PDF User Manual

  1. Home
  2. Manuals
  3. Jensen MCD5090 Installation And Operation Manual

Jensen MCD5090 Installation And Operation Manual

Made by: Jensen
Type: Installation And Operation Manual
Category: Marine Equipment
Pages: 10
Size: 0.75 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

MCD5090

DIGITAL AUDIO

COMP ACT

MODE

MUTE

BAND

BAND

A/PS

EQ/LD

LOC

6

5

4

3

2

1

INT

RPT

RDM

-10

+10

AUX IN

AUX IN

PUSH

SEL

marine

MCD5090

Installation and Operation Manual

MARINE CD PLAYER / RECEIVER

 


background image

MCD5090

2

SAFETY INFORMATION

When Boating

Keep the volume level Iow enough to be aware of your surroundings.

Protect from Water

Do not expose the product directly to water, as this can cause electrical shorts, fire or other 
damage.

Protect from High Temperatures

Exposure to direct sunlight for an extended period of time can produce very high temperatures 
inside your vessel. Give the interior a chance to cool down before starting playback. 
Do not mount radio within close proximity of engine compartment.

Use the Proper Power Supply

This product is designed to operate with a 12 volt DC negative ground battery system.

Protect the Disc Mechanism

Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or 
permanent damage due to the precise mechanism of this unit.

CAUTION:

THIS MOBILE CD PLAYER IS A CLASS I LASER PRODUCT. THIS UNIT USES A VISIBLE/
INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION IF EXPOSED 
DIRECTLY. BE SURE TO OPERATE THE MOBILE CD PLAYER AS INSTRUCTED. 
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR PROCEDURES OTHER 
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION 
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. PLEASE REFER 
SERVICING TO A QUALIFIED TECHNICIAN.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING 
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. 

DISC NOTES

Compatible Disc Types

NOTE: CD-R and CD-RW discs will not play unless the recording session is closed and 

the CD is finalized.

Disc Maintenance

A dirty or defective disc may cause sound dropouts while playing. Before playing, wipe 
the disc using a clean cloth, working from the center hole towards the outside edge. 
Never use benzene, thinners, cleaning fluids, anti-static liquids or any other solvent.

Be sure to use only round CDs for this unit and do not use any special shape CDs. Use of 
special shape CDs may cause the unit to malfunction.

Do not stick paper or tape on the disc. Do not use CDs with labels or stickers attached or 
that have sticky residue from removed stickers.

Do not expose discs to direct sunlight or heat sources such as hot air-ducts, or leave them 
in a vessel parked in direct sunlight where there can be a considerable rise in temperature 
inside the vessel.

NOTE: A disc may become scratched (although not enough to make it unusable) 

depending on how you handle it and other conditions in the usage environment. These 

scratches are not an indication of a problem with the player.

Table 1: General Disc Information

Disc Type

Logo

Diameter/

Playable Sides

Playback Time

Audio CD

12 cm single side

74 minutes

REWRITABLE

RECORDABLE

Insert label

Do not bend.

Never touch
the under side
of the disc.

Wipe clean from 
the center to the
edge.

side up.

 


background image

MCD5090

3

INSTALLATION

Before You Begin

1.

Disconnect Battery

Before you begin, always disconnect the battery negative terminal.

2.

Remove Transport Screws

 

Important Notes

Before final installation, test the wiring connections to make sure the unit is connected 
properly and the system works.

Use only the parts included with the unit to ensure proper installation. The use of 
unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or other 
modifications to your vessel.

Install the unit where it does not interfere with driving and cannot injure passengers if 
there is a sudden or emergency stop.

If the installation angle exceeds 30º from horizontal, the unit might not give optimum 
performance.

This unit is not waterproof and is intended for interior mounting applications only. 
Exterior mounting of the unit requires use of an ASA approved marine housing.

Avoid installing the unit where it will be subject to high temperatures from direct sunlight, 
hot air, or from a heater, or where it would be subject to excessive dust, dirt or vibration.

DIN Front Mount

1.

Slide the mounting sleeve off of the chas-
sis if it has not already been removed. If it 
is locked into position, use the removal 
keys (supplied) to disengage it. The 
removal keys are depicted in “Removing 
the Unit” on page 3.

2.

Check the dashboard opening size by 
sliding the mounting sleeve into it. If the 
opening is not large enough, carefully cut 
or file as necessary until the sleeve easily 
slides into the opening. Do not force the 
sleeve into the opening or cause it to bend 
or bow. Check that there will be sufficient space behind the dashboard for the radio 
chassis.

3.

Locate the series of bend tabs along the top, bottom and sides of the mounting sleeve. 
With the sleeve fully inserted into the dashboard opening, bend as many of the tabs 
outward as necessary to firmly secure the sleeve to the dashboard.

4.

Place the radio in front of the dashboard opening so the wiring can be brought through the 
mounting sleeve.

5.

Follow the wiring diagram carefully and make certain all connections are secure and 
insulated with crimp connectors or electrical tape to ensure proper operation. 

6.

After completing the wiring connections, turn the unit on to confirm operation (vessel 
ignition switch must be on). If the unit does not operate, recheck all wiring until the 
problem is corrected. Once proper operation is achieved, turn the ignition switch off and 
proceed with final mounting of the chassis.

7.

Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is 
fully seated and the spring clips lock it into place.

8.

Attach one end of the 
perforated support 
strap (supplied) to the 
screw stud on the rear 
of the chassis using the 
hex nut and spring 
washer provided. 
Fasten the other end of 
the perforated strap to a 
secure part of the 
dashboard either above 
or below the radio using 
the screw and plain 
washer provided. Bend 
the strap, as necessary, to position it. 

CAUTION: The rear of the radio must be supported with the strap to prevent damage to 
the dashboard from the weight of the radio or improper operation due to vibration.

9.

Test radio operation by referring to the operating instructions for the unit.

Removing the Unit

To remove the radio after installation:
1.

Insert fingers into the groove in the front of 
frame and pull out to remove the frame. 
(When re-attaching the frame, point the 
side with a groove downwards and re-
attach.)

2.

Insert the removal keys straight back until 
they click, and then pull the radio out. If 
removal keys are inserted at an angle, 
they will not lock properly to release the 
unit.

Trim Plate Installation

Push the trim plate against the chassis until it is 
fitted. 

Reconnect Battery

When wiring is complete, reconnect the battery 
negative terminal.

182

53

Dashboard

Bend Tabs

Screw Stud

Dashboard

Machine Screw (5 x 25mm)

Hex Nut (5mm)

Hex Nut (5mm)

Rubber Bushing

Screw Stud

Support Strap

Dashboard

Removal Key

 


background image

MCD5090

4

WIRING

+12V DC SWITCHED (ACC)
FRONT RIGHT SPEAKER (+)
FRONT RIGHT SPEAKER (-)
FRONT LEFT SPEAKER (+)
FRONT LEFT SPEAKER (-)
DIMMER
NO CONNECTION
AUTO ANTENNA OUTPUT
REAR RIGHT SPEAKER (-)
REAR RIGHT SPEAKER (+)
REAR LEFT SPEAKER (-)
REAR LEFT SPEAKER (+)
GROUND
+12V DC BATTERY

RED
GRAY
GRAY/BLACK
WHITE
WHITE/BLACK
ORANGE
EMPTY
BLUE
PURPLE/BLACK
PURPLE
GREEN/BLACK
GREEN
BLACK
YELLOW

PIN NO.

WIRE COLOR

FUNCTION

10 AMP FUSE

7

14

1

8

+12V

DC

Battery

+12V

DC

SWITCHED

GROUND

DIMMER

 


background image

MCD5090

5

BASIC OPERATION

Power On/Off ( )

Press the   button (1) to turn the unit on or off. 

Volume Control 

To increase the volume, turn the audio control knob (4) clockwise.
To decrease the volume, turn the audio control knob counter clockwise. When the volume is 
adjusted, the volume level is shown on the display panel as a number ranging from “0” (lowest) 
to “63” (highest).

Mute

Press the 

MUTE

 button (8) to mute the audio output. “

“ will appear on the LCD panel (7). 

Press 

MUTE

 again to restore the audio output to the previous level.

Mode

Press the 

MODE

 button (5) to select a different mode of operation, as indicated on the LCD  

panel (7). Available modes include Tuner, CD, and AUX IN. 

Equalizer (EQ)

The preset equalizer applies preset sound effects to the unit’s audio output signal. To adjust 
the preset equalizer, press the 

EQ/LD

 button (15). Press repeatedly to choose between the 

following modes: OFF, POP, ROCK, CLAS.

Loudness (LD)

When listening to music at low volume levels, this feature will boost the bass and treble ranges 
to compensate for the characteristics of human hearing. 

Press and hold

 the 

EQ/LD 

button (15) 

to activate this feature. “LOUD” appears on the display panel. 

Press and hold 

the 

EQ/LD

 

button again to turn the LOUD function off.

Auxiliary Input Operation

You can connect another audio/video system to the unit using the 

AUX IN

 input (20) on the 

front panel of the unit. Once the device is connected, press the 

MODE

 button (5) on the front 

panel to select “AUX” mode.

Audio Menu

Press the audio control 

(PUSH SEL) 

knob (4) to access the Audio Menu. You can navigate 

through the Audio Menu items by pressing the audio control knob repeatedly. Once the desired 
menu item appears on the display, adjust that option by turning the audio control knob within 
10 seconds. The unit will automatically exit the Audio Menu after six seconds of inactivity. The 
following menu items can be adjusted.

Bass Level (BA)

Use the audio control knob to adjust the Bass level range from “-7” to “+7”.

Treble Level (TR)

Use the audio control knob to adjust the Treble level range from “-7” to “+7”. 

Balance (BL)

Use the audio control knob to adjust the Balance between the right and left speakers from “R 9” 
(full right) to “L 9” (full left). “0” represents an equal balance between the right and left 
speakers.

Fader (FD)

Use the audio control knob to adjust the Fader between the front and rear speakers from “R 9” 
(full rear) to “F 9” (full front). “0” represents an equal balance between the front and rear 
speakers.

Clock Set

In clock display mode, press the audio control

 (PUSH SEL) 

knob (4)

 

for 2 seconds to 

enter clock adjustment mode. 

While the hour is flashing, turn the audio control knob (4) to adjust the value as follows:

USA Tuning Mode: 1-12

EURO Tuning Mode: 00 - 23 

Press the audio control

 (PUSH SEL) 

knob to confirm the hours. 

While the minutes are flashing, rotate the audio control knob to change the value (from 00 
to 59).

Press and hold

 the audio control

 (PUSH SEL) 

knob for 2 seconds to confirm the time and 

exit clock adjustment mode. 

Reset

Use a pencil or any non-metallic object to 

press and hold

 the reset button (17) for five seconds 

to reset the main unit. The unit will return to the factory default settings.

1

4

6

8

2

3

5

10

16

9

11

12

13

14

21

15

20

19

18

7

17

MCD5090

DIGITAL AUDIO

DIGITAL AUDIO

COMP ACT

ACT

MODE

MUTE

BAND

A/PS

EQ/LD

LOC

6

5

4

3

2

1

INT

RPT

RDM

-10

+10

AUX IN

AUX IN

PUSH

SEL

marine

 


background image

MCD5090

6

TUNER OPERATION

Select a Band

Press the 

BAND 

button

 

(21) on the control panel to change between three FM bands and two 

AM bands. Each band stores up to six preset stations.

Tuning

Manual Tuning

Press the up 

>>|

 (19) or down 

|<<

 button (18) for less than one second to change the radio 

frequency number up or down one step. 

Auto Seek Tuning

Press the up 

>>|

 (19) or down 

|<<

 button (18) for more than three seconds to move to the next 

station automatically.

Preset Stations

Six numbered preset buttons store and recall stations for each band.

Store a Station

Select a band (if needed), then select a station. 

Press and hold

 a preset button (9-14) for three 

seconds. The preset number will appear in the display.

Recall a Station

Select a band (if needed). Press a preset button (9-14) to select the corresponding stored 
station.

Automatically Store / Preset Scan

Automatically Store

Select a band (if needed). Press the 

A/PS

 button (16) for more than three seconds to 

automatically select six strong stations and store them in the current band. The new stations 
replace any stations already stored in that band.

Preset Scan

Select a band (if needed). Press the 

A/PS 

button

 

(16) to scan stations stored in the current 

band. The unit will pause for eight seconds at each preset station. Press 

A/PS 

again to stop 

scanning when the desired station is reached.

Stereo

The unit will automatically pick up a stereo signal, when available. When in stereo mode, the 

” icon appears in the display. When no stereo signal is available, the unit will automatically 

revert to mono operation, and no icon will be displayed.

Local/Distant (LOC)

Press the 

LOC

 button (6) to choose between Local (LOC) or Distance (DX) mode. This feature 

is used to designate the strength of the signals at which the radio will stop during automatic 
tuning. “Distance” is the default setting, allowing the radio to stop at a broader range of signals. 
To set the unit to select only strong local stations during automatic tuning, press the 

LOC

 

button until “LOC” appears in the display.

USA/EURO Tuning

Use the 

BAND

 button (21) switch between USA and European broadcast tuning.

1.

Turn the vessel ACC on and the radio off.

2.

Press and hold

 the 

BAND

 button for 5 seconds.

The LCD will display either “USA” or “EUR” as the new tuning region.

1

4

6

8

2

3

5

10

16

9

11

12

13

14

21

15

20

19

18

7

17

MCD5090

DIGITAL AUDIO

COMP

COMP ACT

ACT

MODE

MUTE

BAND

A/PS

EQ/LD

LOC

6

5

4

3

2

1

INT

RPT

RDM

-10

+10

AUX IN

AUX IN

PUSH

SEL

marine

 


background image

MCD5090

7

CD OPERATION

Insert and Eject Disc

Insert a disc, label-side up, with the unit turned on. “Cd” will display on the LCD (7) and then 
unit will play the first track on the disc. Press the eject 

 button (2) to stop disc play and eject 

the disc. The unit does not have to be turned on to eject the disc.

NOTE: If powered off, the unit will automatically power on when a CD is inserted.

Controlling Disc Playback

Track Select

Press the 

>>|

 (19) or

 |<< 

button (18) for less than one second to advance to the next track 

on the CD. CD play begins when the button is released.

Press  the

 -10

 button (13) to skip ten tracks backward.

Press the 

+10

 button (14) to skip ten tracks forward.

Press and hold

 the 

>|| 1

 button (9) to begin playback from the first track on the disc.

Press and hold

 the 

>>|

 (19) or

 |<<

 button (18) for >2 seconds to fast forward or fast 

reverse through the disc. 

Play/Pause Disc Playback (>|| 1)

Press the 

>|| 1

 button (9) to suspend disc play. Press the 

>|| 1

 button again to resume disc 

Play.

Intro Scan (INT 2)

Press the 

INT

 

2

 button (10) on the control panel to play the first 10 seconds of each track 

sequentially. Press 

INT

 

2

 again to stop Intro Scan and resume normal play at the current track.

Repeat Play (RPT 3)

Press the 

RPT 3

 button (11) during disc play to repeat play the current track. Press 

RPT 3

 

again to stop repeat play.

Random Play (RDM 4)

Press the 

RDM 4 

button (12) on the control panel during disc play to play all tracks on a CD in 

random, shuffled order. Press 

RDM 4

 again to stop random play.

1

4

6

8

2

3

5

10

16

9

11

12

13

14

21

15

20

19

18

7

17

MCD5090

DIGITAL AUDIO

COMP ACT

MODE

MUTE

BAND

A/PS

EQ/LD

LOC

6

5

4

3

2

1

INT

RPT

RDM

-10

+10

AUX IN

AUX IN

PUSH

SEL

marine

 


background image

MCD5090

8

SPECIFICATIONS

CD

Signal to Noise Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  > 70dB
Sampling Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  44.1Khz
Quantization Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 bit
Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-20,000Hz
Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   2 Channel (Stereo)

FM Radio

USA Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5-107.9MHz
EURO Frequency Range  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.50-108.00MHz
Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 15dB at S/N 30dB
Stereo Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   25dB at 1KHz
S/N Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50dB

AM/MW

USA Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530-1710KHz
EURO Frequency Range  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522-1620KHz
Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  < 45dB
S/N Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40dB

General

Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  DC 11 -14.4
Grounding System  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Negative Ground
Speaker Impedance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ohms
Power Output  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40W x 4

TROUBLESHOOTING

Symptom

Cause

Solution

No power

The vessel’s ignition is not 

on

If the power supply is properly 

connected to the vessel acces-

sory terminal, switch the ignition 

key to “ACC”.

The fuse is blown

Replace the fuse.

Disc cannot be loaded or 

ejected

Presence of CD disc inside 

the player

Remove the disc in the player and 

insert the new one.

Inserting the disc in reverse 

direction

Insert the compact disc with the 

label facing upward.

Compact disc is extremely 

dirty or disc is defective

Clean the disc or try to play a new 

one.

Temperature inside the ves-

sel is too high

Wait until the ambient tempera-

ture returns to normal.

Condensation

Leave the player off for an hour or 

so, then try again.

No sound

Volume is too low

Adjust volume to audible level.

Wiring is not properly con-

nected.

Check wiring connections.

The operation keys do 

not work

The built-in microcomputer 

is not operating properly 

due to noise

Press the reset button (17).

Sound skips

The installation angle is 

more than 30 degrees.

Adjust the installation angle to 

less than 30 degrees.

The disc is dirty or defec-

tive.

Clean the disc and try to play 

again or use new disc.

Cannot tune to radio sta-

tion, auto-seek does not 

work

The antenna cable is not 

connected.

Insert the antenna cable firmly.

The signals are too weak.

Select a station manually.

ERROR 1

Mechanism Error

Press the eject button to correct 

the problem.

If the error code does not disap-

pear, consult your nearest ser-

vice dealer.

ERROR 2

Servo Error

Press the eject button to correct 

the problem.

If the error code does not disap-

pear, consult your nearest ser-

vice dealer.

 


background image

MCD5090

9

 


background image

ASA Electronics Corporation

www.asaelectronics.com

www.jensenmarinedirect.com

©2012 ASA Electronics Corporation

v.062112