POSIFLEX PP-7600X User Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

Package Contents



PP-7600X POS Printer…………….(x1)



80mm-wide Thermal Paper………..(x1)
(For operational testing)



58mm Paper Spacer Plate………….(x1)



24V/60W Power Adapter………….(x1)



Power Cord………………………...(x1)



USB Cable…………………………(x1)



RS232 Cable (Optional)…………...(x1)



Soft Wiping Cloth………………….(x1)
(For shinning case only)



User Manual………………………..(x1)

Product Features



3" thermal printer with auto cutter



Printing speed up to 200 mm/sec



80 mm or 58 mm paper width support



Drop-and-load action for easy paper roll replacement



Control over 2 cash drawers through 1 D.K port



Interface: USB (True USB & Virtual COM selectable), Serial
and Ethernet



Paper near end sensor



Optional LD-2100 light bar modular

To avoid paper jam occurring, do NOT press the printer’s cover
open lever during printing.

When a paper jam occurs, press the cover open lever to release the
paper cover. Then, remove the jammed paper and reinstall the
paper roll. Next, close the paper cover properly and firmly.

If the auto cutter is also jammed, the paper cover will be locked.
Should the cutter jam be so serious to interfere the paper cover
release operation, please push the paper cover and press the cover
open lever several times. If the problem cannot be solved none the
less, please call your local service center for help right away.

PP-7600X

POS Printer

User Manual

19302901010 Ver. Original

http://www.posiflex.com

Views of the PP-7600X

Front View

Part Names

Description

Power Button

This button turns the printer power on or off.

Power LED Indicator

This indicator turns on when the printer power is
on.

Error LED Indicator

This indicator works when the printer has
something wrong. For more details, refer to the
Status LED Indicators section given below.

Paper-out LED
Indicator

This indicator turns on when the paper-out issue
occurs.

Feed Button

Press this button once to feed the paper roll for one
line. Hold down this button to continue feeding the
roll paper

Paper Cover

Open this cover when installing or replacing the
paper roll.

Cover Open Lever

Push this lever to open the paper roll cover.

Paper Exit

An opening where the paper is outputted

Paper-out LED Indicator

Wedge Groove

Power Button

Power LED Indicator

Error LED Indicator

Feed Button

Cover Open Lever

Paper Roll Exit

Paper Cover

Paper Near End Sensor

Paper Roller

Part Names

Description

Wedge Groove

Aligns and fixes the paper spacer plate

Paper Near End Sensor

(Provided for adjusting the detection position to suit
the diameter of the paper core used, and for
adjusting the detection position of remaining
amount of paper)

Rear View

Part Names

Description

I/O Cable Jack
for LD-2100

Connects the I/O cable of LD-2100

Printer Power
Connector

Connects the DC cable for the power adapter of PP-
7600X

Printer Power Connector

Cable Cover

I/O Cable Jack for LD-2100

Bottom View

Part Names

Description

I/O Ports

LAN port connector (RJ45)

USB connector (Type-B)

Serial port connector (DB9)

DK (Drawer Kick) connector (RJ10)

Fixing Screw Hole
for LD-2100

Formed for fixing the optional LD-2100 light bar

Wedge Groove
for LD-2100

Formed for fixing the optional LD-2100 light bar

I/O Ports of the PP-7600X

Rubber Foot

I/O Ports

Wedge Groove
for LD-2100

Fixing Screw Hole
for LD-2100

Serial (DB9) Port

D.K (RJ10) Port

USB Port (Type-B)

LAN (RJ45) Port

Loading a Paper Roll

Before loading a paper roll, make sure you use a specified paper type. Follow
the steps below to load a paper roll.
1.

Press down the cover open lever to
release the paper cover.

The paper cover ejects. Then, open the
paper cover manually.

Drop the thermal paper inside the paper
compartment of the printer, as shown in
the right figure.

Drag the paper roll to the portion where
the paper roller is installed.

Paper Roller

If you want to use a paper roll of 58mm
width, install the spacer plate in the
compartment of the printer, as shown in
the right figure, and then load the paper
roll of 58mm width into the partition at
the right side of the plate.

Next, set the paper width by using the PP-7600X software switch utility.
The software switch utility can be downloaded from the Posiflex’ global
website:

http://www.posiflex.com/en-global/Download/download

. To get more

detailed information on the paper width jumper setting, contact directly
the Posiflex’ technical service team.

To avoid the paper cover not being
locked completely, push the central
portion of the paper cover to close.

Push

Connecting Power Adapter and I/O Cables

Follow the steps listed below to open the rear cover and connect cables.

Hold the concave portion of the cable cover
with thumb, as shown in the circled portion
of the figure.

Pull the cover in the direction indicated by
the arrow in the right figure.

Remove the cable cover.

Connect power adapter to the printer power
connector of the PP-7600X.

Connect I/O cable(s) to the I/O port(s) of the
PP-7600X.

Remove

Connect
to I/O ports

Make the cable cover wedge to the printer.
Determine that the cable cover is well
wedged to the printer.

Cover the I/O ports of the printer.

Determine that the cable cover is completely
closed.

Installing the Posiflex LAN POS Printer Manager

To allow you to easily do settings of the LAN printer, please install the LAN
POS printer Manager Utility (Utility Name:

PP-7600 Series LAN and WIFI

POS printer Manager Utility

). To download the manager, go to the Posiflex’

global website:

http://www.posiflex.com/en-global/Download/download

download the up-to-date utility.

After downloading the manager utility, it is suggested to do settings through
USB interface.

However, to avoid users doing settings by mistake, it is suggested that
professional technicians implement the setup. To do more advanced settings on
the printer, contact directly the Posiflex’ technical service team.

Installing the USB Printer Virtual COM Port Driver

If you use software programs that communicate with your POS terminal via a
serial interface (e.g. COM1...COM8), but your POS system does not have any
serial port, you will require a so-called virtual COM port driver. This virtual
COM port driver allows you to assign a virtual COM port connection number
to your POS terminal connected via a USB port and enables bidirectional
communication between your POS terminal and the printer.

To download the USB Printer Virtual COM Port Driver, go to the Posiflex’
global website:

http://www.posiflex.com/en-global/Download/download

download the up-to-date driver of the PP-7600X printer.

After downloading the driver, start to install it. When you finish installing the
driver, it is suggested to turn on your POS terminal again. The system will
automatically detect the PP-7600X printer.

Firmly Closed

Installing the LD-2100 Light Bar (Optional)

Follow the steps below to install the LD-2100 light bar on the PP-7600X
printer.

Power off the printer when installing the LD-2100 light bar.

Securely connect the pin header of the LD-2100 I/O cable to the pin
connector on the LD-2100 control board.

Plug the RJ11 connector of the LD-2100 cable into the LD-2100 I/O
cable jack of the PP-7600X printer.

Install the LD-2100 light bar onto the bottom side of the PP-7600X by
making the four joints formed on the LD-2100 wedge to the four wedge
grooves formed on the PP-7600X.

Determine that the LD-2100 securely connects to
the PP-7600X.

Fix the LD-2100 to the bottom side of PP-7600X
with a screw.

The installation of LD-2100 light bar is
completed.

After installing the LD-2100 light bar, you can set up the LD-2100 by using
the Posiflex LD2100 Tool. For more detailed information, refer to the Posiflex
LD2100 Tool. To download the LD2100 Tool and its manual, go to the
Posiflex’ global website:

http://www.posiflex.com/en-

global/Download/download

Powering ON the PP-7600X Printer

Press the power button of the printer.

The power LED indicator stays bright and solid
green when the printer is powered ON.

LD-2100
Light Bar

Status LED Indicators

After supplying power to the PP-7600X and powering ON the printer, you can
read the system operation status from the power LED indicator on the printer.
The LED status is described below.

LED

Status

Description

Power LED

Solid green

System ON

Error LED

Flash red + several beeps

Cutter abnormal

Solid red

Cover open

Flash red

Operation temp. high

Paper-out LED

Solid red + continual beep

Paper out

Cleaning



Cleaning the Printer Case

Before cleaning the printer case, be sure to power off the printer, and wipe the
dirt off the printer case with a soft wiping cloth we provide.

Do NOT clean the product with alcohol, benzene, thinner, or
other such solvents. Doing so may damage or break the parts
made of plastic and rubber.



Cleaning

the Thermal Head and the Platen Roller

We recommends cleaning the thermal head to maintain receipt print quality.
We also recommend cleaning periodically (about once every 3 months).

Depending on the paper roll used, paper dust may stick to the platen roller and
the paper may not be fed correctly. To remove the paper dust, clean the platen
roller with a cotton swab moistened with water. Power on the printer only after
the water has completely dried.

After printing, the thermal head and its surroundings
can be very hot. Be careful. Let it be cool before you
clean it.

Do not damage the thermal head with your fingers or
any other hard object.

Troubleshooting



The printer cannot print

If you cannot print even though an error has not occurred, perform a self-test to
check if printing is possible.

Follow the steps below.
1.

Close the paper cover.

While pressing the feed button, power on the printer. (Hold down the feed
button until printing starts.) The current print status is printed.

Briefly press the feed button (less than one second) to continue the self-test.
The printer prints using the built-in character set. After the self-test printing,
the printer is reset and switches to standard mode.



LED Indicators are On/Flashing/Off

No lights is given by the LED indicators
Check whether the power supply cable is correctly connected to the printer and
the socket.

Error LED is on



Check whether the paper cover is closed.



Check if paper jam occurs or foreign substance enters the paper cutter.



The thermal head and its surroundings can be very hot. Printing stops if the
thermal head is too hot. Printing starts again automatically when the
thermal head temperature falls.

Paper-out LED indicator is on



Check whether the paper roll is correctly installed and any paper roll
remains.

Error LED indicator is flashing
Power off the printer; after 10 seconds, power it back on. If the error LED
indicator turns on again even after turning the power back on, malfunction may
occurs. Contact your dealer or Posiflex’ technical service team.

Specifications

General

Printer Reliability

100 Km print length

Auto Cutter Reliability 700,000 cuts or more

NV Bit Image Memory 12KB (max.)

NV Graphics

384KB (max.)

Receive Buffer

6KB

Printer Driver

Windows Driver (APD), OPOS, JavaPOS (Win),
CUPS Driver (Linux)

Software

Posiflex Uitlity (Android), PP-7600 Utility (Windows Desktop),
Development Tool (Android SDK), Monitoring Tool (RMS)

LED Indicators

Green LED - On = Power
Red LED - Error and/or Paper Out

Sensors

Cover Open / Out-of-Paper /Paper Near End

Cash Drawer Port
(CR port)

2 drivers (CR port x1)

Power Consumption

Approx. 1.5A (mean)

Power Source

AC adapter (24V DC)

Power Saving

Yes

Temperature

Print quality assured: +5

℃

~ +40

℃

Operating: 0

℃

~ +40

℃

Non-operating: -20

℃

~ +60

℃

Relative Humidity

Operating: 20 ~ 85%, non-condendensing 35% above for auto
cutter
Non-operating: 5% ~ 90%, non-condensing (paper excluded)

Acoustic Noise Level

55db

Standards
and Approvals

CE / FCC

Dimensions
(W x D x H)

5.08" x 5.86" x 5.1" / 129 x 148.8 x 129.5 mm

Weight

2.2lbs / 1kg

Color

Black / White

Print

Print Method

Thermal dot line printing

Print Speed

200 mm/second (max.)

Print Resolution

576 dots (W 8 dots/mm x H 8 dots/mm)

Print Direction

Vertical and Horizontal

Print Fonts

Fonts/Column capacity Font A: 12 x 24 48 cpl (default); Font B: 10 x24 57 cpl

Character Size

Font A: 1.25 x 3.00 mm; Font B: 1.13 x 3.00 mm

Character Set

95 Alphanumeric, 18 International, 128 x 43 Graphic

Barcode

UPC-A/E, EAN13/8, ITF, CODE39 / 93 / 128, CODABAR,
GS1 DataBar

2D Symbol Printing

PDF417, QR code

Media Handling

Type

Thermal roll paper

Paper Feed Methord

Friction feed

Print Width

72 mm

Paper Width

80 +0/-1 mm

Paper Loading

Drop-in

Roll Diameter (Max)

ɸ 83 (or 58) +0 / -1 mm

Core Diameter (Min)

ɸ 8 mm

Paper Thickness

60 ~ 80 um

Paper Guide

Yes

Auto Cutter

Yes

Connectivity

Serial Interface

RS-232

USB Interface

Built-in USB

Ethernet Interface

Ethernet 10/100Base-T/TX

Operating System

OS support

Android, Linux, Windows

※

The product information and specifications are subject to change without

prior notice. To get the detailed information on PP-7600X, please check this
model from Posiflex Global Website
(

http://www.posiflex.com/en-global/Download/download

<MEMO>