INFINITI FITNESS Ergometer ST990 Owner's Manual - User Manual

Full Text Searchable PDF User Manual

INTRODUCTION

TABLE OF CONTENTS

Congratulations!

Save valuable exercise time in the long run.
Exercise safely and more effectively.
Learn proper techniques.
Be able to better define your fitness goals

Welcome to the world of the ELLIPTICAL TRAINER. The
ELLIPTICAL TRAINER is one of the finest and most
comprehensive pieces of home exercise equipment
available. We know, as we have been making them for over
10 years.

By choosing ELLIPTICAL TRAINER, you have made a
decision that will improve the health and fitness and well
being for you and your family. Being fit and healthy will
improve your energy levels and your quality of life.

Cardiovascular training is vital for all ages and the
ELLIPTICAL TRAINER provides a more effective workout,
producing better results and will encourage you to reach your
fitness goals and maintain the body you have always wanted.

All you need to do is to spend 15 to 30 minutes three times a
week to start seeing the benefits of a regular exercise
program on the ELLIPTICAL TRAINER.

We want you to enjoy the full benefits of your exercise
program and so we recommend that you read this manual
thoroughly and by doing so you will:

See ELLIPTICAL TRAINER

for Parts List and Exploded Drawing.

ASSEMBLY INSTRUCTIONS

Page No.

Care and Maintenance

13~14

COMPUTER BC-6880 OPERATING INSTRUCTIONS

11~12

COMPUTER SM-5062 & SR-5066 OPERATING INSTRUCTIONS

Correct Position

Dual Action Arm Height Adjustment

8~10

ELLIPTICAL TRAINER EXERCISES

ELLIPTICAL TRAINER PARTS IDENTIFICATION

ELLIPTICAL TRAINER WARRANTY

Feet Position

Foot Pedal Adjustment

General Information

Getting on Safely

Handle Bars

Height Adjuster Cap

HOW YOUR ELLIPTICAL TRAINER WORKS

IMPORTANT INFORMATION

INTRODUCTION

Medical / Safety

6~7

SETTING UP YOUR ELLIPTICAL TRAINER

TABLE OF CONTENTS

Wheeling & Storage

The ELLIPTICAL TRAINER is designed for Home
Use ONLY & should not be used in a commercial
environment.

ELLIPTICAL TRAINER

ELLIPTICAL TRAINER has been tested and
certified according to the European Norm
Standard.

ELLIPTICAL TRAINER ST990 braking system is
Speed Independent.

ELLIPTICAL TRAINER ST1200 braking system
is Speed Dependent.

needs servicing, repairs or something

is missing or broken ? , Please contact the

as soon as possible. They

should be able to help you immediately with any
and all problems you have. If for any reason that
you are unsatisfied with the level of service or
are unhappy with their cooperation, then you can
contact the manufacture directly at the following
contact details.

It is important to keep your Purchase Receipt !, As you
may be asked to produce it too authenticate your
Warranty.

It is also important to state which Model you
have, the ELLIPTICAL TRAINER has a sticker
attached which will state the Model Number.

The Warranty is in the back of the Manual.

Please continue to read the Owner's Manual and
all safety instructions thoroughly to familiarize
yourself with the ELLIPTICAL TRAINER before
using it.

Maximum Load = 150kg

Place-of-Purchase

the unlikely event that your ELLIPTICAL

TRAINER

EN 957 Part 1 & 9

Class H.A.

Pro Gym Co Taiwan Ltd

7F, No. 291 Ta Tun 4th Street

Taichung

Taiwan

TEL: +886-4-2258-3088

FAX: +886-4-2258-3137~8

sales@infinitifit.com

www.progymco.com

R e a d t h e O w n e r ' s M a n u a l a n d a l l s a f e t y
instructions thoroughly and familiarize yourself
with the ELLIPTICAL TRAINER before using it.

Before beginning any exercise program,
consult your physician. He or she can help
evaluate your present fitness level and
determine the exercise program that is the
most appropriate for your age and physical
condition.

If you experience any pain or tightness in
your chest, irregular heartbeat, shortness of
breath, faintness, or unusual discomfort
u p o n e x e r c i s i n g , s t o p a n d c o n s u l t a
physician before continuing.

Adult supervision is required at all times
w h e n

c h i l d r e n

a r e

o n

o r

n e a r

t h e

E L L I P T I C A L T R A I N E R . U n s u p e r v i s e d
c h i l d r e n s h o u l d k e e p a w a y f r o m t h e
equipment at all times.

Keep fingers and limbs, loose clothing and
hair away from moving parts.

Before each workout on your ELLIPTICAL
TRAINER we advise that a Precautionary
Safety Check is wise. All equipment should
be Safety Checked for wear & damage.

Replace defective

components immediately and/or keep the
equipment out of use until repaired. For
repair help - see General Information on this
page.

Care should be taken when getting on or off
this or any exercise equipment. Please
follow the Manual Instructions on page 8

U s e o n l y t h e a c c e s s o r y a t t a c h m e n t s
recommended by the manufacturer.

y o u

f i n d

a n y

d a m a g e

o r

d e f e c t i v e

components

using the ELLIPTICAL

TRAINER

STOP

IMMEDIATELY.

IMPORTANT INFORMATION - PLEASE READ

Failure to read and follow the safety instructions below may result in serious injury or even death.

Medical / Safety

Care and Maintenance

General Information

Your ELLIPTICAL TRAINER is made of the
highest quality materials, it is still important that
you take care of your ELLIPTICAL TRAINER on a
regular basis.

Your ELLIPTICAL TRAINER is for indoor use
only and should NOT be used or stored in damp
a r e a s . W i p e a l l p e r s p i r a t i o n f r o m y o u r
ELLIPTICAL TRAINER after each use.

These parts are assembled by the consumer and
should be checked regularly. Make sure that all
Nut & Bolts are tight and firm.

These parts are assembled by the consumer and
should be checked regularly. Make sure that all
Bolts are tight and firm.

These parts are assembled by the consumer and
should be checked regularly. Make sure that all
Knobs or Bolts are tight and firm.

These parts are assembled by the consumer and
should be checked regularly. Make sure that all
Bolts are tight and firm.

A l l P i v o t P o i n t s a r e a s p e c i a l d e s i g n ,
incorporating a space age plastic with lubricate
built inside. The Pivot Points are also pre-
greased by the Manufacturer & will last for a
lifetime under normal use.

If you wish to grease the 3x Pivot Points, use a
good quality grease that is friendly to plastic
(some grease destroys plastic). Disconnect the
Foot Pedal Tube [7] the Dual Action Arms [3 & 4]
Grease the moving parts & reassemble.

Regularly check tightness of nuts, bolts, and

pins, etc.

Dual Action Handle Bar [part#9,10,69,70,71]

Stationary Handle Bar [part#78,80]

Foot Pedals [part#42]

Base Tubes [part#5,6,58]

The 3x Pivot Points [part#3,4,7,15,65,67,72]

All Fasteners [Nuts, Bolts & Screws]

For

inspect your ELLIPTICAL TRAINER

on a regular basis, we suggest every 2~3 weeks.

SAFETY

SPECIAL ATTENTION TO COMPONENTS

MOST SUSCEPTIBLE TO WEAR

See ELLIPTICAL TRAINER

for Parts List and Exploded Drawing.

ASSEMBLY INSTRUCTIONS

DUAL ACTION ARM

HEIGHT ADJUSTER

KNOB

ELLIPTICAL TRAINER PARTS IDENTIFICATION

HOW YOUR
ELLIPTICAL TRAINER
WORKS

The ELLIPTICAL TRAINER allows your feet to
move in a natural elliptical path, minimizing the
impact on your hips, knees and ankles.

The ELLIPTICAL TRAINER provides smooth,
quiet and variable exercise capabilities with:

Dual Action Handles for total body
workout.

Specially designed Dual Action Handle
Bar Knobs maximizing comfort and
range.

Stationary Handle Bar for stability and
glute workout.

L a r g e A d j u s ta b l e F o o t P e d a l s f o r
different foot positions and workout
intensities.

Dual Action Arm Height Adjustment to
vary the elliptical shape, feeling &
workout intensity plus it allows you to
customize your ELLIPTICAL TRAINER
to your own personal level.

Height Adjuster Caps allow you to level
your ELLIPTICAL TRAINER with ease.

STATIONARY
HANDLEBAR

DUAL ACTION

HANDLEBAR

WATER BOTTLE

HAND PULSE

DUAL ACTION HANDLEBAR KNOBS

DUAL ACTION HANDLEBAR

COMPUTER

DUAL ACTION ARM

HEIGHT ADJUSTER

DUAL ACTION ARMS

PIVOT POINT 1.

UPRIGHT TUBE

SOFT “P.V.C”

TRANSPORTATION

WHEELS

ADJUSTABLE FOOT PEDAL

FOOT PEDAL ADJUSTER KNOBS

PIVOT POINT 2.

HAT COVER

FOOT HEIGHT ADJUSTER CAPS

PIVOT POINT 3.

Large Adjustable Foot Pedals for different foot
positions and workout intensities.

Loosen 2x Knobs[42].

Slide the Foot Pedal to your desired setting
using the number setting as a guide.

Tighten 2x Knobs[42].

Dual Action Arm Height Adjustment allows you to
vary the elliptical shape, feeling & workout
intensity plus it allows you to customize your
ELLIPTICAL TRAINER to your own personal
level.

Remove Knob [17].

Move it up or down to your desired position
(check that both the Right & Left sides are
set to the same levels).

Reinsert Knob [17] And tighten firmly.

IMPORTANT:

Clockwise

direction = Down

Clear a workout area 2 x 2.5 Meters before
setting-up your ELLIPTICAL TRAINER. Ensure
the floor is solid and level.

To stabilize your ELLIPTICAL TRAINER we
h a v e d e s i g n e d a v e r y s p e c i a l h e i g h t
adjustment system.

Make sure the Left & Right Front Base Tube
[6] is touching the ground.

Ascertain which side of the Rear Base Tube
[5] is off the ground & adjust the appropriate
Height Adjuster Cap [53], with the side of
your foot, rotate the Wheel in a

SETTING UP YOUR ELLIPTICAL TRAINER

Height Adjuster Cap

Foot Pedal Adjustment

Dual Action Arm
Height Adjustment

Clockwise = Down

The Elliptical Trainer Foot Pedals are extra long
allowing variable foot positions depending on
your preference.

The further back your feet are on the Foot Pedal,
the greater the vertical height of the elliptical
motion and the harder the workout.

Begin with your feet in the most forward position
and move your feet to the position that feels most
comfortable and best suits your capabilities.

Move to the front of the machine and ensure Dual
Action Arms [3 & 4] are even (one Foot Pedal at
top of Elliptical Disk and other at bottom).

Grasp the Stationary Handlebar with both hands
and pull back, tipping the machine towards you.

Once balanced wheeling the machine is made
easy with the special Soft PVC Tires on the
Wheels to protect your floors & carpet.

The Elliptical Trainer comes with two Dual Action
Handles and a Stationary Handlebar.

A l w a y s h o l d t h e St a t i o n a r y

Handlebar when getting on and off the Elliptical
Trainer. First time users should familiarize
themselves with using the Elliptical Trainer by
using the Stationary Handlebar first and then
progressing to the Dual Action Handles.

I M P O R TA N T:

Once you have familiarized yourself with using
the Elliptical Trainer, you can progress to using
the Dual Action Handles to provide a total body
workout.

Hands can be positioned on the Dual Action Handles at
the most appropriate position for your height and arm
length.

SETTING UP YOUR ELLIPTICAL TRAINER

Feet Position

Wheeling & Storage

Handle Bars

Lift your right foot over machine and place on
right Foot Pedal.

Get balanced and begin your workout.

Place your left foot on the left Foot Pedal and
get secured.

IMPORTANT:

Caution should always be taken

when getting on and off any exercise machine.
Please follow the correct procedure below.

Ensure the left Foot Pedal is in the lowest
position.

Grasp the Stationary Handlebar with both
hands.

ELLIPTICAL TRAINER EXERCISES Getting on Safely

When going in reverse, bend your knees inwards
slightly as this will put more emphasis on the
buttocks and hamstrings.

The Elliptical Trainer can be used in a forward or
reverse motion.

Always try and use the ELLIPTICAL TRAINER in
a rhythmical and smooth motion.

Your body should be in an upright position so that
your back is straight.

Keep your head up to minimize neck and upper
back strain.

ELLIPTICAL TRAINER EXERCISES Correct Position

Correct Position

Forward

Reverse

This position utilizes all the major muscle
groups.

Keep your body in an upright position with
your head up.

Muscles Used:

Handle Bar : Stationary or Dual Action

Thigh, Calf, Hamstring

Buttocks

Basic Upright

ELLIPTICAL TRAINER EXERCISES

IMPORTANT: The Elliptical Trainer can be used in a forward or reverse motion.

Muscles Used:

Handle Bar : Stationary or Dual Action

Thigh, Calf, Hamstring

Buttocks

Hamstrings & Buttocks

Muscles Used:

Handle Bar : Stationary

Thigh, Calf, Hamstring

Buttocks

Thigh & Calf

Leaning back in a sitting type position concentrates
the workout on the hamstrings and buttocks.

Leaning forward on the Elliptical Trainer
concentrates the workout on your thighs
(quadriceps) and calves.

BATTERIES:

POWER ON:

AUTO POWER OFF/ON:

LOW BATTERY WARNING:

LCD DISPLAY:

MANUAL MODE:

Open the battery compartment at the rear of the computer and install 4 x C

batteries. If the LCD is not clear and only partial segments are displayed then remove the
batteries, wait 15 seconds, and reinstall them. If the problem persists then install new batteries. If
new batteries do not fix the problem then consult your retailer. Under normal use the batteries
will last 6 months. AC adaptor socket for 6 volt @ 100mA AC adaptor, fitted on back of case,
optional.

The power will automatically turn on when the batteries are installed or when any

key is pressed or when the computer receives a speed signal.

As long as you are working out the computer will operate. If there is

not input for 4 minutes then the computer will automatically turn off. All existing values will be
held until the computer is powered up again.

If the battery symbol with the word "LOW" is flashing then replace

the batteries as soon as possible. If the battery power is too low then the computer will not be
able to adjust the resistance settings.

Liquid Crystal Display

This mode can be selected at any time by pressing QUICK START. This quick

start mode will allow users to immediately start exercising without entering any data. When the
computer is powered up press the QUICK START KEY and start exercising.

KEYS:

SELECT:

ENTER:

START/STOP QUICK START:

RESET:

RECOVERY:

There are 4 KEYS along the bottom of the monitor and 2 KEYS further up. Each key

indicates its function. Press the KEY in the center with moderate pressure. Some KEYS can be
pressed and held to cycle the LCD Display. Do not hit the KEYS.

These KEYS allow you to browse through the available selection then press ENTER

to confirm your selection. These KEYS also increase or reduce the Resistance Level.

Will confirm a selection.

By pressing this KEY the computer will START and STOP. When

the computer is in the stop mode STOP will be displayed. If no sensor input is detected for 4
seconds the computer will stop and STOP will be displayed. All functions will resume when the
sensor input is reactivated or the START key is pressed.

Press this key once to revert back to the previous display. Pressing and holding the

RESET key for 2 seconds will reset all functions and return you to the personal data entry
section.

Pressing this key at the end of your workout will activate the recovery function and

test your fitness level. You must maintain pulse input during the 60 second recovery countdown
test.

PERSONAL

DATA

ENTRY

RESET

RECOVERY

START/STOP QUICK START

KEYS

LCD DISPLAY

TRAINING

PROGRAM

GUIDE

ENTER

LOW

BATTERY

WARNING

Basic Functions

SELECT

BAR GRAPH

COMPUTER SM-5062 & SR5066 OPERATING INSTRUCTIONS

BAR GRAPH:

ELAPSED TIME:

SPEED:

RPM:

DISTANCE:

CALORIES:

HEART RATE:

RESISTANCE LEVEL:

PERSONAL DATA STORAGE:

MANUAL MODE:

This display is made up of 128 segments, 16 horizontal column segments

and 8 vertical row segments. The vertical segments represent the resistance level and the
horizontal segments represent Time. Each vertical segment will represent 2 resistance
levels; the exact level will be displayed in the smaller resistance LCD. If Time is not preset
(counts up) then each column segment represents 1 minute. If Time is preset to say 20
minutes the Time period is divided equally into the 16 columns. (Each column is 1min 15
sec)

Time counts up from 00:00 to 99:59.

Speed is displayed in km/h from 0.0 to 99.9. This function is displayed for 4

seconds and then RPM is displayed for 4 seconds.

Displays the pedal crank speed in revelations per minute from 0 to 999. This

function is displayed for 4 seconds and then SPEED is displayed for 4 seconds.

Distance is displayed in km/h from 0.00 to 99.99.

Calories are displayed in Kilocalories from 0 to 999.

Heart Rate is displayed in BPM (bests per minute) from 30 to 240. NOTE:

When the sensor detects your heart rate the ? symbol will flash on the display in unison.

The smaller LCD will display only the resistance level from

1 to 16.

There are 9 separate user personal data storage files

listed from U1 to U9. When the computer is powered-up it will first display the wheel size
setting of 78.0 for 2 seconds then automatically enter the user data storage section where
you will be asked to enter your sex, age, height and weight. The first user number
displayed will be the last user number selected. Press the SELECT keys to select the
required user number, U1 to U9, press ENTER. The computer will now enter the personal
data entry section and the male symbol will flash (along with the STOP indicator). If there
is no change to your personal data from the last workout press ENTER quickly 4 times.
Press the SELECT key to change to female. Once the correct sex symbol is flashing
press ENTER. The computer will now prompt you to enter your correct age. Press the
SELECT KEYS until your correct age is flashing then press ENTER. Enter your height in
cm. Select your correct height and press enter. NOTE By pressing and holding either of
the SELECT keys the display will cycle rapidly. Now select and enter your weight in Kg.
Press ENTER. You will now enter the programming mode.

All program selections will be flashing (along with the STOP indicator). Selections are
MANUAL, PROGRAM, USER and TARGET H.R. Press the SELECT key until the
program you want is flashing, press ENTER.

This mode can be selected at any time by pressing QUICK START.

This quick start mode will allow users to immediately start exercising without entering any
data. When the computer is powered up press the QUICK START key and start
exercising. Ifyou want the correct value for CALORIES you should enter your correct

COMPUTER SM-5062 & SR5066 OPERATING INSTRUCTIONS

personal data or select your preprogrammed user number. You have the opportunity to

Preset one countdown value from TIME, DISTANCE or CALORIES and the value for both
WATTS and HEART RATE. The function to be preset will be flashing. Press the SELECT
key until the desired value is displayed then press ENTER. Pressing ENTER again and
again will cycle through all presettable functions. Press START and begin exercising.
Adjust the resistance level to suit.

Available in MANUAL MODE only. (Also referred to as

Speed Independent Mode). The resistance level will automatically adjust to the preset
WATTS value regardless of Speed (except for very slow Speeds and higher Watts
settings where the resistance can only increase to level 16, maximum).

You will have the option to choose from 12 program profiles P1 to

P12. The program profiles are displayed on the front panel. The display will show the
program number for 1 second then the profile will be displayed. Select the profile you
want and press ENTER. (If you want to reselect the profile press RESET once). You now
have the opportunity to preset one countdown values from TIME, DISTANCE or
CALORIES and the value for your HEART RATE. Press the SELECT key until the desired
value is displayed then press ENTER. Pressing ENTER again and again will cycle
through all presettable functions. Press START and begin exercising. Once the program
has started the first segment of the profile will flash, you can adjust the resistance level
and the entire profile will be adjusted.

This program has a blank profile that can be preset by any

user. Resistance levels from 1 to 16 can be selected across all 16 time segments. Press
the SELECT key until the desired level for that segment is selected then press ENTER.
Move across all 16 segments until the profile is built. You will also have the opportunity to
preset any countdown value available in the PROGRAM MODE. Once you have pressed
START you can adjust the resistance level of any segment. The profile as displayed when
STOP is pressed will be stored for future use.

There are 4 heart rate programs available. 55%, 75%, 90% and

THR. (Formula for percentage heart rate programs is 220bpm minus your age multiplied
by the percentage required). Press SELECT and cycle through the programs. Your target
heart rate will be displayed for each preset program. Press ENTER for the desired
program. If you select the THR program you have the option to preset the heart rate value
you wish. For all programs you also have the opportunity to preset countdown values for
TIME, DISTANCE and CALORIES.

This function evaluates your fitness level by measuring how quickly your

heart rate "recovers" over a period of I minute. At the end of your workout press the
RECOVERY KEY. The computer will STOP all functions except HEART RATE and TIME,
which will start to countdown from 60 seconds. HEART RATE sensor input MUST be
maintained during the RECOVERY test. When the timer reaches 00 your recovery score
will be displayed from F1 to F6.

Press the RECOVERY KEY to return to the main display.

WATTS DEPENDANT MODE:

PROGRAM MODE:

USER PROGRAM MODE:

TARGET H.R. MODE:

RECOVERY:

F1 -SUPER FIT
F2 - VERY FIT
F3 - FIT
F4 - FAIR
F5 - UNFIT
F6 - VERY UNFIT

Display Functions

Programming Mode

Programming Functions

No. 2 LED DISPLAY:

No. 3 LED DISPLAY:

POWER ON:

START STOP:

SCAN:

SELECT:

UP & DOWN:

ENTER:

WATTS:

TIME:

K/CALORIES:

This can display selected functions, TIME,

K/CALORIES, SPEED, and DISTANCE. The function to be displayed can be
selected by pressing the SELECT key or all functions can be displayed for 4
seconds each in rotation by pressing the SCAN key. The function being
displayed is indicated by its associated LED.

Normally displays HEART RATE - PULSE unless the

resistance level changes. When this happens the display will show the new
resistance level, L1 through L16, for 5 seconds and then return to HEART
RATE.

By pressing the POWER ON key or by rotating the pedal ½ turn.

If there is no pedaling for 1 minute the power will automatically turn off.

When all data has been entered press START.

NOTE; if you take too long to enter your exercise data without turning the pedal
occasionally then the AUTO POWER OFF could be activated turning off the
monitor.
Press STOP to freeze all displays.

Lock the No.2 LED DISPLAY or SCAN through TIME, CALORIES,

SPEED, DISTANCE.

Will change the LED light next to a heading (e.g TIME, CALORIES,

SPEED, DISTANCE) or (TRAINING PROGRAMS = MANUAL, PEAK,
HIKING, VIGOROUS, ENDURANCE, COURSE, WATTS, HEART RATE)

By pressing the UP and DOWN keys you can select the desired

program.

Press to input your chosen data.

Displays watts produced and is updated every 10 seconds.

Counts up to 99:59 minutes or counts down from the same value.

ENTERING TIME: When the TIME LED display is flashing and if you want to
exercise for a preset amount of time then press the UP and DOWN keys until
the desired time is displayed, then press ENTER. If you don't want to
countdown time then press ENTER while the display is flashing 00:00.

This value is the sum total of "work done" during your entire

exercise workout. This is not the value for "calories expended." This value is
determined by the Resistance setting, the Speed and Time, all factors related
to exertion and it starts to accumulate from the first second of the workout. The
human body, like most machines, is about 1/3 efficient. Energy expended is
about 1/3 of energy consumed. So for an approximate "calories expended"
value the K/CALORIES produced value can be multiplied by 3. Use this
K/CALORIES function to compare daily workouts. If you have performed a
good workout today then this K/Calorie value should be compared to what you
can do tomorrow.

KEYS:

There are 7 keys along the bottom of the monitor. Each key indicates its

function. Press the key in the center with moderate pressure. Some keys can
be pressed and held to cycle the display. Do not hit the keys

These KEYS also increase or reduce the Resistance Level.

COMPUTER BC-6880 OPERATING INSTRUCTIONS

(with Bright LED Display)

TRAINING

PROGRAMS

DOT

MATRIX

DISPLAY

LOW

BATTERY

WARNING

No.2

LED DISPLAY

No.1

LED DISPLAY

No.1

LED DISPLAY

POWER

ENTER

DOWN

START

STOP

SELECT

SCAN

BATTERY COMPARTMENT

BATTERY COMPARTMENT:

LOW BATTERY WARNING:

DOT MATRIX DISPLAY:

TRAINING PROGRAMS:

No. 1 LED DISPLAY:

6 x size AA alkaline rechargeable batteries.

If there is no pedal rotation the monitor is running on its batteries only

and AUTO POWER OFF will be activated after 1 minute. During this time if the batteries a low the
LOW BATTERY warning LED (top right hand LED on the dot matrix) will flash and the power will turn
off after 10 seconds.

This display is 8 segments high and 16 segments wide. The vertical

segments represent the resistance setting. There are 16 resistance levels so each segment will
represents 2 levels. The horizontal segments represent 1/16th of your workout time. If you select a
workout time of 20 minutes then each segment will represent 1 minute15 seconds and so on. The
current time vertical segment will flash.

When all program LED's are flashing at the same time then PROGRAMS

can be selected or changed. When a PROGRAM has been selected then only that PROGRAM LED
will stay on.

This constantly displays WATTS, the amount of power being generated by the

users.

KEYS

Basic Functions

Numbered Displays

200

195

190

185

180

175

170

165

160

155

150

145

170

166

162

157

153

149

145

140

136

132

128

123

140

137

133

130

126

123

119

116

112

109

105

102

100

105

110

115

120

125

130

135

140

145

150

155

160

165

170

175

180

185

190

195

200

205

210

215

220

Age

Pul

Max.

85%

70%

Training Zone Heart Rate Chart

This Chart is used in conjunction with the HEART RATE Program.

HEART RATE PROGRAM:

When the HEART RATE

LED is flashing enter your target heart rate. Refer to the
chart below for the correct value based on your age
and the percentage of your maximum heart rate you
wish to target. The monitor will automatically adjust the
resistance level to maintain your target heart rate.

SPEED:

DISTANCE:

RESISTANCE LEVEL:

HEART RATE:

PEAK
HIKING
VIGOROUS
ENDURANCE
COURSE

MANUAL PROGRAM:

WATTS PROGRAM:

HEART RATE PROGRAM:

Displays speed in miles per hour and is

updated every 10 seconds.

Displays distance in kilometers or miles,

depending on what country you live in.

Displays the resistance level

for 5 seconds only when it changes. There are 16
resistance levels.

Displays the value in beats per minute

(BPM). See the Training Zone Heat Rate Chart.

Select the desired program.

The dot matrix display will show the profile of the
program. After the program has been selected press
ENTER to advance to the TIME display.

Instant Manual Mode - If you

want to get started immediately simply press the
START key. If you want to enter the exercise time then
press ENTER.

This is a special program that

automatically adjusts the resistance level to the watts
value selected regardless of SPEED.

When the

WATTS LED display is flashing enter the desired watts
value by pressing the UP and DOWN keys then press
ENTER.

The watts you are producing, which is

dependant on speed, is monitored and every 10
seconds and the resistance will increase or decrease
to maintain the watts value you entered. Start with a
value of 75 watts until you are familiar with this
program.

When the HEART RATE

Numbered Displays

continued

COMPUTER BC-6880 OPERATING INSTRUCTIONS

(with Bright LED Display)

Course Programs

Additional Programs

ELLIPTICAL TRAINER WARRANTY

ELLIPTICAL TRAINER warrants that their products are free of defects in workmanship and
materials, and will repair or replace defective parts, free of charge, for a period of one year from
the date of purchase.

This warranty applies to the ELLIPTICAL TRAINER products only while the products remain in

the possession of the original purchaser and proof of purchase is demonstrated.

This warranty applies to residential use only (unless specifically stated by ELLIPTICAL

TRAINER to be warranted for institutional use) and is void when used in a non-residential
environment.

This warranty excludes misuse, abuse, alteration, improper service, or non ELLIPTICAL

TRAINER product modifications.

This warranty is in lieu of all warranties, expressed or implied, and/or all other obligations or

liabilities on the part of ELLIPTICAL TRAINER, and we neither assume nor authorize any
person to assume for us any other obligation or liability in connection with the sale of these
products. Under no circum-stances shall ELLIPTICAL TRAINER be liable by virtue of this
warranty or otherwise for damage to any person or property whatsoever for any special,
indirect, incidental, secondary or consequential damage of any nature whatsoever arising out
of the use or inability to use these products.

This warranty is valid only in accordance with the following conditions: