
wet or damp filters will damage the filters, may cause serious damage to
the vacuum cleaner and will void your warranty.
Place the Foam Filter back in its recess (or replace with a new one) then
reinsert into the Vacuum Cleaner.
14.1.2 Main Filter
Remove the Dust Canister from the vacuum cleaner.
Remove the filter assembly from the top of the dust
canister by rotating clockwise and pulling upward.
Wash the Foam Filter in warm mild soapy water, rinse
in clean fresh cold water and let dry.
Only clean the white filter if it is very dirty.
wash the filter in warm mild soapy water,
rinse in clean fresh cold water and let dry.
Page 14 of 16
DO NOT
scrub the filter or place in a dishwasher.
DO NOT
use a hair drier to dry the filter.
Refit once dry (or replace with a new one).
14.1.3 Exhaust Air Filter
The exhaust air filter cleans the air a final time before it leaves the
vacuum cleaner.
You can access and clean the exhaust air filter as
follows: (this is located at the rear of the vacuum
cleaner)
Press down the latch tab and pull open the Rear
Exhaust Air Grille.
Remove the Filter from the Rear Exhaust Air Grille.
Wash the Filter in warm mild soapy water, rinse in
clean fresh cold water and let dry before refitting.
DO NOT
scrub the filter or place in a dishwasher.
DO NOT
use a hair drier to dry the filter.
NOTE
: Never use the vacuum cleaner with wet or
damp filters. Using wet or damp filters will damage the
filters, may cause serious damage to the vacuum
cleaner and will void your warranty.
Refit the Filter to the Rear Exhaust Air Grille (or replace
with a new one)
Close the Rear Exhaust Air Grille.
Page 15 of 16
14.2 Cleaning the Vacuum Cleaner and Components
Do not clean the vacuum cleaner, components or accessories using
petrol or any other flammable liquid or solvents, etc.
Clean only the outside of the vacuum cleaner.
Use only a moist cloth and mild detergent for cleaning the vacuum
cleaner, components and accessories.
After cleaning, wipe off the moisture on vacuum cleaner, components
and accessories with a dry cloth.
Do Not
place accessories and components in a dishwasher.
15 Troubleshooting
Noisy operation
Clean the Filters and empty the Dust Canister
Suction Not Strong
Clean the Filters and empty the Dust Canister.
Check for blockages and unblock
Check that the Suction Relief Valve on the hose handle is
closed.
Check that the Motor speed control knob is set to Max
suction Power
Over-heating / Stopping
Clean the Filters, empty the Dust Canister, check for
blockages and unblock then allow it to cool for up to hour
before trying to restart.
Floor Brush hard to push
Due to the strong suction of your vacuum cleaner, it may be
difficult to push, especially over thick carpet. Rather than
force the Floor Brush, lift the Floor Brush momentarily to
allow air to flow into the vacuum releasing the built up
suction pressure, then continue vacuuming.
Slide open the vacuum Suction Relief Valve located on the
hose handle. This will reduce suction to the floor head.
Adjust the Motor speed control knob to a lower power level
Page 16 of 16
16 Warranty Against Defect
WHAT’S COVERED?
1.1 H.E. Group Pty Ltd (“us” “we” or “our”)
warrants this good for a full replacement or
refund for a period of twelve months from
the date of purchase.
1.2 This warranty covers materials and
workmanship defects only.
5.2 Our goods come with guarantees that cannot be
excluded under Australian Consumer Law. You
are entitled to a replacement or refund for a
major failure and compensation for any other
reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a
major failure.
5.3 Notwithstanding 5.1, except as provided for in
this warranty, all express and implied warranties
and conditions under statute or general law as
to the merchantability, description, quality,
suitability or fitness of the goods for any
purpose, or as to design, assembly, installation,
materials or workmanship or otherwise are
(where permitted under law) expressly
excluded.
5.4 To the extent permitted by law, our total liability
for loss or damage of every kind related to the
good in any way whatsoever is limited to the
amount paid to the retailer by you for the good
or the value of the good.
WHAT IS NOT COVERED?
2.1 This good is for household use only and if
used in any way other than as detailed in
the instruction manual will void this
warranty.
2.2 This warranty does not apply to defects
arising from abuse, alteration, unauthorised
or unreasonable use of the good, nor does
it cover general deterioration due to usage.
2.3 This warranty does not apply to accessories
due to general deterioration or acts beyond
human control.
WHAT WE WILL DO
3.1 We will replace the good or provide a
refund to the value of the purchase price, if
a defect is discovered in the good during
the warranty period of twelve months
subject to verification of defect or
malfunction and the date and proof of
purchase and purchase price.
5.5 These terms and conditions supersede and
exclude all prior and other discussions,
representations (contractual or otherwise) and
arrangements relating to the supply of the goods
or any part of the goods. This includes
representations not made by us relating to the
performance of the goods or any part of the
goods or the results that ought to be expected
from using the good.
CUSTOMER CARE
6.1 To claim under this warranty, you must first
contact our friendly customer service team on
free call 1800 079 124 or via email
info@hegroup.com.au and explain the basis of
your claim. Our customer service team will then
provide you with directions on how to make your
claim under this warranty.
WARRANTY COSTS
4.1 Once we have received the goods and you
have complied with the warranty, our costs
associated with the warranty claim will be
borne by us.
4.2 No responsibility will be taken for goods
lost, mislaid or damaged whilst in transit.
GENERAL
5.1 The benefits of this warranty are additional
to any other rights and remedies you may
have under law.
6.2 This warranty is valid with the presentation of the
original proof of purchase receipt or tax invoice
originating from the store of purchase for the
product showing the retailer’s name, date of
purchase and amount paid, by you, for the
good.
Address:
Phone No:
Email:
HE Group Pty Ltd, 47 Stephenson Street, Cremorne, Victoria 3121
1800 079 124 (free call)
info@hegroup.com.au
April 2011 Edition