PDF User Manual

  1. Home
  2. Manuals
  3. Classe Audio CAV-150 Owner's Manual

Classe Audio CAV-150 Owner's Manual

Made by: Classe Audio
Type: Owner's Manual
Category: Amplifier
Pages: 15
Size: 0.45 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

CLASSÉ AUDIO

 

 

CAV-150

 

 

MULTI-CHANNEL 

POWER AMPLIFIER 

 
 
 
 
 
 
 
 
 
 
 

CAV-150

 

 

OWNER'S MANUAL 

 
 
 
 
 
 
 
 
 
 

 

 


background image

CLASSÉ DESIGN PHILOSOPHY

 

 
 

 

1. REPEATED LISTENING DESIGN SESSIONS: 

 

Fine tuning of sound by exchanging and mixing of parts (transistors, capacitors, wiring, 

PCB boards etc.), and adjusting many specific operating voltages within proper engineering 

ranges, producing an overall sonic recipe giving the most natural harmonic realism of music 

typical of instruments in a live performance. 

 

2. UPGRADABLE SINGLE CIRCUIT DESIGNS: 

 

All Classé products (all preamps and all amps) share exactly the same circuit (excluding 

moving coil and moving magnet phono circuits). This means all amplifiers and all high level 

circuits of the preamps are the same. The same circuit is tailored to different power levels etc. 

Differences between less expensive models and more expensive models are parts quality and 

compliment, power supply extravagance and the amount of filtering etc., as well as features and 

packaging. 

 

This means that for years Classé has been constantly fine tuning and upgrading this 

circuit and its application, thus reaching a very high level of understanding and musical 

achievement which benefits all models - least expensive, most expensive, preamps and 

amplifiers alike. 

 

3. EXTREME LONG LIFE IN REAL WORLD CONDITIONS: 

 

Choosing the best attainable quality parts and materials combined with the advantages of 

the two above-mentioned areas provides Classé owners with years of proven trouble free 

reliability and musical enjoyment. 

 

 

 


background image

 

 
 
 

-3-

 

 

 

 

 

 

CAV-150

 

OWNER'S MANUAL 

 

 

 

TABLE OF CONTENTS 

 

 

 

 

 

UNPACKING & SET-UP............................................................  4 

 

 

GENERAL CONNECTIONS AND OPERATIONS .................  5 

  CONNECTIONS 

AND DIAGRAMS .......................................... 8 

 

 

WARRANTY ..............................................................................  11 

 

 

SPECIFICATIONS .....................................................................  13 

 

 

WARRANTY REGISTRATION ................................................  14 

 

 

 


background image

 

 

 
 

-4-

 

UNPACKING & SET-UP

 

 
 

 

Your Classé CAV-150 multi-channel power amplifier is packed in high density, semi-rigid 

foam placed in a special cardboard box. To remove the unit, open and spread all the top flaps of the 

box and by its sides, lift out the entire unit and put it on a large flat surface. Take it out of the plastic 

bag and inspect the unit for any concealed damage. Apart from this owner's manual, please ensure 

the following have also been included: 

  1) 

Detachable 

linecord. 

 

 

2) Allen key for top plate. 

Please report any damage or missing parts to your dealer as soon as possible.  

 

Place the CAV-150 at or near its final set-up position, allowing 8 inches at the rear for 

tightening the speaker output connectors. For optimum sonic performance, we recommend the 

optional 

CLASSÉ REFERENCE A.C. LINECORD

. Consult your dealer regarding this accessory. 

 

The power transformer in the CAV-150 is located at the front-center of the unit. Ideally, a 

few feet should separate this area from components which potentially could pick up hum.  These 

include preamplifiers, turntables, and interconnect cables. In terms of providing adequate airspace 

for cooling, a good rule of thumb is to allow 6 inches above and 3 inches on each side of the unit. 

 

Check the Serial Number sticker on the back of the unit for the correct operating voltage. 

The CAV-150 has one line fuse (internal), the rating of which should be as follows: 

 

 

 

  

LINE VOLTAGE

              

FUSE RATING

      

       

  

 

 100 or 120 V.A.C.        8 AMP SLOW BLOW  125 or 250 volts 

     

 

 

 220 or 240 V.A.C.        6 AMP SLOW BLOW  250 volts 

INTERNAL RAIL FUSES:  

 

 

The CAV-150 is designed with each channel protected by one pair of internal fuses for 

positive and negative rails (see fig-1b page 8)

           8 AMP FAST BLOW  125 volts

  

 


background image

 

 

 
 

-5-

GENERAL CONNECTIONS AND OPERATION:

  

 
 

A.C. LINE: Insert the linecord into the A.C. receptacle on the rear of the unit.  

                                                   

CAUTION:  SAFETY INSTRUCTIONS

 

 

DISCONNECT AC LINE CABLE WHILE MAKING ALL CONNECTIONS. "FLOATING THE 

GROUND", OR DEFEATING THE GROUND ON A 3-PRONG LINECORD MAY CREATE 

A SHOCK HAZARD. CONNECT ALL INTERCONNECT CABLES BETWEEN THE 

ELECTRONICS BEFORE CONNECTING THE A.C. LINECORDS TO THE WALL 

OUTLETS. THIS WILL REDUCE THE POTENTIAL SHOCK HAZARD. SEE ALSO THE 

WARRANTY SECTION OF THIS OWNER'S MANUAL.  

 

 

REGULAR INPUTS: 

 

The CAV-150 is factory set for REGULAR use. Connect the regular interconnect to the 

RCA input jacks, for Channel-1 and Channel-2 make sure the Regular/Balanced switch is set to 

position marked "Regular" (down) which selects REGULAR inputs for both channels-1 and 

channel-2. (The Balanced XLR input jacks are automatically disable).    

BALANCED INPUTS: 

 

Balanced inputs are available to Channel-1 and Channel-2 only. For use with balanced 

preamplifier other than Classé, the wiring of the 3-pin XLR connectors must be matched to that of 

the Classé wiring configuration, which are as follows: 

  PIN 

1: 

Ground 

 

 

PIN 2: Positive (non-inverting) signal 

 

 

PIN 3: Negative (inverting) signal 

 

If the pin configuration of the preamplifier differs from above, the balanced interconnects 

must be modified to accommodate the different preamp. Make sure the Regular/Balanced switch is 

 


background image

 

 

 
 

-6-

set to position marked "Balanced" (up). Regardless of the type of input used, NORMAL or 

BRIDGED operation is still possible for Channel-1 and Channel-2  

NORMAL OPERATION: 

 

Input and output connectors for each channel are clearly grouped and marked on the back of 

the amplifier. (Units are preset at the factory for NORMAL.)(see fig.2&3 page 9&10) for typical 

connections of the CAV-150.  

 

Use only high quality interconnect and loudspeaker cables, and make all connections tight. If 

the input plugs are loose, remove them and pinch down the ground leaves slightly with pliers. 

Observe correct phasing of the loudspeaker connections, and tighten.   

BRIDGED OPERATION: 

 

 The six (6) channels of the CAV-150 are divided into three (3) groups. These groups can be 

operated and configured independently _ Channel-1 with Channel-2, Channel-3 with Channel-4, and 

Channel-5 with Channel-6. When in bridged mode, the inputs of CH-1, CH-3 and CH-5 are used 

respectively. The unused inputs of CH-2, CH-4 and CH-6 are automatically disconnected when 

configured in bridged mode.  The following steps should be performed to switch between 

NORMAL mode and BRIDGED mode. 

 

1) Turn OFF the unit and disconnect the AC cable. 

 

2) Reconnect all cables. Make sure the input and output connections of channels to be 

 

 

   switched are according to the operating mode. (see fig.2&3 page 9&10). 

 

3) Locate and set the mode switch to the desired operating mode (see fig.1a page 8) for  

 

  channels to be switched (up=BRIDGED, down=NORMAL) 

Please read through the previous normal section for general notes on securing good connections, and 

safety tips. 

 


background image

 

 

 
 

-7-

CAUTION: 

Please remember that the negative output connection of a bridged amplifier is NOT a 

ground.  Do not use a "common ground" or switchbox set-up.  Do not use with electronic crossovers 

which have a common ground.  

 

REMOTE CONTROL:

 (optional) 

 

With a simple connection from the receiver box to the remote jack at the back of the 

amplifier, (see Fig.1a page 8) the power amplifier can be turned ON/OFF from a distance  (or from 

another room). 

SPECIAL FEATURES: The front LED will change from Red to Green if any of the (12) internal 

rail fuses are blown. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


background image

 

 

 
 

-8-

CL

 


background image

 

 

 
 

-9-

A

 

 

 

 


background image

 

 

 
 

-10-

 

 

 


background image

 

 

 
 

-11-

CLASSÉ CAV-150 LIMITED FACTORY WARRANTY 

(North America only). 

 
 

 

Classé Audio Inc. warrants this amplifier to be free from defects in materials and 

workmanship for a period of

 FOUR YEARS

 from the date of manufacture, provided that any claim in 

virtue of this warranty be made in writing within such period.  

 

Subject to all of the conditions stated herein,

 A LIMITED FACTORY LIFETIME WARRANTY IS 

EXTENDED ONLY TO THE ORIGINAL OWNER WHO PURCHASED THE AMPLIFIER IN NORTH 

AMERICA AND WHO CLAIMS UNDER THIS WARRANTY IN NORTH AMERICA. 

 

IMPORTANT: WARRANTY REGISTRATION, AND A COPY OF THE "AUTHORIZED DEALER 

BILL OF SALE", MUST BE RECEIVED AT THE CLASSÉ FACTORY (address below) WITHIN TWENTY 

(20) DAYS OF PURCHASE, TO VALIDATE THIS WARRANTY. 

 

In the event of failure of this amplifier, resulting from defects in materials and workmanship, 

Classé Audio Inc. will repair, recalibrate, or at its discretion, replace the unit providing that all the 

conditions contained in this warranty are met. 

 

In order to initiate service of any kind, it is necessary to

 OBTAIN PRIOR FACTORY 

AUTHORIZATION, AND SHIP THE UNIT PREPAID TO THE CLASSÉ FACTORY.

  For units coming from 

outside Canada, contact the factory for our forwarding address. Units shipped directly to our 

Canadian address from outside the country will be stopped at the border, causing extensive delays or 

return of the unit to the sender. 

 

The warranty shall be void and of no effect in the event of any of the following: 

 

 

1)  Operation not in accordance with this manual. 

 

 

2)  Accident, abuse, tampering, or unauthorized 

 

 

    modification, as determined by Classé Audio Inc. 

 

 

3)  Removal, defacing, or falsifying the serial number plate. 

 

 

4)  Shipping without the complete factory packaging. 

 

 

5)  Transfer or sale of this amplifier by the original owner. 

 

 

6)  Non-compliance with any of the other conditions hereof. 

 

 

 

 


background image

 

 

 
 

-12-

 

CLASSÉ AUDIO INC. SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR 

CONSEQUENTIAL DAMAGES ARISING FROM OR RELATING TO THE SET-UP, OPERATION, 

FAILURE, TROUBLESHOOTING, OR REPAIR OF THE AMPLIFIER AND/OR ANY OTHER EQUIPMENT 

USED THEREWITH. 

 

THIS WARRANTY, ALL CLAIMS MADE IN VIRTUE HEREOF, AND ALL ISSUES RELATING TO 

ANY SUCH CLAIM SHALL BE GOVERNED BY THE LAWS OF THE PROVINCE OF QUÉBEC. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


background image

CLASSÉ CAV-150

 

MULTI-CHANNEL  

6-CHANNEL POWER AMPLIFIER 

FEATURES 

AND 

SPECIFICATIONS SHEET

 

CAV-150

 FEATURES: 

6-Channel Power amplifier 150 watts/channel. Single ended and Balanced inputs. External 

switching capability for different channel configurations. Custom Classé heat sinks, thick curved 

faceplate with sculpted one piece handles. Available in both Satin Black, and Soft Shadow Silver 

finishes. 

CAV-150

 SPECIFICATIONS: 

 

Frequency Response:   

 

 

 

20 Hz to 20 KHz +/- 0.1 dB 

 
 Sensitivity: 

     1.2 

Volt 

in 

for 

rated 

output 

 
 Input 

Impedance: 

    75 

Kohms 

(single 

ended) 

        16 

Kohms 

(balanced) 

 Output 

Impedance: 

    0.05 

Ohm 

 
 

Gain:   

 

 

 

 

 

29 dB 

 
 S/N 

Ratio: 

     More 

than 

135 

dB 

 
 THD+N: 

     0.004% 

 

Maximum power and  

 Channel 

configuration 

    With 

Ohms 

load 

 
  Six 

(6) 

Channels 

   150 

Watts 

 

 

Five (5) Channels 

 

 

 

300 Watts x 1 (bridged) 

        150 

Watts 

 

 

Four (4) Channels 

 

 

 

300 Watts x 2 (bridged) 

        150 

Watts 

 

 

Three (3) Channels 

 

 

 

300 Watts x 3 (bridged) 

 Power 

Consumption 

(idle): 

   225 

Watts 

 
 Dimensions: 

Gross: 

    14" 

25 

1/2" 

25" 

   Net: 

    6 

3/4" 

19" 

21 

1/2" 

 Weight: Gross: 

    75 

lbs. 

 

 

 

Net: 

 

 

 

 

70 lbs. 

 

 


background image

 

 

 
 

-14-

WARRANTY REGISTRATION

 

 
 
 

You must fill out and return the form below, along with a copy of the authorized dealer 

bill of sale, to the factory within twenty (20) days of purchase. This will allow us to provide 

expedient service, information regarding updates and new products, and validate the Classé 

warranty. 

 

 

CAV-150

 SERIAL NUMBER____________________________________________________ 

PURCHASE DATE____________________________________________________________  

AUTHORIZED DEALER________________________________________________________ 

PURCHASER'S NAME_________________________________________________________ 

STREET ADDRESS____________________________________________________________ 

CITY________________________________STATE/PROV.____________________________ 

COUNTRY________________________ZIP/POSTAL CODE__________________________ 

I BECAME AWARE OF THIS PRODUCT BY:_____________________________________ 

 (DEALER, MAGAZINE, FRIEND, ETC.) 

 

 

 

              SEND TO:   CLASSÉ AUDIO INC. 

 

 

                      Product Registration 

 

 

                      5070 François Cusson 

 

 

                      Lachine, Quebec, Canada 

 

 

                      H8T 1B3 

 

 

 

 

 

 

 


background image

 

 

 
 

-15-

 

 

 

 
 
 
 

 

Notice to all Classé Product owners:

 

 
Thank you for your purchase of a Classé Audio 
component.   
 
All of us at Classé have taken extreme care to ensure 
that your purchase will become a prized investment.  We 
are proud to inform you that all Classé Audio 
components have been officially approved for the 
European Community CE mark.   
This means that your Classé product has been subjected 
to the most rigorous manufacturing and safety tests in 
the world, and have proven to meet or exceed all 
European Community CE requirements for unit to unit 
consistency and consumer safety.  
 
All of us at Classé Audio wish you many years of 
musical enjoyment. 
 

As of July 18, 1996, Classé Audio has been granted  
Certificate No:  C401CLA1.MGS, which indicates CE  
approval for all models of the Classé Audio product 
line.