PDF User Manual

  1. Home
  2. Manuals
  3. Ipevo VZ-X User Manual

Ipevo VZ-X User Manual

Made by: Ipevo
Type: User Manual
Category: Document Camera
Pages: 11
Size: 0.54 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

Introduction

VZ-X Wireless/HDMI/USB Document Camera

ü

Overview

Camera

Its 8-megapixel sensor 

allows high-quality live 

streaming at a 

resolution up to 3264 x 

2448p (USB mode).

Multi-jointed Stand

Capture images at any angles.

Wi-Fi 

It allows for wireless live image 

streaming via 2.4GHz.

IPEVO VZ-X is a versatile 8-megapixel document camera that supports USB, HDMI, and Wi-Fi 

(2.4GHz) modes. This camera allows for easy live imaging at various indoor settings- offices, 

classrooms, and conference rooms- once connected to a PC/laptop/projector/TV or other 

compatible devices.

LED Indicators

Find out the Wi-Fi, streaming, 

and power status

Control Buttons

Power on/off VZ-X and LED lighting; change live 

image settings.

Base

A small and stable footprint that contains battery.

Switches & Ports

USB/Wi-Fi/HDMI 

switch; power 

frequency switch; 

USB/HDMI ports


background image

Microphone

The microphone is only functional when VZ-X is used in 

the Wi-Fi or USB mode. This is useful for video 

conferencing, recording lessons and more.

Power Switch

Turn VZ-X on/off.

Focus Button

Focus the live image or change the focus mode. 

- Press to focus the image.

- Press and hold until you hear a  “beep” alert to switch

from AF-Continuous to AF-Single.

- Press again to switch back to AF-Continuous.

Decrease Exposure

Decrease the exposure if the subject is too bright.

Increase Exposure

Increase the exposure if the subject is too dark.

Zoom Out

Zoom out on the live image.

Zoom In

Zoom in on the live image.

Rotate

Rotate the live image.

Filter

Apply video filter to the live image.

Light

Turn the built-in LED light on/off.

LED Indicators

- Green: VZ-X is powered on.

- Amber: VZ-X is in Wi-Fi mode.

- White: VZ-X is streaming image.

ü

Front View


background image

Micro-USB Port

Plug in the included Micro-USB cable here to:

- Connect VZ-X to a computer for use in USB mode.

- Provide power for VZ-X in HDMI mode.

- Charge VZ-X’s battery.

Frequency Switch

Change the power frequency to 50 Hz or 60 Hz.

HDMI Port

Connect your HDMI cable (not included) here.

Mode Switch

Switch between Wi-Fi and HDMI/USB mode.

ü

Back View


background image

ü

Top View

Snapshot Button

Take snapshots using this button. It is only 

functional in Wi-Fi and USB mode.

Battery Check Button

You can check VZ-X’s battery level by pressing this 

button.

Battery Status Indicators

Indicate the battery level or charging status.

Illumination

Add extra lighting with built-in LED light

Camera

Capture images


background image

Setup

ü

Connection ( USB )

ü

Connection ( HDMI )

You can use VZ-X in its USB mode with your computer (Mac/PC/Chromebook) via 

USB. You may use it with IPEVO Visualizer or other third party software. If your 

computer is connected to a projector, you can then project the live image from VZ-X 

to a large screen. To use VZ-X with your computer, please:

1. Connect the included Micro-USB cable to the Micro-USB port of VZ-X. Then,

connect the other end of the cable to the USB port of your computer.

2. Turn VZ-X on using the Power Switch.

3. Launch IPEVO Visualizer or a third party software of your choice. A live image

from VZ-X should appear on your computer. VZ-X is now ready to use.

Please follow the steps below to connect your VZ-X directly to a TV, projector or

monitor via HDMI:

1. Connect an HDMI cable (not included) to the HDMI port of VZ-X. Then,

connect the other end of the cable to the HDMI port of a TV, projector or

monitor.

2. Connect the included Micro-USB cable to the Micro-USB port of VZ-X. Then,

connect the other end of the cable to the USB port of your TV, projector or

computer to provide power for VZ-X. Or, you can also power VZ-X on by

connecting the cable to a 5V/2A USB power adapter (not included) and then

to an outlet.

3. Turn VZ-X on using the Power Switch. A live image from VZ-X should appear on

your HDMI display. VZ-X is now ready to use.


background image

ü

Connection ( Wireless )

To connect VZ-X wirelessly to your iOS/Android devices (iPad/iPhone/Android

Tablet/Android Phone), Mac or PC, please follow the steps below:

1. Download the free software “IPEVO Visualizer” for VZ-X at

http://support.ipevo.com/vzx.

2. Turn VZ-X on using the Power Switch.

3. Press the Battery Check Button and check VZ-X’s remaining battery level. Make

sure there’s sufficient battery power to last you through your session. If VZ-X is

low on battery, please recharge it by following the steps stated in “Charging VZ-X”.

4. Check the LED Indicator. Make sure the Green and Amber lights are on. If the

Amber light is not on, please switch VZ-X to its Wi-Fi mode using the Mode

Switch located on the back of its body.

5. Turn on the Wi-Fi of your device. Browse the available connections and connect

to VZ-X’s SSID. The unique SSID can be found on the label located on the bottom

of VZ-X.

6. Launch IPEVO Visualizer. A live image from VZ-X should appear on your device.

Note: 

(1) VZ-X only supports 2.4GHz Wi-Fi network and not 5GHz.

ü

Reset

You can reset VZ-X’s Wi-Fi network settings to the factory default. To do so, please:

1. Make sure VZ-X is in the Wi-Fi mode.

2. Turn VZ-X off if it hasn’t been done so.

3. Press and hold on both Increase Exposure and Decrease Exposure buttons.

4. Turn VZ-X on while holding down the buttons.

5. The LED Indicator will briefly show Green, Amber and White. You can then

release the buttons. VZ-X is now reset.


background image

ü

Charging VZ-X

Please charge VZ-X and make sure it has sufficient battery power before using it. The 

steps for charging VZ-X are as below:

1. Connect the included Micro-USB cable to the Micro-USB port of VZ-X. Next,

connect the other end of the cable to a 5V/2A USB power adapter (not included).

Then, plug the adapter to an outlet for charging.

Note:

(1) It is not possible to charge VZ-X via a USB port of a computer as it does not

provide sufficient power output for charging it.

(2) You can use VZ-X once it is plugged into a power outlet regardless of its

remaining battery power.

2. When VZ-X is charging, the Battery Status Indicators will light up green indicating

that VZ-X is receiving a charge. Do note that there are a total of five indicator lights:

the more indicators light up, the more battery charging is. All of the indicator lights

will light up when VZ-X is fully charged.

Note:

(1) VZ-X’s battery can last for at least 9 hours on a full charge.

(2) It takes approximately 9 hours to fully recharge VZ-X on an empty battery

assuming that it is powered off while recharging. It will take significantly

longer to fully recharge if it is in use.


background image

Product Specifications

3G A

. F E DG

A 9D J F F E

-HG

HF F

9

G H HF

8

FGE 9A 647 1 E 2 )

0 HF

A M

5 F 0

8 I

L

8 :

-

)

J

J )

J )

J

)

J

J

. 9H G

J ( )

(

J

(

) J

) J

J )

J

J

. 9H G

J

. 9H G


background image

/

F

B 2

P

5HH IF PF

610

DD

2FHPC

: P PC

I 5

I

P

5 A C OC 1SL O C

0CA C OC 1SL O C

2 A O . PP

-2

-2 /

9 RC RFPAE

F

B . AG

BC RFPAE

F 2F

. 40 5

2 CM C A

RFPAE ) 4U

4U

. OC

LOE P

. PPC /ECAG

FA

. P 9/

. P L RC B LPC

40 5 P LC -

FA LE C

. PPC HFDC ,

E

O

2 A O . UUC

F 2F

( 4U

H

610 5HH IF PF

A IC EC B

610 5 BFA P O

9 RC 5 BFA P

F 2F 5 BFA P

/ IC 5 BFA P

. PPC

P P O 5 BFA P


background image

Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

(1)

this device may not cause harmful interference, and

(2)

this device must accept any interference received, including 

interference

 

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for 

a Class A digital device, pursuant to part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful 

interference when the equipment is operated in a commercial 

environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the 

instruction manual, may cause harmful interference to radio 

communications. Operation of this equipment in a residential area is 

likely to cause harmful interference in which case the user will be 

required to correct the interference at his own expense.

 

Any changes or modifications not expressly approved by the party responsible 

for compliance could void the authority to operate equipment.

This

 

device

 

and

 

its

 

antenna

 

must

 

not

 

be

 

co-

located

 

or

 

operating

 

in

 

conjunction

 

with

 

any

 

other

 

antenna

 

or

 

transmitter.


background image

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an 

uncontrolled environment. This equipment should be installed and operated 

with minimum distance 20cm between the radiator & your body.

IC Certification of Radio Apparatus

This device complies with Industry Canada’s licence-exempt RSSs. Operation is 

subject to the following two conditions:

 

(1) This device may not cause 

interference; and (2) This device must accept any interference, including 

interference that may cause undesired operation of the device.

Le présent

 

appareil

 

est

 

conforme

 

aux CNR d'Industrie

 

Canada applicables

 

aux 

appareils

 

radio exempts de licence. L'exploitation

 

est

 

autorisée

 

aux deux

 

conditions suivantes

 

: (1) l'appareil

 

ne doit

 

pas produire

 

de brouillage, et (2) 

l'utilisateur

 

de l'appareil

 

doit

 

accepter tout brouillage

 

radioélectrique

 

subi, 

même

 

si

 

le brouillage

 

est

 

susceptible d'en

 

compromettre

 

le fonctionnement.

This device and its antenna(s) must not be co-located or operating in 

conjunction with any other antenna or transmitter.

Cet

 

appareil

 

et son antenne

 

(s) ne doivent

 

pas être

 

situés

 

ou

 

fonctionner

 

en

 

conjonction

 

avec une

 

autre

 

antenne

 

ou

 

émetteur.

This equipment complies with ISED radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

IC 

Radiation Exposure Statement: