PDF User Manual

  1. Home
  2. Manuals
  3. Panasonic SiriusXM CQ-RXBT490U User Manual

Panasonic SiriusXM CQ-RXBT490U User Manual

Made by: Panasonic
Type: User Manual
Category: Car Stereo System
Pages: 10
Size: 1.04 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

36

CQ-RXBT490U

English

 SiriusXM Satellite Radio Control

Operation Flow 

Connecting SiriusXM Tuner 

Connect the optional SiriusXM Connect Vehicle Tuner.
Refer to the installation instructions included with the 
SiriusXM receiver and this unit.

Getting started 

A SiriusXM subscription (sold separately) is required 
to receive programming. You can subscribe by calling 
SiriusXM listener care or by going on line - see below 
for details.

1

 Press 

[SOURCE]

 to select the SiriusXM

mode.

2

 Check the Radio ID.

¡ 

Write down the Radio ID from your SiriusXM 
Connect Vehicle Tuner.

¡

 To show the Radio ID on the display, tune to 

channel 0. (Refer to “Channel Selection”.)

Radio ID display 
(example)

2

 Activate the SiriusXM Satellite Radio by call-

ing or going on-line:

¡

 Web site: 

http://www.siriusxm.com/subscriptions

¡

 Phone number: 1-800-967-2346

Note

: The Radio ID does not use the letter I, O, S, or F.

Band selection 

Press

[BAND]

 to change the band.

Channel selection 

[

d

]

: Next available/subscribed channel

[

s

]

:  Preceding available/subscribed channel

Hold down for seek forward/reverse.

Note

: “CH LOCKD” is displayed if a channel is selected 

that has been locked by the parental lock setting, 
follow the procedure next on “Channel unlocking” to 
unlock the channel.

Channel unlocking (passcode entry)

To receive a channel locked by a parental lock, a pass-
code needs to be entered after tuning to the channel. 
(Refer to page 39 for parental lock setting.)

1

 Tune to a channel locked by a parental lock. 

 

 

2

 Enter a number for each fl ashing digit.

Turn 

[VOL]

 

: Selects number 0 to 9.

Push

[VOL]

 

: Selects next digit to be entered.

[SOURCE]

selects a source. 

[BAND]

selects a band in the SiriusXM 
source. 

[

6

] [

7

]

selects an 

available/subscribed channel.

Preset buttons [1]

 through 

[6]

select a preset channel in the SiriusXM source, preset 
the current channel (by holding it down for more than 
2 seconds).

[

{

] [

}

] (FOLDER)

skip to the previous/next category.

[VOL]

selects a menu or number 

(PUSH SEL

 :Select

)

selects items in the selection 
mode.

 


background image

37

CQ-RXBT490U

English

 

A digit where entry is determined is indicated as 

*

”.

When a 4-digit number code is correctly entered 
and

[VOL]

 is fi nally pressed, the all locked channels 

are unlocked and start to be received. (Once turns 
ACC ON/OFF, the channels return to previous locked 
status)

Notes

:

¡

 If a wrong number code is entered when selects 

a locked channel, “WRONG CO” is displayed and 
returns to Channel 1.

¡

 If 10 seconds elapse before determining the entry 

of the number code, “TIME OUT” is displayed and 
returns to previous channel.

¡

 To exit the passcode entry, press 

[DISP]

and returns 

to previous channel.

¡

 To change the parental lock passcode, refer to page 

39 for setting.

SiriusXM Display

Band

Channel number Preset Number

Signal strength indicator

when the optional SiriusXM Connect 
Vehicle Tuner is connected to this unit.

Channel preset

Up to 6 channels can be preset in SXM1 to SXM3 
respectively.

1

 Use manual or seek tuning to tune into a 

channel.

2

 Press and hold one of the preset buttons 

[1]

through

[6]

 until the display blinks once.

Preset Number

 blinks  once

Note

: New channels overwrite existing saved channel 

after this procedure.

Preset channel selection

Press the corresponding preset button 

[1]

through

[6]

 to tune in a preset channel.

Selection by category

Category setting

You can toggle the category selection mode ON and 
OFF every time you press and hold 

[BAND]

 for more 

than 2 seconds. If the category is set to ON, the unit 
operates as follows for each button:

Notes

:

¡

 When category is set to ON, the letter “c” is dis-

played followed by channel number.

¡

 When category selection mode is active, as indi-

cated by “c”, the preset buttons are disabled. Turn 
off category selection mode to re-enable the preset 
buttons.

Category selection

[FOLDER

}

]

:  Next category

[FOLDER

{

]

:  Preceding category

Channel selection

[

d

]

:  Next available/subscribed channel in cur-

rent category

[

s

]

:  Preceding available/subscribed channel 

in current category

Note

: The simulate category of “All Channel” is select-

able in category selection.

 


background image

38

CQ-RXBT490U

English

 SiriusXM Satellite Radio Control (continued)

Display change

Press

[DISP]

 (Display) to change the display of 

different metadata information.

Band/
channel number

(Data reading)

(Data reading)

(Data reading)

(Data reading)

(Data reading)

Channel name 

Artist name

Song title

Information of 
contents

Category name

 Clock

Note

: “– – – –” is displayed when there is no informa-

tion on the selected channel.

Function settings

Channel direct selection mode

A channel can be directly selected.

1

 Press 

[MENU]

.

2

 Turn 

[VOL]

 clockwise or counterclockwise to 

select MENU “SXM”.

3

 Press 

[VOL] (PUSH SEL)

.

4

 Turn 

[VOL]

 clockwise or counterclockwise to 

select “D

TUNING”.

5

 Press 

[VOL] (PUSH SEL)

.

6

 Enter a number for each fl ashing digit.

Turn 

[VOL]

 

: Selects number 0 to 9.

Push

[VOL]

 

: Selects next digit to be entered.

Note

:  When next digit is not entered (displayed with 

“_”), then press 

[VOL}

 will end number input and 

switch to the desired channel directly.

7

 Press 

[VOL] (PUSH SEL)

 when done enter-

ing the channel number digits and the radio 
tunes to the desired channel.

[DISP]

 (Display) 

switches the information 
on the display. 

[

6

] [

7

]

selects an 

available/subscribed channel.

[VOL]

selects a menu or number 
selects a channel to be locked 
or unlocked.

(PUSH SEL

 :Select

)

selects items in the selection 
mode.

[MENU]

selects items in the 
SXM menu.

 


background image

39

CQ-RXBT490U

English

Notes

:

¡

”CH UNAVL” is displayed when the requested chan-
nel is not valid. Visit www.siriusxm.com to see the 
list of channels available. 

¡

”CH UNSUB” is displayed when the requested chan-
nel is not part of the current subscription package. 
Visit www.siriusxm.com for information on sub-
scription packages.

Parental lock setting mode

1

Press

[MENU]

.

2

Turn 

[VOL]

 clockwise or counterclockwise to 

select MENU “SXM”.

3

Press

[VOL] (PUSH SEL)

.

4

Turn 

[VOL]

 clockwise or counterclockwise to 

select “P-LOCK”.

5

Press

[VOL] (PUSH SEL)

.

6

Enter a number for each flashing digit.

Turn 

[VOL]

: Selects number 0 to 9.

Push

[VOL]

: Selects next digit to be entered.

Note

:  (Default: 1111). If you want to initialize the 

passcode, press and hold 

[DISP]

for more than 10 

seconds while passcode entry, the 4-digit passcode 
will return to the default.

7

Press

[

d

]

 or 

[

s

]

 to select a channel. 

8

Turn 

[VOL]

 clockwise or counterclockwise 

to switch a select channel to be locked or 
unlocked.

unlocked

 

locked

Note

: Channel 0 (CH 0) and Channel 1 (CH 1) can not 

be locked.

9

When done selecting the locked channels, 
press

[VOL] (PUSH SEL)

 to exit the function 

setting.

To change the parental lock passcode: 

1

Press and hold 

[VOL] (PUSH SEL)

 for more 

than

 2 

seconds after “Parental lock setting 

mode steps 1 to 6”.

 

(New code 
entry mode)

2

Enter a number for each flashing digit.

Turn 

[VOL]

: Selects number 0 to 9.

Push

[VOL]

: Selects next digit to be entered.

3

Repeat step 

2

 to confirm the new code.

“CODE SET” is displayed for 2 seconds and the new 
code setting is finished, then returns to channel 
locked/unlocked setting display.

To set parental lock ON/OFF:

1

Press

[VOL] (PUSH SEL)

 to open lock ON/

OFF mode after “Parental lock setting mode 
step 1 to 8”.

2

Turn 

[VOL] (PUSH SEL)

 to switch between 

lock ON or OFF.

(Default)

 

3

When done selecting the parental lock ON/
OFF setting, press 

[VOL] (PUSH SEL)

 to exit 

the function setting mode.

 


background image

40

CQ-RXBT490U

English

Face Plate Removing 

1

Turn off the power. 

2

Press

[OPEN]

. The face plate will be opened. 

3

Push the face plate to the left.

4

Pull it out toward you.

5

Put the face plate in the case. 

Note

: Do not put the face plate other than the direction 

shown at below figure, since this may result in dif-
ficulty when closing the case cover.

Face Plate Mounting 

1

Fit the face plate with its left hole on the left 
pin provided on the main unit.

2

Fit the other hole on the other pin applying 
slight pressure.

Face Plate Removal Alarm

This alarm sounds to warn you not to forget to remove 
the face plate before leaving your car. This function is 
activated when security alarm is set to ON. 

Security Alarm Setting

 

1

Press

[MENU]

.

2

Press

[VOL] (PUSH SEL),

 and turn 

[VOL]

clockwise or counterclockwise to select 
“ALARM SET”. 

3

Press

[VOL] (PUSH SEL),

 and turn 

[VOL]

clockwise or counterclockwise to select.

ALARM OFF (default)

 cd

ALARM ON 

Note

: Once rotary operation is made, the setting is 

activated.

This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable. 

Notes

:

¡

Do not touch the contacts on the face plate and the main unit. Failure to observe this may cause poor contact.

¡

If dirt or other foreign objects deposit on the contacts, wipe them off with a clean and dry cloth. 

Anti-Theft System 

 


background image

41

CQ-RXBT490U

English

Notes on Discs

How to hold the disc

¡

Do not touch the underside of the disc.

¡

Do not scratch the disc.

¡

Do not bend disc.

¡

When not in use, keep disc in the case.

Printed side

Unusable discs

Do not use discs that fit any of the descriptions 
given below. Using these discs may damage the 
discs or cause the unit to malfunction.

¡

Special discs in a shape which is not round

¡

Partly or wholly transparent disc

Wholly transparent disc* Partly transparent disc

*Wholly semi-transparent disc may not be played 

back.

¡

Discs with adhered labels, etc. on them

Disc with adhered stick-
ers or tape

Labels created by a 
printer

Protective films or 
sheets

Disc accessories (stabi-
lizers, etc.)

¡

Damaged or deformed discs

Shoddily made discs

Discs with cracks, 
scratches or parts missing

Discs with burrs
Please remove the burrs before use.

Disc insert

The surfaces of new discs tend to be slippery. There-
fore, when using such a disc for the first time, it may 
not load satisfactorily even when it has been inserted 
into the unit. At a time like this, insert the disc into the 
unit as far as it will go until it is loaded properly.

¡

When inserting a disc into or ejecting and remov-
ing it from the unit, insert it straight in or eject 
and remove it straight out in parallel with the 
unit. Otherwise, the disc may be scratched or 
marked in the process.

¡

When inserting a disc, do not put one disc on 
another. Failure to observe this may cause the 
discs to be jammed.

Do not leave discs in the following places:

¡

Direct sunlight

¡

Near vehicle heaters

¡

Dirty, dusty and damp areas

¡

On seats and dashboards

Disc cleaning

Use a dry, soft cloth to wipe from the center outward.
Do not attach any seals or labels to your discs.
Do not write on the disc label in a heavy pen or 
ballpoint pen.

<Correct>

<Wrong>

Notes on CD-Rs/RWs

¡

You may have trouble playing back some CD-R/RW 
discs recorded on CD recorders (CD-R/RW drives), 
either due to their recording characteristics or dirt, 
fingerprints, scratches, etc. on the disc surface.

¡

CD-R/RW discs are less resistant to high tempera-
tures and high humidity than ordinary music CDs. 
Leaving them inside a vehicle for extended periods 
may damage and make playback impossible.

¡

The unit may not successfully playback a CD-R/
RW that was made by the combination of writing 
software, a CD recorder (CD-R/RW drives) and a 
disc if they are incompatible with one another.

¡

This player does not play CD-R/RW discs if the ses-
sion is not closed.

¡

Be sure to observe the handling instructions of 
CD-R/RW discs.

¡

This player does not play CD-R/RW discs which 
contain other than CD-DA or MP3/WMA data.

 


background image

42

CQ-RXBT490U

English

Both of MP3 (MPEG Audio Layer-3) and WMA (Windows Media™ Audio) is a format for compressed audio 
file. These formats allow users to save all the files contained in approximately 10 pieces of existing CDs on one 
piece of CD-R/RW.

Note

: Each of encoding software is not included with this unit.

*MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

Cautions as to compressed audio files

Cautions as to the display of this unit

Compression formats

Compression method

Bit rate

VBR

Sampling frequency

MPEG 1 audio layer 3 (MP3)

32 k – 320 kbps

Yes

32, 44.1, 48 kHz

MPEG 2 audio layer 3 (MP3)

8 k – 160 kbps

Yes

16, 22.05, 24 kHz

MPEG 2.5  audio layer 3 (MP3)

8 k – 160 kbps

Yes

8, 11.025, 12 kHz

Windows Media Audio Ver. 2, 7, 8, 9*

64 k – 160 kbps

Yes

32, 44.1, 48 kHz

* WMA 9 Professional/LossLess/Voice are not supported.

Common

¡

High bit rate and high sampling frequency are 
recommended for high quality sounds.

¡

Selecting VBR (Variable Bit Rate) is not recom-
mended because playing time is not displayed 
properly and sound may be skipped.

¡

The playback sound quality differs depending on 
the encoding circumstances. For details, refer to the 
user manual of your own encoding software and 
writing software.

¡

Be sure to put an extension compatible with the 
format.

MP3

¡

It is recommended to set the bit rate to “128 kbps 
or more” and “fixed”.

WMA

¡

It is recommended to set the bit rate to “64 kbps or 
more” and “fixed”.

¡

Do not set the copy protect attribute on the WMA 
file to enable this unit to play back.

Display Information

¡

CD-TEXT

Disc title 
Track title

¡

MP3/WMA

Folder name, 
File name

¡

MP3 (ID3 tag)

Album name, 
Title name/artist name

¡

WMA (WMA tag)

Album name, 
Title name/artist name

Displayable characters

¡

Displayable length of file name/folder name: within 
64 characters. (Unicoded file and folder names are 
reduced by half in the number of displayable char-
acters.)

¡

Name files and folders in accordance with the stan-
dard of each file system. Refer to the instructions of 
writing software for details.

¡

ASCII character set and special characters in each 
language can be displayed.

ASCII character set

A to Z, digits 0 to 9, and the following symbols:
 (space) ! ” # $ % & ’ ( )  * + , - . / : ; < = > ? @ [ \ ] ˆ 

_ ` { | } ~

Notes

:

¡

Characters may be garbled depending on encoding 
software to be used.

¡

Undisplayable characters and symbols will be con-
verted into an asterisk ( ).

 Caution

Never put an extension indicating compressed audio (such as “.mp3” and “.wma”) to files other than 
compressed audio files. This may not only produce noise from the speaker damage, but also damage 
your hearing.

Notes on MP3/WMA

 


background image

43

CQ-RXBT490U

English

Recording MP3/WMA Files on a CD-Media/USB-Device

Copyright

It is prohibited by copyright laws to copy, distribute 
and deliver copyrighted materials such as music with-
out the approval of copyright holder except enjoying 
yourself personally.

No warranty

Above description complies with our investigations as 
of August 2011. It has no warranty for reproducibility 
and displayability of MP3/WMA.

Compressed audio file writing

¡

Do not save an audio file (CD-DA file) and a 
compressed audio file on the same disc. Failure 
to observe this may result in difficulty in playing.

¡

If compressed audio files formatted with two or 
more types are saved on the same disc, each 
format shall have a different folder.

¡

Do not write files other than compressed audio files.

¡

Playability may depend on the combination of writ-
ing software and disc writer to be used.

¡

This unit does not support the play list function.

¡

Write files in a disc-at-once manner unless other-
wise needed.

¡

You can shorten the duration between data read and 
playback by decreasing the quantity of files or fold-
ers, or the depth of the hierarchy.

Supported file systems

Q

CD-media

ISO 9660 Level 1/Level 2, Apple Extension to ISO 
9660, Joliet, Romeo

Note

: Apple HFS, UDF 1.50, Mix CD and CD Extra 

are not supported.

Q

USB-device

File system is FAT12/16/32.

Maximum number of files/folders

¡

Maximum depth of trees: 8 

¡

Maximum number of files 

CD-media: 512 
USB device: 65 535 

¡

Maximum number of files in one folder 

CD-media: 512 
USB device: 999 

¡

Maximum number of folders: 

CD-media: 128 (Root folder is included.) 
USB device: 256 (Root folder is included.) 

Notes

:

¡

You can shorten the duration between data read and 
playback by decreasing the quantity of files or fold-
ers, or the depth of the hierarchy. 

¡

This unit counts the number of folders irrespective 
of the presence or absence of an MP3/WMA file. 

¡

If the selected folder does not contain any MP3/
WMA files, the nearest MP3/WMA files in the order 
of playback will be played. 

¡

Playback order may be different from other MP3/
WMA players even if the same disc is used. 

¡

“ROOT” appears when displaying the root folder 
name.

¡

Empty folders stored on the USB memory are not 
included in the folder count. 

¡

Depending on the connected USB memory, the 
order in which the files are played back may differ to 
the order in which the files were stored. 

Folder selection order/file playback 

order

Q

CD-media

/

USB-device

Root Folder

(Root Directory)

Folder Selection

File Selection

Tree 1

Tree 2

Tree 3

Tree 4

Tree 5

Tree 8

(Max.)

1

3

2

q

q

w

e

r

t
y

y

4

5

1

5

In the order

In the order

 


background image

44

CQ-RXBT490U

English

If You Suspect Something Wrong 

Check and take steps as described below. 
If the described suggestions do not solve the problem, 
it is recommended to take the unit to your nearest 
authorized Panasonic Servicenter. The product should 
be serviced only by qualified personnel. Please refer 
the checking and the repair to professionals. 
Panasonic shall not be liable for any accidents arising 
out of neglect of checking the unit or your own repair 
after your checking. 

Never take measures especially those other than 
indicated by 

italic

 letters in “Possible Solution” 

described below because those are too dangerous 
for users to handle themselves. 

 Warning 

¡

Do not use the unit in an irregular condition, for 
example, without sound, or with smoke or a foul 
smell, which can cause ignition or electric shock. 
Immediately stop using the unit and consult your 
dealer. 

¡

Never try to repair the unit by yourself because it 
is dangerous to do so. 

Trouble Possible 

Solution 

Common

No power 

¡

Start the engine. (Alternatively, turn the ignition switch to the 
ACC position.)

¡

Verify the wiring. (Battery lead, power lead, ground lead, etc.) 

¡

Fuse blown (Consult your dealer or an authorized Panasonic 
Servicenter.)

¡

Ask a professional for fuse replacement. 

¡

Be sure to use the same rated fuse. 

No sound 

¡

Disable the mute function.

¡

Verify the wiring. 

¡

Wait until the dew disappears before turning on the unit. 

Noise

¡

Make sure that grounding is established properly. 

No sound from left, right, front, or 
rear speaker 

¡

Adjust the balance and fader. 

¡

Verify the wiring. 

Left and right sounds are reversed 

¡

Connect the speaker lead correctly. 

Disc Player

No sound, or disc is automatically 
ejected

.

¡

Load the disc correctly. 

¡

Clean the disc.

Sound skip, poor sound quality 

¡

Clean the disc.

Sound skip due to vibration 

¡

The maximum permissible tilt angle is 30°. 

¡

Secure the unit. 

Disc not ejectable 

¡

Press [

u

]. If the disc is still not ejected, consult your dealer or 

an authorized Panasonic Servicenter.

Radio

Frequent noise 

¡

Tune in to another station of high-intensity waves. 

¡

Make sure that the antenna mounted point is grounded properly. 

Preset data deleted 

¡

The preset memory is cleared to return to the original factory 
setting when the power connector or battery is disconnected. 

Troubleshooting

 


background image

45

CQ-RXBT490U

English

Trouble Possible 

Solution 

USB (MP3/WMA)

Music is not played back even if a 
USB device is connected. 

¡

Connect the USB device and USB extension cable correctly. 

¡

Check if there is any music data that can be played stored on the 
USB device.

¡

Use a USB device with a FAT12/16/32 file system.

¡

Use a USB device with a current consumption lower than 1 A. 

“READING” is displayed but music 
is not played back. 

¡

Do not use a USB Hub.

¡

When the USB device contains a number of folders/files, a long 
time may be taken to read all the files.

Bluetooth

®

Unable to register, connect, or call.

Devices incompatible with HFP (Hands-Free Profile) cannot be used. 

¡

Use devices compatible with HFP (Hands-Free Profile).

The mobile phone is not registered on this product.

¡

Connecting and calling with an unregistered mobile phone is not 
possible. Register the mobile phone on this product.

The mobile phone is not connected.

¡

Calling is not possible if the mobile phone is not connected to 
this product. Connect the mobile phone to this product.

The Bluetooth

®

 device can not pair/register with this unit successfully.

¡

Check the device Bluetooth

®

 setting is set to ON.

¡

Delete the paired memory within Bluetooth

®

 device and main 

unit, then pair again.

¡

Switch OFF and ON with device Bluetooth

®

 function, then pair 

again.

¡

Check the device PIN code, then input the correct PIN code for 
connection.

This unit and Bluetooth

®

 device are too far apart.

¡

Bring this unit and Bluetooth

®

 device closer together and try to 

pair again.

The other party in the call complains 
of echoing or noise. 

The voice of the other party heard from the car speakers is being 
picked up by the microphone and returned to the other party.

¡

Close the windows.

¡

Move the microphone away from the car speakers.

¡

Lower the volume.

Phone voice is of poor quality.
Phone voice is inaudible. 

Mobile phone reception is poor.

¡

Check mobile  phone reception.

Bluetooth

®

 audio does not work.

The Bluetooth

®

 audio-compliant device does not support A2DP/

AVRCP.

¡

Check the instruction manual of the Bluetooth

®

 audio-compliant 

device for support conditions.

Some mobile phones can not play music via Bluetooth

®

 if mobile 

phone is not in the music player mode.

¡

Operate mobile phone, select the music player mode, then press 
PLAY to play the desired music file via Bluetooth

®

 communica-

tion.