PDF User Manual

  1. Home
  2. Manuals
  3. Mitsubishi Electric MSZ-FH Series User Manual

Mitsubishi Electric MSZ-FH Series User Manual

Made by: Mitsubishi Electric
Type: User Guide
Category: Remote Control
Pages: 1
Size: 0.63 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

Simple Remote Controller User Guide

MSZ-FH series

1

2

3

Press 

 to start the operation.

Press 

 or 

 to set the temperature.

Each press raises or lowers the temperature by 1°C.

Press 

 to select operation mode. Each press 

changes mode in the following order:

)

N

A

F

(

 

)

T

A

E

H

(

 

)

Y

R

D

(

 

)

L

O

O

C

(

 

)

O

T

U

A

SELECTING OPERATION MODES

PREPARATION BEFORE OPERATION (SETTING CURRENT TIME)

Note:

In the case of systems with multiple units (multi-systems), it is not 
possible to set different operation modes for each unit. In addition, 
in some cases, it may not be possible to use certain functions.

Press these buttons to toggle these functions on/off.

The remote controller has a simple, 
stylish design with emphasis on 
the use of straight lines. The unit 
c a n   b e   t u r n e d   o n / o f f   a n d   t h e  
temperature adjusted  with  the 
cover closed.

3

Press the DAY 
button to set the 
day. 

4

 Press CLOCK 
again.

2

Press the TIME 
button to set the 
time. 

1

Press CLOCK
button.

Setting preferences can be saved and then activated in 
future uses simply by pressing the pressing the i-save button.

In normal heating mode, the lowest possible temperature setting is 
16°C, but using i-save, this value can be set as low as 10°C.

i-save

Air conditioner operates at maximum capacity for 15 minutes.

POWERFUL

A swing pattern is used for airflow to create an enhanced 
cooling sensation. This allows the temperature to be set 2°C 
higher without any loss of comfort.

ECONO COOL

A

B

  (AUTO)    (Silent)    (Low)    (Med.)    (High)  (Super High)

Press 

 to select air

fl ow direction.

Each press changes air

fl ow direction in the following order:

  (AUTO)    (1)      (2)      (3)      (4)      (5)    (SWING)

Press 

 to select horizontal air

fl ow direction. 

  (SWING)

Heating (or Cooling) of two locations using 

the double vane

C

FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT

FAN

WIDE VANE

L-VANE-R

Each press changes air

fl ow direction

in the following order:

Press 

 to select fan speed. 

Each press changes fan speed

in the following order: 

TIMER OPERATION

Press 

 or 

 during operation to set the timer. 

 (ON timer) :    The unit turns ON at the set time.
 (OFF timer) :  The unit turns OFF at the set time.

 or 

 blinks.

*  Make sure that the current time and day are set correctly. 

 

1

Press 

 (Increase) and 

 (Decrease) to set the 

time of timer. 

Each press increases or decreases the set time by 10 minutes.
•  Set the timer while 

 or 

 is blinking.

2

1

Press 

 to enter the weekly timer setting mode.

2

Press 

 

 

and

 

 

to select setting day and number

.

3

Press 

 , 

 , and 

 to set ON/OFF, time, and temperature. 

4

Press 

 to complete and transmit the weekly timer setting. 

5

Press 

 to turn the weekly timer ON. (

 

 

lights.)

*  When the weekly timer is ON, the day of the week whose timer setting is complete, will light. 

Press 

 again to turn the weekly timer OFF. ( 

goes out.)

 

0

:30

7

:30

8

:30

8

:00

23

:30

Wake up

Go to bed

Timer OFF.

Timer ON.

Temp. setting: 27°C

Change temp.

Temp. setting: 28°C

Press 

 or 

 again to cancel timer.

3

F

ON/OFF TIMER

WEEKLY TIMER

A

B

E

C

D

F

G

What is “NATURAL FLOW”?

Press this button to toggle the function on/off.

Press this button to toggle the function on/off.

What is “Air Purifying”?

D

E

i-see OPERATION

3

Press 

i-see control mode.

 again to release

1

Press 

 during COOL, DRY,

HEAT and AUTO mode to
activate i-see control mode.

•  Press gently using a thin instrument.

• 

 lights. (Operation display section)

•  The default setting is “active”.

i-see control mode

ABSENCE DETECTION

SENSOR

To avoid overcooling

Air

Virus

Bacteria

Dust

Air

Neutralization/Sterilization

Plasma

space

2

Press 

ABSENCE DETECTION.

 again to activate

• 

 lights. (Operation display section)

INDIRECT/DIRECT

Press 

to activate INDIRECT/DIRECT

i-see control mode is effective.

mode. This mode is only available when the

(INDIRECT) 

(DIRECT) 

(OFF)

G

CONVENIENT ONE-TOUCH FUNCTIONS

As time passes, air

fl ow will become more 

like natural wind. The continuously gentle 
breeze provides enhanced comfort for 
occupants.

The purifier neutralizes bacteria as it 
passes through the plasma device.

The sensor detects
the floor temperature….

When no-one is in the room,
the unit automatically switches to 
energy-saving mode.

Enhance comfort by averting airflow away from 
people, or set direct airflow to target people for quick 
cooling/heating. 

The unit monitors people……

To warm from the

foot-level up

10 minutes after

person leaves room

Allowing

indirect airflow

60 minutes after

person leaves room

5   校

【海外】カンタンリモコン操作マニュアル 297mm×420mm

2012.8.8