Full Text Searchable PDF User Manual
Page: 1/16
PAH-1229 Mobile Air Conditioning
User Manual
Page: 2/16
Content
I.
Notes………………………………………………….…... .…... . 3
II. Features and Components......................................................... 5
III. Installation and Adjustment................................................... . 7
IV. Control Setting.............................................................. .…... . 9
V. Drainage Instructions .............................................................. 13
VI. Maintenance………………………………………………… 14
VII. Troubleshooting ................................................................….. 15
VIII.
Appendix
…………………………………………………… 16
Page: 3/16
Thank you for choosing the luxurious and elegant mobile air conditioning. Please
keep the manual for later review, and read the manual carefully before use.
I. Notes
Notes:
*
The air conditioning is only suitable for indoor use, and is not suitable for other applications.
*Follow local grid interconnection rules while installing the air conditioning and ensure that it is
properly grounded. If you have any question on electrical installation, follow the instructions of
the manufacturer, and if necessary, ask a professional electrician to install it.
*Place the machine in a flat and dry place and keep a distance of above 50cm between the
machine and the surrounding objects or walls.
*
After the air conditioning is installed, ensure that the power plug is intact and firmly plugged
into the power outlet, and place the power cord orderly to prevent someone from being tripped or
pulling out the plug.
*Do not put any object into the air inlet and outlet of the air conditioning. Keep the air inlet and
outlet free from obstructions.
*When drainage pipes are installed, ensure that the drainage pipes are properly connected, and
are not distorted or bended.
* While adjusting the upper and lower wind-guide strips of the air outlet, pluck it with hands
gently to avoid damaging wind-guide strips.
*
When moving the machine, make sure that it is in an upright position.
*The machine should stay away from gasoline, flammable gas, stoves and other heat sources.
* Don't disassemble, overhaul and modify the machine arbitrarily, otherwise it will cause a
machine malfunction or even bring harm to persons and properties. To avoid danger, if a machine
failure occurs, ask the manufacturer or professionals to repair it.
Page: 4/16
*
Do not install and use the air conditioning in the bathroom or other humid environments.
* Do not pull the plug to turn off the machine.
* Do not place cups or other objects on the body to prevent water or other liquids from spilling
into the air conditioning.
*
Do not use insecticide sprays or other flammable substances near the air conditioning.
* Do not wipe or wash the air conditioning with chemical solvents such as gasoline and alcohol.
When you need to clean the air conditioning, you must disconnect the power supply, and clean it
with a half-wet soft cloth. If the machine is really dirty, scrub with a mild detergent.
*
The appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and maintenance shall not be made by children
without supervision.
Page: 5/16
II. Features and Components
1. Features
New look, compact structure, streamlined machine, aristocratic atmosphere.
With cooling, heating (single cold with no such function), dehumidification and fan function.
Automatic swing leaf in the outlet has automatic air swing function, and the outlet can be
covered when the machine is turned off to prevent dust from entering the body.
LED displays the control panel. The machine is beautiful and elegant. High-quality LCD remote
control is equipped to facilitate operation. The remote control can be placed on the back of the
body. It adopts a user-friendly remote control storage design.
Handles on both sides adopt dividing point design, so that it is easier to carry it and the body
design is more humane.
The structure of wrapping the power cord on the back facilitates users to hang the power cord
without hanging it down to the ground and staining and damaging the power cord.
Outdoor interface is set high to facility assembly and keep the smooth flow of the heat pipe.
Air filtration capability.
Timing switch function,
Protection function of automatically restarting the compressor after three minutes, a variety of
other protection functions.
Page: 6/16
2. Components:
Page: 7/16
III. Installation and Adjustment
1. Installation:
Warning: before using the mobile air conditioning, keep it upright for at least two hours.
The air conditioning can be easily moved in the room. In the moving process, ensure that the air
conditioning is in the upright position and the air conditioning should be placed on a flat surface.
Do not install and use the air conditioning in the bathroom or other humid environments.
1.1 Install the heat pipe assembly (as shown in Figure 1): screw the heat pipe assembly (exhaust
fitting end) into the exhaust port on the rear panel (counterclockwise).
Figure2 Figure2 Figure3
Figure 1
1.2 Install the window sealing plate assembly
1). Half open the window, and mount the window sealing plate assembly to the window (as
shown in Figure 2 and Figure 3); the assembly can be placed in horizontal and vertical
direction.
2
)
Pull various components of the window sealing plate assembly open, adjust their opening
distance to bring both ends of the assembly into contact with the window frame, and fix
various components of the assembly.
1.3 Install the body
1
)
Move the machine with installed heat pipe and fittings before the window, and the
distance between the body and walls or other objects shall be least 50 cm (as shown in
Figure 4).
Figure 4
Page: 8/16
2
)
Elongate the heat pipe and snap the flat end of the heat pipe joints into the elliptical hole
of the window sealing plate assembly (as shown in Figure 5 and Figure 6) .
Notes: 1. the flat end of the heat pipe joints must be snapped into place.
2. The pipe cannot be distorted nor has substantial turning (greater than 45 °). Keep the
ventilation of the heat pipe unobstructed.
Figure5 Figure 6
Important Notice
The length of the exhaust hose shall be 280~1,500mm, and this length is based on the
specifications of the air conditioning. Do not use extension tubes or replace it with other different
hoses, or this may cause a malfunction. Exhaust must be unobstructed; otherwise it may cause
overheating.
Page: 9/16
IV. Control Setting
I.
Operating instructions:
LED Control Panel Operation interface is as follows:
Page: 10/16
1:
when the machine is powered on for the first time, the buzzer will shout, and then the
machine will get into standby status.
2: Power Key
: press the key to turn on and turn off the machine. In the case of power on,
press the key to turn off the machine; in the case of power off, press the key to turn on the
machine.
3: Mode Selection Key:
In the case of power on, press the key to switch between cooling
→ dehumidification →fan → heating (single cold with no such function) → cooling → ...
mode.
4: Up Key and Down Key
: press the two keys to change the set temperature or timing sett
value, operate as follows:
While setting temperature, press up key or down key to select the required temperature (not
available in fan or dehumidification mode).
While setting timing value, press up key or down key to select the required timing value.
Simultaneously press both keys to switch between Celsius (
℃
) and Fahrenheit (
℉
).
5: Fan Speed Selection Key:
In cooling mode, press the key to select high, medium or low wind speed operation.
In fan mode, press the key to select high, medium or low wind speed operation.
In heating mode, press the key to select high, medium and low wind speed operation.
In dehumidification mode, pressing the key is invalid, and the fan will forcibly choose
low wind speed operation.
6: Timing Key:
In the case of power on, press the key to close timing; in the case of power off, press
the key to open timing.
Press the key, when the timing symbol flashes, press up and down key to select the
required timing value.
Timing values can be set within 1-24 hours and the timing value is adjusted upwards
or downwards by one hour.
7: Sleep Mode:
In the cooling/Heating Mode,Press the UP and Fan Key to turn on the sleep
mode,then the unit will work on Energy-Saving and quiet type.
Note:
* Can not turn on the sleep mode in the dehumidifying or Fan mode!
①
Display window
②
Remote control receiver
③
Water full indicator
Page: 11/16
* Can use the remote control to set the sleep mode.
II. Operating Instructions of the Remote Control
Operation interface of the remote control is as follows
Instructions of key operation of the high-quality remote control are as follows:
1. Power: Press
the key to turn on or turn off the machine.
2. Mode: press
the key to switch between cooling, air supply, dehumidification mode.
3. Up: press
the key to increase temperature and timing set value.
4. Down: press
the key to reduce temperature and timing set value.
5. Fan: press
the key to select high, medium and low wind speed output circularly.
6. Timer: press
the key to set timing value.
7.
Swing
:
Press
t
he key to open or close swing style. Air flow of the air outlet can
blow at different angles.
8. press
the key to switch between Celsius and Fahrenheit.
9. Sleep Mode: Press
the key to turn on the sleep mode.
Page: 12/16
III. A Variety of Protection Functions
3.1 Frost Protection Function:
In cooling, if the temperature of the EVA pipe sensor is too low, the machine
will automatically enter protection status; if the temperature of the EVA pipe
sensor rises to a certain temperature, it can automatically revert to normal
operation.
3.2 Overflow Protection Function:
When water in the water pan exceeds the warning level, the machine will
automatically sound an alarm, and the W.F indicator will flash. At this point,
you need to drainage the water (details see
Drainage Instruction
s at the end of
this chapter). After the water is emptied, the machine will get into standby
status.
3.3 Automatic Defrosting:
In heating, the machine has automatic defrosting function. After defrosting, the
machine will automatically return to the original status.
3.4. Overheat Protection:
To protect the service life of the machine, the machine has overheat protection in
heating mode. During the protection period, the compressor and the lower motor will
stop operation and will automatically return to normal heating state after the
temperature of the machine recovers.
3.5 Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting
protection function after the compressor is turned off.
V. Drainage Instructions
1. Manual drainage:
1
)
When the machine stops after the water is full, please unplug the power plug.
Notes: Please move the machine carefully, so as not to spill the water in the water pan at the
bottom of the body.
2
)
Place the water container below the side water outlet behind the body.
3
)
Unscrew the drainage cover and unplug the water plug, the water will automatically flow
into the water container.
Notes: 1. Keep the drainage cover and the water plug properly.
2. During drainage, the body can be tilted slightly backwards.
3. If the water container cannot hold all the water, before the water container is full,
stuff the water outlet with the water plug as soon as possible to prevent water from
Page: 13/16
flowing to the floor or the carpet.
4
)
When the water is discharged, stuff the water plug, and tighten the drainage cover.
Notes: 1. Restart the machine after the water plug and drainage cover are installed,
otherwise condensate water of the machine will flow to the floor or the carpet.
2. Continuous drainage (only applicable to cooling and dehumidification mode), as shown in
figure:
1
)
Unscrew the drainage cover, and unplug the water plug.
2
)
Set the drainage pipe into the water outlet.
3
)
Connect the drainage pipe to the bucket.
VI. Maintenance
Cleaning: before cleaning and maintenance, turn off the machine and unplug
the plug.
1.
Clean the surface
Clean with surface of machine with a wet soft cloth. Don't use chemicals, such as
benzene, alcohol, gasoline, etc.; otherwise, the surface of the air conditioning will
be damaged or even the whole machine will be damaged.
2.
Clean the filter screen
If the filter screen is clogged with dust, and the effectiveness of the air conditioning is reduced,
be sure to clean the filter screen once every two weeks.
Page: 14/16
2.1: Clean the upper filter screen frame
1
)
Clasp the wedging block of the EVA filter screen frame with hands. Force down from the
outside to remove the EVA filter screen frame. Unscrew four screws fixing the EVA filter
screen and the rear housing to remove the EVA filter screen
(as shown in the above figure) .
2
)
Put the EVA filter screen into warm water with neutral detergent (about 40
℃
/ 104
℉
) and
dry it in the shade after rinsing clean.
2.2: Clean the lower filter screen frame
1
)
Hold the handle of the CON filter screen frame, and pull it outward gently to remove it.
2
)
Put the CON filter screen into warm water with neutral detergent (about 40
℃
/ 104
℉
) and
dry it in the shade after rinsing clean.
Postseason Storage:
1: Unscrew the drainage cover, unplug the water plug, and discharge the water in the water pan
into other water containers or directly tilt the body to discharge the water into other
containers.
2: Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until the
drainage pipe becomes dry, so as to keep the inside of the body in a dry state and prevent it
from mildewing.
3: Turn off the machine, unplug the power plug, and wrap the power cord around the wrapping
post; install the water plug and the drainage cover.
4: Remove the exhaust pipe and keep it properly.
5: Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place, keep it
out of the reach of children, and take dust control measures.
6: Remove batteries of the remote control and keep them properly.
Note:
ensure that the body is placed in a dry place and keep all machine components properly.
Page: 15/16
VII. Troubleshooting
Do not repair or disassemble the air conditioning by yourself. Unqualified repair will lead to
failure of the warranty card, and may cause damage to users or their properties.
Problems
Reasons
Solutions
The air
conditioning
does not work.
There is no electricity.
Turn it on after connecting it to a socket with
electricity.
The water-full indicator will flash.
Discharge the water inside.
The ambient temperature is too low or
too high
Recommend to use the machine in at the
temperature of 7-35
℃
(44-95
℉
).
In cooling mode, the room
temperature is lower than the set
temperature; in heating mode, the
room temperature is higher than the
set temperature.
Change the set temperature.
In dehumidification mode, the
ambient temperature is low.
The machine is placed in a room with an
ambient temperature of greater than 17
℃
(62
℉
).
The cooling or
heating effect is
not good
There is direct sunlight.
Pull the Curtain.
Doors or windows are open; there are
a lot of people; or in cooling mode,
there are other sources of heat.
Close doors and windows, and add new air
conditioning.
The filter screen is dirty.
Clean or replace the filter screen.
The air inlet or outlet is blocked.
Clear obstructions.
Big Noise
The air conditioning is not placed on a
flat surface.
Put the air conditioning on a flat and hard
place (to reduce noise).
compressor does
not work.
Frost production starts.
Wait for 3 minutes until the temperature is
lowered, and then restart the machine.
Overheat protection starts.
The remote
control does not
work.
The distance between the machine and
the remote control is too far.
Let the remote control get close to the air
conditioning, and make sure that the remote
control directly faces to the direction of the
remote control receiver.
The remote control is not aligned with
the direction of the remote control
receiver.
Batteries are dead.
Replace batteries.
Displays 'E1'.
The room temperature sensor is
abnormal.
Check the room temperature sensor and
related circuitry.
Displays 'E2'
The pipe temperature sensor is
abnormal.
Check the pipe temperature sensor and
related circuitry.
If problems not listed in the table occur or recommended solutions do not work, please contact the
professional service organization.
Page: 16/16
VIII.Appendix
Schematic Diagram
All the technical and specific parameters,please refer to product nameplate.
Due to continuous improvement,we reserve the right to change some design without any
notice.
Recycling Notice
Your product is designed and manufactured with high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local community waste collection/recycling centre. In the European Union
there are separate collection systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
Herewith, Amiridis-Savvidis S.A. states that this product, complies with the requirements of below directives:
EMC-Directive: 14 / 30 / EU
Low Voltage Directive: 14/ 35 / EU
CE Marking: 93 / 68 / EEC
RoHS Directive: 11 / 65 / EU
ErP Directive: 09 / 125 / EC
The detailed declaration of conformity can be found at
www.fandu.gr
Exclusive importer in Greece:
Amiridis – Savvidis S.A.
87A, 17th Noemvriou str, P.C. 55534
Thessaloniki – Greece
T: +302310944944 | F: +302310944940
www.amiridis-savvidis.gr
Condenser
Compressor
Evaporator
Capillary