PDF User Manual

  1. Home
  2. Manuals
  3. NEC PowerMate ES Series Configuration Manual

NEC PowerMate ES Series Configuration Manual

Made by: NEC
Type: Configuration Guide
Category: Motherboard
Pages: 1
Size: 0.18 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

BIOS

Factory setting. Sets the system for 

Recovery

normal operation. The BIOS uses current 
configuration information and passwords 
at power on.

To enable BIOS recovery for a corrupted 
system, remove the jumper. Wait 10 seconds.
Replace the jumper on pins 1 and 2.

Restores Safe BIOS settings as the 
default BIOS settings and loads the 
BIOS Setup at power on.

CMOS

Factory setting. Maintains system board 

Clear

configuration in CMOS RAM with onboard
battery.

Clears CMOS while system power is off.  
Return jumper to pins 2 and 3 before 
powering system on.

Caution: To prevent damage to the system board,

avoid clearing CMOS while power is on.

1
2

3

JP19

1
2

3

JP15

1
2

3

JP19

1
2

3

JP15

Memory Upgrade

Maximum memory supported: 512 MB; 
minimum memory required: 32 MB.

Memory type and size can vary between sockets.

System supports 168-pin, 100-MHz non-ECC SDRAM modules 
in 32-MB, 64-MB, 128-MB, and 256-MB configurations.
Use NEC memory upgrade kits for the best compatibility with your
system. For memory compatibility information, call Technical Support.

Single- or double-sided DIMMS are supported.

No jumper setting required.

409-00072-000

PowerMate

®

ES Series System Board Configuration

Note: See your PowerMate ES Series User’s Guide
for detailed option installation information.

Website: www.nec-computers.com
Technical Support: 800-632-4525

JP2

Jumper

JP1

Jumper

System 
Memory
Upgrade
Sockets

Processor Socket 370

Jumper Settings

Processor Upgrade

See your user’s guide for detailed processor upgrade information.

Save to

Factory setting. 

RAM

Enables Suspend 
mode Save to RAM 
(STR) function.

JP3

Disables Save 
to RAM function.

JP3

Keyboard

Factory setting. 

at 

Disables keyboard at power on. 

Power On

Enables keyboard 
at power on.

1 2 3

JP1

1 2 3

JP1

USB

Factory setting. 

Keyboard

Disables system

Wakeup

wakeup by USB 
keyboard.

3
2

1

JP2

Enables system
wakeup by USB 
keyboard.

3
2

1

JP2

USB Port

Factory setting. 

Selection

Enables front 
USB port and 
rear USB port.

Disables front 
USB port and
enables rear
USB port. 

3 2 1

6 5 4

JP13

3 2 1

6 5 4

JP13

JP15

Jumper

JP19

Jumper

JP13

Jumper

Secondary
IDE Connector

Primary
IDE Connector

JP3

Jumper

PCI Slots

409-00072-000  6/7/00 11:30 AM  Page 1