PDF User Manual

  1. Home
  2. Manuals
  3. MacAllister MAC1700RMA Safety And Operating Manual

MacAllister MAC1700RMA Safety And Operating Manual

Made by: MacAllister
Type: Safety And Operating Manual
Category: Lawn Mower
Pages: 9
Size: 0.63 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

20d

MacAllister Power Tools,

1 Hampshire Corporate Park, Chandlers Ford, 

Eastleigh, Hants S053 3YX, U.K.

Technical Helpline 0845 300 2577

SAFETY AND OPERATING MANUAL

Caution: 

Carefully read this entire Instruction Manual before using this product

MAC1700RMA

I700W

ROTARY COLLECT MOWER

Thank you for purchasing a MacAllister product. We are confident that this product will meet and exceed your 
expectations of quality and reliability. Please take the time to carefully read this entire instruction manual 
before using your new product, and take note of the basic safety precautions contained herein.

MacAllister Power Tools,

1 Hampshire Corporate Park, Chandlers Ford, 

Eastleigh, Hants S053 3YX, U.K.

Technical Helpline 0845 300 2577

PMS Black U

PMS Warm Red U

Code:

 MAC1700RMA(B&Q)

Date:

 051228

Edition:

 9

Op:

 DTR

20c

18

19

20a

20b

24

24

21

22

23a

23b

25

Connect 
Blue to N 
(neutral)

Outer sleeve
firmly clamped

Cable grip

Brown L 
(live)

13 amp fuse 
approved to BS1362

 


background image

A

C

B

7c

7b

7a

6a

4a

3b

9

8

6b

3a

2

1

10

4b

5

11

12

13

15

14

16a

16b

17a

17b

1

3

4

6

10

14

13

7

8

9

5

12

11

15

16

17

18

19

20

21

22

23

25 24

2

3

4

27

26

 


background image

1

Contents

I -   Parts list 

A/1

II -   Technical data 

1

III -   Safety instructions 

2

IV -   Getting started 

5

V -   Operation 

6

VI -  Maintenance and repair 

7

VII -  Guarantee 

9

VIII -  EC Declaration of conformity  

10

I - Parts list

1.  Upper handle
2.  Power button
3.  Power on indicator
4.  Motor on/off grip (x 2)
5.  Power cable 
6.  Motor cable 
7.   Handle joint (x 2)
8.  Handle twist lock (x 2)
9.  Wing knob (x 2)
10. Power cable tidy
11.  Blade spanner
12. Motor cable saddle clip (x 2)
13. Hinged cover
14. Cover latch
15. Mower body
16. Height adjustment lever
17.  Lower handle
18. Lower handle fixing clip (x 2)
19. Grass box
20. Wheel (x 4)
21. Front handle
22. Blade
23. Blade bolt
24. Blade height spacer (blue)
25. Blade height spacer (yellow)
26. Filter cover
27. Filter

II -  Technical data

Voltage:.....................................230–240V ~ 50 Hz
Motor power:............................................... 1700W
No-load speed: .....................................4500min

-1

Cutting width (swathe):........................36cm (14”)
Cutting heights: 
  With blue spacer in place................................... 
 

5 (16mm, 25mm, 35mm, 45mm and 60mm)

  With blue spacer removed................................. 
 

5 (22mm, 31mm, 41mm, 51mm and 66mm)    

Grass box capacity: ..................................34 litres
Approximate weight:.....................................16 kg

NOISE AND VIBRATION DATA

A weighted sound pressure level:..........83 dB(A)
A weighted sound power level: ...........95.8 dB(A)
Declared guaranteed sound power level: 
............................................................. 96 dB(A)
Typical weighted vibration:.....................4.76m/s

2

The sound intensity level for the operator 
may exceed 85dB(A) and sound protection 
measures are necessary

 


background image

2

 

3

GENERAL SAFETY INSTRUCTIONS

WARNING. 

Read all instructions. Failure to follow all 

instructions listed below may result in electric shock, 

fire and/or serious personal injury. The term “power 

tool” in all of the warnings listed below refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

SAVE THESE INSTRUCTIONS

1)   WORK AREA

  a)    Keep work area clean and well lit. 

Cluttered and 

dark areas invite accidents.

 

b)    Do not operate power tools in explosive 

atmospheres, such as in the presence of 

flammable liquids, gases, or dust.

 Power tools 

create sparks which may ignite the dust or fumes. 

 

c)    Keep children and bystanders away while 

operating a power tool.

 Distractions can cause 

you to lose control.

2) ELECTRICAL SAFETY

 

a)    Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools.

 Unmodified plugs and matching outlets will 

reduce risk of electric shock.

  b)    Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges 

and refrigerators.

 There is an increased risk of 

electric shock if your body is earthed or grounded.

 

c)    Do not expose power tools to rain or wet 

conditions.

 Water entering a power tool will 

increase the risk of electric shock.

  d)    Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges 

or moving parts.

 Damaged or entangled cords 

increase the risk of electric shock.

 

e)    When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of 

a cord suitable for outdoor use reduces the risk of 

electric shock.

3)  PERSONAL SAFETY

   

a)    Stay alert, watch what you are doing and 

use common sense when operating a power 

tool. Do not use a power tool while you are 

tired or under the influence of drugs, alcohol, 

or medication.

 A moment of inattention while 

operating power tools may result in serious 

personal injury.

 

b)    Use safety equipment.

 

Always wear eye 

protection. 

Safety equipment such as a dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will 

reduce personal injuries.

 

c)    Avoid accidental starting. Ensure the switch is 

in the off-position before plugging in.

 Carrying 

power tools with your finger on the switch or 

plugging in power tools that have the switch on 

invites accidents.

 

d)    Remove any adjusting key or wrench before 

turning the tool on.

 A wrench or a key that is left 

attached to a rotating part of the power tool may 

result in personal injury.

 

e)    Do not overreach. Keep proper footing and 

balance at all times.

 This enables better control 

of the power tool in unexpected situations.

 

f)    Dress properly. Do not wear loose clothing 

or jewellery. Keep your hair, clothing, and 

gloves away from moving parts.

 Loose clothes, 

jewellery or long hair can be caught in moving 

parts.

 

g)    If devices are provided for the connection of 

dust extraction and collection facilities, ensure 

that these are connected and properly used.

 

Use of these devices can reduce dust-related 

hazards.

4)  POWER TOOL USE AND CARE

 

a)    Do not force the power tool. Use the correct 

power tool for your application.

 The correct 

power tool will do the job better and safer at the 

rate for which it was designed.

 

b)    Do not use the power tool if the switch does 

not turn it on and off.

 Any power tool that cannot 

be controlled with the switch is dangerous and 

must be repaired.

 

c)    Disconnect the plug from the power source 

before making any adjustments, changing 

accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of 

starting the power tool accidentally.

 

d)    Store idle power tools out of the reach of 

children and do not allow persons unfamiliar 

with the power tool or these instructions 

to operate the power tool.

 Power tools are 

dangerous in the hands of untrained users.

 

e)    Maintain power tools. Check for misalignment 

or binding of moving parts, breakage of parts, 

and any other condition that may affect the 

power tools operation. If damaged, have the 

power tool repaired before use.

 Many accidents 

are caused by poorly maintained power tools.

 

f)    Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control.

 

g)    Use the power tool, accessories and tool bits 

etc., in accordance with these instructions and 

in the manner intended for the particular type 

of power tool, taking into account the working 

conditions and the work to be performed. 

Use 

of the power tool for operations different form 

intended could result in a hazardous situation.

5) SERVICE

 

a)    Have your power tool serviced by a qualified 

repair personnel using only identical 

replacement parts. 

This will ensure that the 

safety of the power tool is maintained. 

ADDITIONAL SAFETY RULES FOR ROTARY 

MOWERS

•   Only use this Lawn Mower when a Residual Current 

Device (RCD) with a tripping current of not more than 

30mA is in the circuit.

•   If an extension cord is used make sure it is for outdoor 

use and marked as such. The recommended size 

of extension cord is not lighter than 1.5mm

2

 and a 

maximum of 10 metres in length.

•   Completely uncoil your extension cable before use 

to prevent overheating and loss of mower efficiency. 

When tidying away the cable, wind it carefully to avoid 

kinking. 

WARNING

. After switching off the machine, the cutting 

blade continues to rotate for a few more seconds.

•   Frequently inspect the condition of the cutting blades. 

Damaged blades must be replaced immediately. Blunt 

blades should be sharpened. Follow all the required 

precautions when replacing the blades.

•   Before use check the supply and extension cord 

for signs of damage or ageing. If the cord becomes 

damaged during use, disconnect the cord from the 

supply immediately. DO NOT TOUCH THE CORD 

BEFORE DISCONNECTING THE SUPPLY.

•   Do not use the appliance if the cord is damaged or 

worn.

•   Read the instructions carefully. Be familiar with the 

controls and proper use of the equipment.

•   Keep extension cord away from cutting blades.

•   Wear eye and ear protection. Wear dust protection 

if the mowing action causes the raising of dust or 

particles.

•   Never allow children, infirm people or people 

unfamiliar with these instructions to use the rotary 

collect mower.

•   Avoid using the mower, while people, especially 

children and the infirm, or pets are nearby.

•   Use the mower only in daylight or good artificial light.

•    Do not operate the mower unless the grass box is in 

place.

•   Never operate the mower with a damaged base.

•   Never operate the appliance with defective guards 

or shields, or without safety devices, for example 

deflectors and/or grass catcher, in place. 

•   When starting up and when the machine is in 

operation, keep the cutting section away from all parts 

of the body, especially the hands and feet.

•   Do not start the machine when it is not in the operating 

position.

•   Thoroughly inspect the mower for loose or damaged 

parts before each use. Do not use the unit until 

adjustments or repairs are made.

•   Use only the manufacturer’s recommended 

replacement parts and accessories.

•   Always disconnect the mower from the mains when 

leaving it unattended.

•   Switch the motor off and pull out the plug when the 

machine is not being used, being cleaned, being 

moved from one place to another or when the blades 

are being changed or adjusted.

•   If there is an interruption to the power supply or the 

extension cable is damaged, switch off the machine 

immediately and remove the plug from the power 

point.

•   Inspect and maintain the mower regularly. Have the 

mower repaired only by an authorised repairer.

•   If power cord is damaged, only have it repaired or 

replaced by an authorised service centre.

•   Check that all grass cuttings and dirt have been 

removed from the ventilation vents.

•   When not in use, store the mower out of the reach of 

children and infirm people. 

WARNING

.  In order to reduce the risk, disconnect the 

plug from the supply power, only use recommended 

accessories as required, otherwise personal injury may 

result.

•   Do not use the machine to cut grass which is not on 

the ground. For example, do not cut grass which is on 

rocks.

•   Do not switch on the machine in enclosed or poorly 

ventilated spaces or in the presence of inflammable 

and/or explosive substances such as liquids, gasses 

and powders.

•   Always stop the mower and switch off at the mains 

when cutting is delayed, emptying the grass box or 

when walking from one cutting location to another.

•   Do not cross roads or gravel paths with the machine 

still running.

•   Do not move the machine by pulling on the electrical 

cable. Always use the handgrip.

•   Keep a balanced and stable stance while using the 

machine.

•   Ensure that the area being cut is free from strings, 

stones and debris. Remove any objects that could be 

thrown during cutting or could wind around the cutting 

mechanism.

•   If you hit or become entangled with a foreign object, 

stop the motor and disconnect from the mains 

immediately to check for damage. Repair any damage 

before further operation is attempted. Do not operate 

the mower with loose or damaged parts.

•   Do not cut against hard objects. This could cause 

injury to the operator and damage to the machine.

•   Keep your hands, face and feet away from all moving 

parts.

•   If possible, avoid cutting wet grass.

•   Exercise proper caution when mowing on sloping 

ground. Watch your footing and wear non-slip 

footwear. Mow along the slope not up and down it. Do 

not mow on steep slopes. Be especially cautious when 

changing direction on slopes – stand above the mower 

to avoid risk of injury.

•   Never operate the mower barefoot or when wearing 

open sandals or canvas shoes.

•   Do not mow by pulling the machine towards you.

•   When mowing, keep the cable away from the mower. 

Your direction of work should be away from the power 

point. Mow in straight lines, not in circles.

•   Always keep hands and feet away from rotating parts.

•   When the machine is not in use, store it in a dry, and 

high or locked-up place, out of reach of children.

•   Check the grass catcher frequently for wear or 

deterioration.

•   After use, disconnect the machine from the power 

supply and check for damage. If you have the slightest 

doubts, check with an authorised service centre.

•   Only use the machine according to the instructions 

given in this manual.

III - Safety instructions

 


background image

4

5

IV - Getting started

1

UNPACKING

Due to modern mass production techniques, it 
is unlikely that your power tool is faulty or that 
a part is missing. If you find anything wrong, do 
not operate the tool until the parts have been 
replaced or the fault has been rectified. Failure 
to do so could result in serious personal injury.
The mower is supplied partially disassembled. 
The parts in the carton are:
• Mower body (with blade fitted)
•  Upper handle (including switchbox, motor on/

off grips, handle joints with twist locks, motor 
cable saddle clip and 15m power cable) 

•  Lower handle (including cable tidy, motor 

cable saddle clip and blade spanner)

• Grass box
• 2 wing knobs and 2 lower handle fixing clips

ASSEMBLY
CAUTION.

 Never carry out any assembly 

operations or adjustments with the power 
connected to the mower. Always ensure that the 
power button is in the off position and that the 
power plug is disconnected from the supply.

2

Ensure that the handle is in the correct 
orientation i.e. the cable tidy (10) must be on 
the uppermost side of the lower handle (17) 
as shown on the main photograph. Fit the two 
tubes of the lower handle (17) into the slots in 
the mower body (15).

3

Fix the ends of the lower handle in position with 
the two lower handle fixing clips (18).

4

Using the two saddle clips (12), secure the 
black-coloured motor cable (6) to the upper 
handle (1) and lower handle (17).

5

Fit the handle joints (7) of the upper handle (1) 
over the die-cast ends of the lower handle (17) 
and secure them together with the wing knobs 
(9).

NOTE. 

There are two spacers under the blade, 

one coloured blue (24) and one coloured yellow 
(25).
The blue spacer can be removed to increase the 
incremental cutting heights by an extra 6mm 
at all 5 settings of the height adjustment lever 
(16).The mower must not be operated without 
the yellow spacer (25) in position under the 
blade. Instructions on how to remove the blue 
spacer are given in the section on changing the 
mower blade (Section VI).

CAUTION.

 Keep the two arms of the upper 

handle (1) parallel and insert them into the 
handle joints, both at the same time. If you 
insert one arm and then the other, you may 
damage the joints. When removing the handle, 
keep the arms parallel and remove both arms at 
the same time.

6

Ensure that each arm of the upper handle (1) 
is properly seated in the handle joints (7) as 
follows:
• Loosen the two handle twist locks (8).
•  Keeping the two arms of the upper handle 

parallel, make sure that the upper handle (1) is 
fully inserted into the handle joints (7).

•  Retighten the two handle twist locks (8) 

turning them clockwise. 

NOTE.

 Make sure that the switchbox is facing 

upwards and that the orange-coloured power 
cable (5) is not wrapped around the handle. 
It must trail freely behind the switchbox on the 
upper handle.

7

ADJUSTING THE CUTTING HEIGHT
CAUTION.

 Never carry out any assembly 

operations or adjustments with the power 
connected to the mower. Always ensure that 
the power button is in the off position and 
that the power plug is disconnected from the 
supply. Choose a level area with a firm surface, 
press the cover latch (14), lift the cover (13) and 
remove the grass box (19).

8

Pull the height adjustment lever (16) towards you 
then move it to the right to increase the cutting 
height or to the left to decrease the cutting 
height. 

•   Check regularly that the nuts, bolts, screws and other 

fittings are tight and secure.

•   Keep the mower free of grass, leaves and other 

debris build-up.

•   Do not tilt the appliance when switching on the motor, 

except if the appliance has to be tilted for starting. 

In this case, do not tilt it more than is absolutely 

necessary and lift only the part which is away form 

the operator. Always ensure that both hands are in the 

operating position before returning the appliance to 

the ground.

•   Do not try to repair the machine or access internal 

parts. Use authorised service centres only.

•   Do not get distracted and always concentrate on what 

you are doing. Use common sense. Never operate 

the machine when you are tired, sick or under the 

influence of alcohol or other drugs.

•   Disconnect the unit from the power supply when not in 

use, before servicing and when changing the blades.

•   Keep these instructions. Refer to them frequently and 

use them to instruct other users. If you loan someone 

this unit, also loan them these instructions.

•   The operator or user is responsible for accidents or 

hazards occurring to other people or their property.

Failure to follow operating instructions and safety 

precautions in this instruction manual can result in 

serious injury. Read the manual before starting or 

operating this unit.

Wear eye protection

Wear hearing protection

Wear respiratory protection

 

The rating plate on your tool may show symbols. These 

represent important information about the product or 

instructions on its use.

Wear hearing protection.

Wear eye protection.

Wear respiratory protection.

Double insulated for 

additional protection.

Conforms to relevant 

safety standards.

Waste electrical products should not be 

disposed of with household waste. Please 

recycle where facilities exist. Check with your 

Local Authority or retailer for recycling advice.

Read the instruction manual.

Warning.

Do not run the mower over objects. They can 
be thrown and cause severe injury.

Keep bystanders, especially children and pets 
at a distance of greater than 5m.

Switch off and remove the plug before 
adjusting, cleaning or if the cord is damaged. 

Avoid injury, do not place hands or feet near 
the rotating blade.

Blade continues to rotate after the mower 
is switched off. Wait until all parts are 
stationary before touching them.

Do not use in the rain or leave the mower 
outdoors whilst it is raining.

Symbols

 


background image

6

7

Release the lever to lock it in one of the five 
stop positions.

NOTE.

 There is a blue spacer (24) located 

under the blade. It can be removed to increase 
the incremental cutting heights
by an extra 6mm at all 5 settings of the height 
adjustment lever (16).
Instructions on how to remove this spacer are 
given in Step 19.

HEIGHT ADJUSTMENT WITH BLUE 
SPACER IN POSITION
 

Lever position 

Cutting height

 

16mm

 

25mm

 

35mm

 

45mm

 

60mm

HEIGHT ADJUSTMENT WITH BLUE 
SPACER REMOVED
 

Lever position 

Cutting height

 

1  

22mm

 

2  

31mm

 

3  

41mm

 

4  

51mm

 

5  

66mm

Replace the grass box (19).

9

BEFORE STARTING

ATTENTION.

 Due to the power input of this 

product on start up, voltage drops may occur 
and this can influence other equipment 
(e.g. dimming lights). So for technical reasons 
we advise, if the mains-impedance is 
Zmax<0.444 Ohm, these disturbances are not 
expected. If you require further clarification, you 
may contact your local power supply authority.
Before use, check that the mower is in good 
working order.
Ensure the power button is in the off position 
and disconnect the cable plug from the mains 
supply.
Examine the general condition of the mower. 
Inspect the body underneath the cover, blade, 
switch, power cord and extension cord (if used). 
Check for loose screws, misalignment, binding 
of moving parts, improper mounting, broken 
parts and any other condition that may affect 
its safe operation. If abnormal noise or vibration 
occurs during operation, turn the mower off 

immediately and have the problem corrected. 
Do not use a damaged tool and attach a label 
“DO NOT USE” to the tool.
Ensure that you are on a flat surface and have 
secure footing.Check that the upper handle (1) 
is in line with the lower handle (17) and that the 
wing knobs (9) are securely tightened.

WARNING.

 Do not operate the mower unless 

the grass box is in place.

V - Operation

10

SWITCHING ON AND OFF
IMPORTANT.

 Practise switching on and 

switching off the mower as detailed below 
before using it to cut grass for the first time. 
Start the mower on a hard, level surface 
(such as a driveway) that is free of debris.
Connect the power cable (5) to the power point.

NOTE. 

The power on indicator (3) lights 

showing that power is connected.

11

Squeeze one of the motor on/off grips (4) 
towards the upper handle (1) and use the other 
hand to press the power button (2). The power 
button remains depressed as long as the 
pressure is maintained on the motor on/off grip 
(4).

12

Transfer the other hand to squeeze the second 
motor on/off grip (4).
As the motor picks up speed you are ready to 
begin mowing.
To stop the motor, release pressure on both 
motor on/off grips (4) until the power button (2) 
clicks off. 
The motor is not started if pressure is re-
applied to the motor on/off grips (4) alone. It is 
necessary to squeeze a motor on/off grip (4) 
and re-press the power button (2) to re-start 
the motor.

13

EMERGENCY STOP

•  To stop the motor in an emergency, simply 

release the pressure on both motor on/off 
grips.

•  Keep your hands on the upper handle in order 

to control the mower.

•  Allow the motor to stop completely before 

releasing control of the handle.

14

MOWING
WARNING.

 Only use this mower when a 

Residual Current Device (RCD) with a tripping 
current of not more than 30mA is in the circuit.

NOTES:

• Cut grass when it is dry.
• Keep the mower blade sharp and balanced.
•  Do not set the cutting height too low, 

especially at the beginning of the mowing 
season.

• Vary the cutting pattern with each mowing.
•  Use the cable restraint to secure the power 

cable (5) in order to prevent any pulling forces 
on the cable from being transmitted to the 
switch box.

•  Make sure that the work area is free of rocks, 

debris, string or cord and other foreign 
objects.

•  Where possible, start the mower before 

approaching the grass to be cut.

•  Cut the grass by moving in a straight line and 

proceed slowly.

•  Start cutting nearest the mains power source 

and work away from it to make it easier to 
avoid the cable.

•  At the edge of the lawn, take care to maintain 

the mower parallel with the ground to prevent 
“scalping” of the grass.

• Do not cut damp or wet grass. 
• Do not overload the mower.
After finishing the cutting operation, release 
pressure on both motor on/off grips (4) 
and allow the motor to come to a complete 
standstill. 

15

Remove the cable plug from the mains supply.

16

EMPTYING THE GRASS BOX

As the grass collection box (19) fills with grass, it 
is clearly visible through the translucent material 
of the box.
Ensure the power button (2) is in the off position 

and disconnect the power cable plug from the 
power point.
Ensure that you are on a flat surface and have 
secure footing.
Press the cover latch (14) and lift the hinged 
cover (13).
Lift out the grass box (19), empty it, replace it 
and close the hinged cover (13).

VI -  Maintenance

and repair

17

CHANGING THE MOWER BLADE
CAUTION.

 Never carry out any assembly 

operations or adjustments with the power 
connected to the mower. Always ensure that the 
power button is in the off position and that the 
power plug is disconnected from the supply.
Periodically check the blade (22) for nicks and 
dull cutting edges and have it sharpened if 
needed.

NOTE.

 The blade should be sharpened and 

balanced by an authorised repair centre.If there 
are rounded or broken ends, thinned metal or 
other damage, replace the blade.
With the power button (2) in the off position and 
the power plug removed from the supply, take 
out the grass box (19) and turn the mower on 
its side.

18

Put on a pair of sturdy gloves to protect your 
hands. Block the rotation of the blade (22) and 
use the blade spanner (11) to unscrew the blade 
bolt (23) in an anti-clockwise direction (viewed 
from underneath).

19

Remove the blade bolt (23) and blade (22) 
taking care not to disturb any blade height 
spacers (24 and 25) that might be fitted.

NOTE. 

The blue spacer (24) can be removed 

to increase the incremental cutting heights 
by an extra 6mm at all 5 settings of the height 
adjustment lever (16).
The mower must not be operated without the 
yellow spacer (25) in position under the blade.

20

Check that the blade height spacers (24 and 25) 

 


background image

8

9

are properly located, add the replacement blade 
(22) and screw in the blade bolt (23), tightening 
it with the blade spanner (11).
Return the blade spanner (11) to its storage 
position in the cable tidy (10).
Press down on the blade spanner (11) to lock it 
in position under the retaining latch.
Return the mower to the upright position and 
replace the grass box (19).
Reconnect the power cable to the supply and 
run the mower for a few minutes to check that 
the blade is properly fitted and that there is no 
undue noise or vibration. 
Use only the blade as recommended by the 
manufacturer.

21

CLEANING THE FILTER

To help maintain good airflow within the grass 
box and thus ensure optimum filling, regularly 
check and, if necessary, clean the filter (27).
Access the filter by using a flat blade screwdriver 
to prise off the filter cover (26).

22

Take out the filter, wash it in warm, soapy water, 
rinse it and allow it to dry.

23

Clean out the filter area and replace the filter 
and the filter cover (26).

NOTE.

 This filter is a consumable item and not 

a warranty item.

24

MAINTENANCE

Store the tool, instruction manual and 
accessories in a secure, dry place. You will 
then always be able to refer to the relevant 
information when required.
In order to take up less space when storing the 
mower, loosen both wing knobs (9) and fold the 
upper handle (1) over the lower handle (17).
When not in use, keep the cord wrapped 
around the cable tidy.
Keep the tool’s air vents accessible when the 
cover (13) is raised, unclogged and clean at all 
times.
Remove dust and dirt regularly. 
Clean inside the mower body and under the 
deck. Use a brush or damp rag.

At the end of the season, give the mower 
an overall cleaning and a thorough check, 
including the blade. Have the blade sharpened 
or replaced if necessary.
You can clean out the grass box with a hose or 
pressure cleaner provided that you first remove 
it from the mower. Replace the grass box when 
it is dry.
Do not let water come into contact with the 
motor.
Never use chemicals such as petrol or solvents 
to clean plastic parts.
Never disassemble the tool or carry out any 
repairs.
Always have the mower maintained or repaired 
by a competent person at an authorised service 
centre.

25

GENERAL INSPECTION

Regularly check that all fixing screws are tight. 
They may vibrate loose over time.

26

PLUG REPLACEMENT

If you need to replace the fitted plug then follow 
the instructions below.

IMPORTANT.

 The wires in the mains lead are 

coloured in accordance with the following code:
Blue – Neutral  Brown – Live
As the colours of the wires in the mains lead 
of this appliance may not correspond with the 
coloured markings identifying the terminals in 
your plug, proceed as follows. The blue wire 
must be connected to the terminal which is 
marked with N or coloured black. The brown 
wire must be connected to the terminal which is 
marked with an L or coloured red.

WARNING. 

Never connect live or neutral wires 

to the earth terminal of the plug.
Only fit an approved 13 Amp BS1363/A plug 
and the correct rated fuse.

NOTE.

 If a moulded plug is fitted and has to 

be removed take great care in disposing of the 
plug and severed cable, it must be destroyed to 
prevent engaging into a socket.

VII - Guarantee

Thank you for investing in MacAllister. 
These products have been made to demanding, 
high quality standards and are guaranteed for 
domestic use against manufacturing faults for a 
period of 36 months from the date of purchase.
To take advantage of this free extended 
warranty please register on the website. This 
guarantee does not affect your statutory rights. 
If your product fails due to a defect in material or 
workmanship during this period, please return it 
to your nearest B&Q store.
Normal wear and tear, including accessory 
wear, is not covered under guarantee. The 
product is guaranteed for 12 months if used for 
normal trade purposes. Any guarantee is invalid 
if the product has been overloaded or subject 
to neglect, improper use or an attempted 
repair other than by an authorised agent. 
Heavy duty, daily professional or hire usage 
are not guaranteed. Due to continuous product 
improvement, we reserve the right to change 
the product specification without prior notice.

 


background image

10

11

VIII - EC Declaration of conformity

DECLARATION OF CONFORMITY

1 Hampshire Corporate Park

Chandlers Ford, Hampshire, SO53 3YX, U.K.

We declare that the 

ROTARY COLLECT MOWER MAC1700RMA 

conforms with the following 

EEC Directives their supporting Statutory Instruments and relevant standards, where applicable 
as follows:
The Machinery Directive 98/37/EC
The Low Voltage Directive 73/23/EEC amended by 93/68/EEC
The EMC Directive 89/336 amended by 93/68/EEC
The Outdoor Noise Directive 2000/14/EC

EN 60335-1:1994+A1+A2+A11+A16
EN 60335-2-77: 2000
EN 50366: 2003

EN55014-1: 2000+A1 + A12
EN55014-2: 1997+A1
EN61000-3-2: 2000
EN61000-3-11:2000

The noise emission in the environment by equipment for use outdoors (ANNEX VI- Internal 
control of production with assessment of technical documentation and periodical checking) 
2000/14/EC.

Measured sound power level: 95.8 dB(A)                Guaranteed sound power level: 96 dB(A)

26th August 2005

Mr Kevin McGilvray

Director of Quality Assurance

B&Q plc

 


background image

12