PDF User Manual

  1. Home
  2. Manuals
  3. Casio Forester FT500WV-5BV User Manual

Casio Forester FT500WV-5BV User Manual

Made by: Casio
Type: User Guide
Category: Watch
Pages: 1
Size: 0.43 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

USER’S GUIDE ANALOG

● To set time

1) Pull the crown out when the second hand at 12 o’clock position

and the second hand stops.

2) Set the hands by turning the crown.
3) In accordance with a time signal, push the crown in.

Crown

50

40

30

20

10

Elapsed
time bezel

● For watch with the elapsed time bezel

Rotate the elapsed time bezel to align the 

 mark with the

minute hand.
After certain amount of time elapsed, read the graduation on the
elapsed time bezel which the minute hand points to.
The elapsed time is indicated.

● For watch with a backlight

About the backlight

 Hold down 

L

 to illuminate the face of the watch.

 With Modules 1319 and 2312, pressing 

L

 illuminates the

display for about two or three seconds.

 With Modules 2342 and 2343, pressing 

L

 illuminates the

display for about one second.

 The backlight of this watch employs an electroluminescent (EL)

light, which loses its illuminating power after very long term use.

 Frequent use of the backlight shortens the battery life.

 Leaving the backlight on for a long time or turning on the

backlight while battery power is low can cause the hands of the
watch to stop momentarily.

● For watch with a screwlock crown

About the screwlock crown

 Some water resistant models are equipped with a screwlock

crown.

 With such models, you must unscrew the crown in the direction

noted in the illustration to loosen it before you can pull it out. Do
not pull too forcibly on such crowns.

 Also note that such watches are not water resistant while their

crowns are loosened. Be sure to screw the crowns back in as
far as they will go after making any setting.

For watch with a screwlock crown

To Set Time

1)  Pull the crown out when the second click when the second

hand is at the 12 o’clock position and the second hand stops.

2)  Turn the hands clockwise and put the watch four or five

minutes forward. Then back them out .

3)  Push the crown in to the normal position on a time signal.

To Set Day-date

1)  Pull the crown out to the first click.
2)  Set the hands by turning the crown clockwise.

Set the date by turning the crown counterclockwise.
Check whether the day is English or Spanish.

3)  Push the crown in to the nomal position.
     Note:Avoid setting the day-date between 10:00 p.m. and 6:30 a.m.

        (the day-date display may not change in the following day).

For watch with a date display

To Set Time

1)  Pull the crown out to the second click when the second   hand

is at the 12 o’clock position and the second hand stops.

2)  Turn the hands clockwise and put the watch four or five

minutes forward. Then back them out .

3)  In accordance with a time signal, push the crown in.

To Set Date

1)  Pull the crown out to the first click.
2)  Set the day by turning the crown clockwise.
3)  Push the crown in to the nomal position.

Crown

Crown and
L (Light button)

Crown

30

30

SUN

L (Light button)

Crown (Normal position)

First click
 (Setting date)

Second click
 (Setting time)

Crown (Normal position)

First click
 (Setting day-date)

Second click
 (Setting time)

The configuration of your watch may differ
somewhat from that shown in the illustration

The configuration of your watch
may differ somewhat from that
shown in the illustration

[Day display]

SUN

MON

TUE

WED

THU

FRI

SAT

DOM

LUN

MAR

MIE
JUE
VIE

SAB

Spanish

English