PDF User Manual

  1. Home
  2. Manuals
  3. Allflex AFX-110 User Manual

Allflex AFX-110 User Manual

Made by: Allflex
Type: User Manual
Category: Card Reader
Pages: 20
Size: 1.45 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

Rev 1.0 

 

 

 

 

 
 

Allflex AFX-110 Reader 

Reads 134.2 kHz, 128 kHz,and 125 kHz Microchips 

ISO compatible 

 

 

 

 

 

 

 

 

 

 

 

USER 
MANUAL 

 

 


background image

 

 

Table of Contents 

 

1

 

Description ..................................................................................................................................... 3

 

2

 

Case and Components .............................................................................................................. 3

 

3

 

Operation and settings ............................................................................................................... 4

 

3.1

 

Getting Started ............................................................................................................................. 4

 

3.2

 

Battery handling instructions ...................................................................................................... 4

 

3.3

 

Power on / off instructions .......................................................................................................... 5

 

3.4

 

Reading an implanted microchip ............................................................................................ 5

 

3.5

 

Tones ............................................................................................................................................... 6

 

3.6

 

Vibrations ....................................................................................................................................... 6

 

3.7

 

Date/Time ...................................................................................................................................... 7

 

4

 

Installing Software ........................................................................................................................ 7

 

4.1

 

System requirements ................................................................................................................... 7

 

4.2

 

Program installation ..................................................................................................................... 7

 

5

 

Connecting to a PC .................................................................................................................... 9

 

5.1

 

Using USB interface ...................................................................................................................... 9

 

5.2

 

Using wireless Bluetooth

®

 connection ....................................................................................10

 

6

 

Memory ........................................................................................................................................13

 

6.1

 

Memory management .............................................................................................................13

 

6.2

 

Download Memory ....................................................................................................................13

 

6.3

 

Temperature measurement .....................................................................................................13

 

7

 

Connecting the reader to an Application on smart phone or on Mobile Device .......14

 

7.1

 

Pairing with iPhone®/iPad® devices ......................................................................................14

 

7.2

 

Pairing with Android™ devices

 ...............................................................................................14

 

8

 

Appendix .....................................................................................................................................15

 

8.1

 

NET Framework 3.5 installation .................................................................................................15

 

9

 

TROUBLESHOOTING ....................................................................................................................17

 

10

 

Specifications ..............................................................................................................................18

 

11

 

Limited Product Warranty .........................................................................................................18

 

12

 

Regulatory information .............................................................................................................19

 

12.1

 

USA-Federal Communications Commission (FCC) ..............................................................19

 

12.2

 

Canada 

 Industry Canada (IC) .............................................................................................19

 

12.3

 

Miscellaneous information .......................................................................................................20

 

12.4

 

Trademarks ..................................................................................................................................20

 

12.5

 

Apple - Legal Notice .................................................................................................................20

 

13

 

Regulatory Compliance ...........................................................................................................20

 

 

 

SET

TING

 UP

 

TRANS

M

ITTIN

D

ATA

 

TO 

C

OM

PUT

ER

 

AD

V

ANCED

 OP

ERATI

O

NS

 

 


background image

 

1

 

Description 

AFX-110 is a universal portable reader for RFID microchips with the purpose of identifying animals.  

The device can read a wide range of technologies: FDX-B ISO, HDX ISO, FDX-A (FECAVA), Trovan and Avid 
Encrypted.  AFX-110 can also read and display the Microchip Temperature when reading microchips with 
temperature sensing implants from Allflex or Destron Fearing.  

In addition to its microchip reading functions, the AFX-110 scanner can store up to 3000 IDs, each associated 
with a time/date stamp in its internal memory and transmit them to a personal computer via an USB cable 
or wirelessly using Bluetooth

®

2

 

Case and Components 

Figure 1 

 Packing 

 

Table 1 

 Packing list 

Item 

Features 

Description 

Plastic case 

Use  to  transport  the  reader  in  a 
robust case 

Rechargeable 

NiMH 

battery 

Supplies the reader. 

US plug 

Plug for wall adapter (5) 

Wall adapter 

Powers  the  reader  and  charges 
batteries. 

USB Cable 

Conveys  data  to  and  from 
reader. 

Reader 

Lanyard 

Notice 

Quick start guide 

 

Figure 2 - Reader features and user interface. 

 

 

Table 2 

 Reader features and description of use 

Item 

Feature 

Description of use 

Antenna 

Emits  activation  signal  and  receives 
RFID microchip signal. 

Graphical readout 
with backlight 

Displays  information  about  current 
reader status. 

“SCAN” button

 

Applies power and causes activation 
signal  to  be  emitted  for  reading 
microchips 

POWER connector 

Electrical interface for charging. 

USB connector 

Electrical interface for USB cable. 

“MENU” button

 

Applies  power  and  access  menu  to 
change reader settings 

Eyelet 

Eyelet to place the lanyard 

Battery door screw 

Screw on batteries cover 

Battery cover 

Cover to access batteries 

10 

Bluetooth® 
(internal) 

Wireless  interface  to  communicate 
data  to  and  from  reader  (not 
pictured) 

11 

Audible beeper 

Beeper to identify the different reader 
functionalities 

12 

Vibration mode 

Vibration 

systems 

to 

indicate 

readings. 

 

 

 

 

 

 

1
2

3

4
5

7

6

9
8

10,11 & 12

1

 

2

 

4

 

5

 

6

 

8

 

7

 

9

 

 


background image

 

3

 

Operation and settings 

3.1

 

Getting Started 

AFX-110 comes supplied with six AAA 

rechargeable NiMH battery pack

 (7.2 V / 750mAh) which must 

be 

fully charged prior to use

, as diagram below (step 1 through 5). 

 

1

 

Remove  retention  screw  located  on  center  of 
back of the reader. 

 

 

 

 

 

2

 

Connect the battery pack to the connector.  

 

 

 

 

 

3

 

Replace lid and screw. 

 

 

 

 

 

4

 

Attach the power cord in the reader. 

Plug  the  adaptor  into  power outlet.  The  battery  level  icon 
will flash while 
charging and stop flashing when fully charged. A full charge 
may take 3.5 hours. 

 

 

3.2

 

Battery handling instructions 

Please read and follow the handling instructions for the battery before use. Improper use of the battery 
may cause heat, fire, rupture, damage or capacity deterioration of the battery. 

 

Caution

 

 

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES 
ACCORDING TO THE INSTRUCTIONS. 

 

Warning 

 Use rechargeable batteries with the same capacity. 
 Do not use this reader near water when connected to the AC/DC adapter. 

 

Do not install near any heat sources such as radiators, heat registers,  stoves, or other apparatus 
that produce heat. 

 

Do not charge the battery pack from AC main sources during electrical storms or when unused for 
long periods of time. 
The batteries must be charged indoors only, at temperature between 0° and +35°C. 
For best battery performance, charge unit at least every three months, if reader is unused. 

 

Notice 

 

Use the adapter (AC Input: 100-240V, 50/60Hz, 0.4A; DC Output: 12.0V, 0.58A) provided with the 
reader to charge the batteries. 

 


background image

 

3.3

 

Power on / off instructions 

To turn the AFX-110 on, press and release one button once. During this start up time the reader will 
display the screen below and beep once. 

 

 

Note 1

 - Once activated, the reader will stay on for 2 minutes by default. 

3.4

 

Reading an implanted microchip 

3.4.1

 

Scanning and locating an implanted microchip 

When searching implantable microchips, place the reader so it touches the animal. 

Use the following scanning patterns to locate the microchip. Perform pattern 1 and 2 on Left, Top and 
Right sides of animal

’s

 neck and shoulders, as microchip placement might vary per animal. 

For Pets 

For other species 

Keep scanner touching animal and scan slowly following 
patterns below: 
 

 

Keep  scanner  touching  animal  over 
standard location for particular species. 

 

While pressing the SCANNING button, the reader  will display the screen below, until a microchip is 
found or until a 20-second elapse after the button release. 

 

If a microchip is not detected, the reader will 

display “ID not found”. In that case, we recommend re

-

scanning the test chip to ensure reader is operating properly. The animal, then should be re-scanned, 
moving slower and in varying angle according to the patterns described above. 

 

The following pictures show the result of a successful reading session: 

 

 

Note 2

 

 If a microchip was found and the reader is connected via its USB interface or its Bluetooth

®

 

interface to a host computer, it will send the microchip number to the host computer. 

Allflex AFX-110

10:49AM

12/19/2017

scanning

menu

10:49AM

982000351249512

10:49AM

 FDX-B

ID not found

982000351249512

10:49AM

 FDX-B

 


background image

 

3.4.2

 

Read range performances 

The figure below (Figure 3) illustrates the reading zone of the reader, within which microchips can be 
successfully read. Optimum read distance occurs depending upon the orientation of the microchip. 
Microchips are best detected when positioned as shown below. 

Figure 3

 - Optimum Read Distance Microchip Orientation (position 1, 2, 3 and 4) 

 

Typical read distances will vary when reading different types of microchips 

3.5

 

Tones 

The scanner displays the icon 

 when the beeper is enabled. To activate the option, enable it in 

the menu “general settings”

 

 

The  scanner  has  distinct  beep  tones  for  different  functions:  after  starting-up,  when  scan  button  is 
pushed, when scan button is released, when microchip is found, or during low battery condition. 

3.6

 

Vibrations 

The scanner displays the icon 

 when the vibration mode is enabled. To activate the option, enable 

it in the menu “general settings”

 

 

 

 

1

2

3

4

Date/Time
Language
Buttons
Load defaults

General settings

>

>
>
>

<< Back

Vibration
Buzzer
Temperature

Date/Time
Language
Buttons
Load defaults

General settings

>

>
>
>

<< Back

Vibration
Buzzer
Temperature

 


background image

 

3.7

 

Date/Time 

The scanner provides a Time Stamping Function that inserts the date and the time for each ID number 
into the list of ID numbers stored.  

The user can configure the date/time format, the date and the time through the menu or through 
communication interface (USB or Bluetooth® port). 

 

 

4

 

Installing Software 

The  AFX-110 is supplied  with the  AFX-100/AFX-110 Software.  AFX-100/AFX-110 Software provides the 
following capabilities: 

 

Change reader settings. 

 

Configure a Bluetooth

® 

connection with a remote device. 

 

Download reader memory and export animal ID’s to Excel.

 

 

Use your reader as a virtual keyboard. 

 

Update your reader firmware. 

4.1

 

System requirements 

 

Microsoft

® 

Windows

® 

2000 Service Pack 4, Windows XP, Windows Vista, Windows 7, Windows 8, 

Windows 8.1, and Windows 10 (This software is not compatible with Mac OS). 

 

Personal computer with: 

 

512 MB of RAM minimum. 

 

40 MB free hard disk space. 

 

AFX-100/AFX-110 Software requires .NET Framework 3.5 which is usually installed with Windows 
operating system. If it is not installed on your computer, the installation program will prompt you 
to install it (Refer to Appendix to see how to install .NET framework). 

4.2

 

Program installation 

The AFX-100/AFX-110 Software (AFX-100/AFX-110 Software) is available for download at  

Follow the steps below to complete the installation process: 

1.

 

Double-click on the setup package to start the installation and choose the appropriate 
language. 

 

 

Set date/time

Date (mm/dd/yyyy):

12

 / 19 / 2017

Time (hh:mm):
18:38

Date/Time
Language
Buttons
Load defaults

General settings

>

>
>
>

<< Back

Vibration
Buzzer
Temperature

Date format

<< Back

dd/mm/yyyy

}

 mm/dd/yyyy

yyyy-mm-dd

Date/Time

>
>

<< Back

Set date/time
Date format

 


background image

 

2.

 

Then, follow the different steps: 

 

 

 

 

 

 

 


background image

 

The  USB  drivers  will  then  be  installed.  Then,  c

heck  “Always  trust  software…”  and  click  on  Install 

button. Click on Finish at the end of the process to close the installation. 

 

 

5

 

Connecting to a PC 

5.1

 

Using USB interface 

 

Open the  AFX-100/AFX-110 Software and connect the reader to a 
PC with the USB 
cable by removing the USB port cover and attaching the cable to 
the AFX-110 connector. Install the USB cable by attaching it to AFX-
110. 

 

 

 

 

Plug  the  other  extremity  of  the  USB  cable  into  a  USB  port  on  your 
computer.  When  reader  is  connected,  Windows  will  automatically 
find the driver and install the reader properly. 

 

 

 

 

The reader vibrates (if vibration mode enabled) and an USB icon is 
displayed on screen 

 

 

Note  3

 

 Once the USB  cable is connected, the reader is automatically powered on and it will 

remain activated until the cable is disconnected. The reader will be able to read a  microchip if 
sufficiently charged batteries are inserted. With depleted batteries, the reader will not be able to 
read a microchip, but will remain on with other functions fully active. 

 

 

 

Note 4

: If a microchip was detected and the reader is connected via its USB interface or its 

Bluetooth® interface to a host computer, it will send the microchip number to the host computer.

 

 

 

 

Allflex AFX-110

10:49AM

12/19/2017

 


background image

 

 

10 

5.2

 

Using wireless Bluetooth

®

 connection 

5.2.1

 

BLUETOOTH® management 

The AFX-110 is equipped with a Class 2

1

 Bluetooth® module to communicate. This device is compliant 

with the Bluetooth® Serial Port Profile (SPP). 

Enable  the  Bluetooth®  feature  by  using  the  “

AFX-100/AFX-110  Software

  or  by  using  the  menu 

“Bluetooth settings”.

 

 

Bluetooth® works on a premise that one end of the communication will be paired to the other one. A 
host initiates communications and looks for other devices to connect. Smart phones and computers 
usually establish the connection with readers which are connectable and discoverable.  

 

Note 5

 

 Understanding the Bluetooth

®

 icon: 

Disabled 

Connectable mode 

Host mode 

No icon 

Blinking 

 

Fixed 

 

Blinking 

 

Fixed 

 

 

Not connected 

Connected 

Not connected 

Connected 

 

 

 

 

Note  6

 

  A  single  beep  is  emitted  with  a  visual  message  when  the  Bluetooth

®

  connection  is 

established. Three beeps are emitted with a visual message when the disconnection occurs. 

 

 

 

 

Note 7

 

 If you are using a Smartphone, an application is required (not supplied).

 

 

5.2.2

 

Pairing from AFX-100/AFX-110 Software 

AFX-100/AFX-110 Software is able to search for Bluetooth devices in the vicinity and pair to 
one of them. The target here is to find your reader and to connect it to your computer by 
Bluetooth. 

NOTE: 

Before continuing, make sure the Bluetooth is enabled on your reader. 

 

1.

 

Click on “Connect” menu and select “Connect Bluetooth Reader…”

 

 

 

                                                      

1 Operating distance of communication is around 15 m (49 ft). 

About Bluetooth

Bluetooth settings

>

>

<< Back

On/Off
Select device
Authentication

M

M

982000351249512

10:49AM

 FDX-B

Bluetooth connected!

 


background image

 

 

11 

2.

 

Power-

on your reader and click on “Search for devices”:

 

 

 

3.

 

Your reader should appear in the list. Click on “Pair device” to start

 the pairing with the 

reader. 

Make sure your reader is still on. 

 

4.

 

By default, the pairing code is 1234. Click OK to continue the pairing. At this moment, 
Windows will install the driver to create a virtual COM port. 
 

 

 

5.

 

Once Windows installed the driver, the COM port number appears in the Port column. 

You can now click on “Connect Reader” button to connect your reader using Bluetooth.

 

 

NOTE: 

If  the  reader  name  is  not  displayed,  as  shown  in  the  following  picture,  devices  can  be 
searched again and should now display the name. 

 

 

 

 


background image

 

 

12 

5.2.3

 

Using Bluetooth® interface to pair, from Windows 

Alternately, you can pair the reader using Windows Control Panel.  

Find below the instructions for pairing with Windows 7: 

Open Windows’ Con

trol 

Panel 

 

In “Hardware and Sound” 
section,  select  “Add  a 
device”

 

 

Switch-on the reader 
and wait until the reader 
appears in the device list 
as following: 

 

Select the appropriate 
reader and click with 
right button 

NOTE

: Your reader may appear as a Bluetooth headset.  

Windows will now install 
the driver needed as 
following: 

 

Your reader is now ready to connect. 

 

 

5.2.4

 

Connect by Bluetooth

® 

when the reader is already paired 

When  your  reader  has  already  been  paired  to  your  computer,  go  to  “Connect  menu”,  select 
“Bluetooth link”

 and click on the appropriate COM port: 

 

 

 

“Bluetooth 

Peripheral 

Device” 

is 

service 

dedicated 

to 

Apple’s 

devices  and  is  unknown 

from  Windows’  operating 

system that the reason why 

the PC mentions “no driver 
found”.

 

 


background image

 

 

13 

6

 

Memory 

6.1

 

Memory management 

The AFX-110 can store up to 

3000 IDs

, each associated with a time/date stamp, in its internal memory 

and transmit them to a personal computer via an USB cable or wirelessly using Bluetooth

®

6.2

 

Download Memory 

1.

 

When memory feature is enabled, the animal identification codes can be downloaded 
from reader. 

2.

 

Click on “Read Memory” button to download the memory from the reader.

 

3.

 

Export the ID code list to Excel by cl

icking on “Export to Excel” button.

 

4.

 

Once finished, you can click on “Clear memory” to erase animal identification codes 

stored in the reader. 

 

6.3

 

Temperature measurement 

The  AFX-110  can  read  and  display  the 

Microchip  Temperature

  when  reading  microchips  with 

temperature sensing

2

 implants from Allflex or Destron Fearing. 

The Microchip Temperature is displayed above the microchip number as shown in picture below. 

 

To activate the option

, enable it in the menu “general

 

settings”

 

 

 

                                                      

2

 

Microchip Temperature™ range is from 33ºC (91.4ºF) to 43ºC (109.4ºF). If the temperature is below or above this range, it wil

l display 

“TEMP BELOW RANGE” OR “TEMP ABOVE RANGE”.

 

982000351249512

10:49AM

 FDX-B

38.3°C

Date/Time
Language
Buttons
Load defaults

General settings

>

>
>
>

<< Back

Vibration
Buzzer
Temperature

 


background image

 

 

14 

7

 

Connecting the reader to an Application on smart phone 
or on Mobile Device 

For advanced and technical application development, the AFX-110 was designed with the capability 
to connect to iPhone, iPad and Android through wireless Bluetooth

® 

connection. The current AFX-110 

package does not include software or application for this feature. 

7.1

 

Pairing with iPhone®/iPad® devices 

 

 

 

7.2

 

Pairing with An

droid™ devices

 

 

 

Make sure your reader is on and tap on AFX-110 

Paired 

 

 

 

                                                      

3  Once  paired  to  the  iPhone,  your  reader  will  automatically  switch  into  master  mode  to  be  able  the  reconnect  to  the  iPhone 

automatically the next time. 

 

 

Make sure your reader is on and tap on AFX-110 

Paired

3

 

 


background image

 

 

15 

8

 

Appendix 

8.1

 

NET Framework 3.5 installation 

AFX-100/AFX-110 Software requires .NET Framework 3.5 to be installed on the machine. 

If the fo

llowing message is displayed while running the setup package, click “Yes” and follow the .NET 

Framework 3.5 installation instructions. This message may vary depending on your Operating System. 

 

NOTE:

 The .NET Framework installation requires an internet connection. 

1.

 

After clicking on “Yes”, your internet browser will be opened with the following page. Click on 
“Download” button to continue.

 

 

2.

 

Uncheck  unnecessary  downloads  (Download  summary  should  only  contain  Microsoft  .NET 

Framework 3.5) and click on “No thanks and continue”:

 

16 

 

3.

 

Click Save on the bottom of the page to start .NET Framework installation. 

 

4.

 

Click Run on the bottom of the page to start .NET Framework installation. 

 

5.

 

Then, click on “Download and install this feature”.

 

 

 


background image

 

 

16 

6.

 

At this step, the .NET Framework 3.5 installation program will download the required files from 
internet and then install the framework. This message will appear. It is now safe to close browser. 

 

 

 

 


background image

 

 

17 

9

 

TROUBLESHOOTING 

 

MICROCHIP NOT DETECTED: 

 

Verify that AFX-110 is able to read microchip. 

 

Confirm  that  scanning  is  being  performed  away  from  metal  objects  and  computer 
equipment, including metal collars and metal tags and away from stainless steel table. 

 

Scan animal following patterns on page 7, with slow movements and reader touching 
animal all the time. If the animal moves too quickly, the microchip may not be located 
in the reading zone long enough for the ID code information to be obtained. 

 

Replace batteries if power is weak, as it might not be sufficient to activate the field and 
reading distances can be reduced. 

 

Some animals might be implanted with two microchips too close to each other. In these 
cases, there is a risk that reader performance might be affected. Continue to scan as 
indicated on page 7, with slow movements, trying to identify one microchip at a time. 

 

MICROCHIP IS FOUND BUT NOT STORED IN MEMORY. 

 

Verify scanner reads microchip 

 

MICROCHIP IS FOUND BUT DOES NOT DISPLAY TEMPERATURE4 

 

Verify Microchip is a temperature sensing implant from ALLFLEX or DESTRON FEARING 

 

Verify Temperature Scanning is enabled (see chapter 6.3). 

 

READER DOES NOT START 

 

Verify batteries have been installed correctly and have full charge. 

 

LOW BATTERIES 

 

If reader display

s “Low battery”

Recharge the batteries 

 

DEPLETED BATTERIES 

 

If reader displays “Battery 

depleted

Recharge the batteries

 

 

BLUETOOTH NOT VISIBLE:  

 

Check  Bluetooth  icon  appears  on  the  reader.  If  not,  enable  Bluetooth  using  AFX-
100/AFX-110 Software 

or menu “Bluetooth settings”.

 

 

BLUETOOTH VISIBLE BUT NOT CONNECTABLE: 

 

Make sure your reader is configured to be visible and connectable in AFX-100/AFX-110 
Software (Refer to AFX-100/AFX-110 Software User Guide for more information) 

 

INCORRECT DATE / TIME 

 

Connect the reader to AFX-100/AFX-110 Software, this will synchronize automatically the 
date and time with the computer. 

 

 

                                                      

4 only with microchips dedicated to temperature measurement 

 


background image

 

 

18 

10

 

Specifications 

General 

 

Norms 

ISO 11784 and ISO 11785 for HDX, FDX-B, FDX-A (FECAVA), Trovan and Avid 
Encrypted microchips and implants 

Special feature: 

Temperature  scanning  with  TS  and  BT  implants  between  33°C  and  43°C 
(between 91.4°F and 109.4°F) 

User interface 

Graphical display: 122 x 32 dots - visual area: 56 x 12.7 mm 
2 buttons 
1 buzzer 
1 vibration mode 
USB port and Bluetooth® module 

USB interface 

CDC class (Serial emulation) and HID class 

Bluetooth® interface 

Class 2(up to 15m) 
Serial Port Profile (SPP) 

Memory 

3000 IDs 

Batteries 

6 NiMH rechargeable battery pack (7.2 V / 750mAh) 

Date/Time autonomy 

2 months without reader usage @ 20°C 

Battery charge duration 

Up to 3h30 in fast charge (external power supply) 
Up to 9h00 in slow charge (computer) 

Reading distances 

Up  to  10  cm  (3.9  in)  depending  on  microchip  type  and  microchip 
orientation. 

 

 

Mechanical and physicals 

 

Dimensions 

280 x 83 x 55 mm (11 x 3.3 x 2.2 in) 

Weight 

275 g (including batteries) (9.7 oz) 

Operating Temperature 

-10° to +40°C (+32° to +122°F) 

Storage Temperature 

-20° to +65°C (-4° to +149°F) 

Humidity 

80% Non-Condensing 

 

 

Default settings 

 

ID code format: 

15 digits 

Temperature scanning 

Enabled 

Timestamp 

Enabled 

Bluetooth® 

Enabled 

Bluetooth® pin code 

1234 

Beeper 

Enabled 

Vibrator 

Enabled 

 

11

 

Limited Product Warranty 

Manufacturer guarantees this product against all defects due to faulty materials or workmanship for 
a period of one year following the date of purchase. The warranty does not apply to any damage 
resulting from an accident, misuse, modification or an application other than that described in this 
manual and for which the device was designed. 
If the product develops a malfunction during the warranty period, manufacturer will repair or replace 
it free of charge. The cost of shipment is at the customer's expense, whereas return shipment is paid 
by manufacturer.  
Refer  all  servicing  to  qualified  service  personnel.  Servicing  is  required  when  the  reader  has  been 
damaged  in  any  way,  such  as  power-supply  cord  or  plug  is  damaged,  liquid  has  been  spilled  or 
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped. 

 


background image

 

 

19 

12

 

Regulatory information 

12.1

 

USA-Federal Communications Commission (FCC) 

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may 
not  cause  interference,  and  (2)  this  device  must  accept  any  interference,  including  interference  that  may  cause 
undesired operation of the device. 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful  interference  in  a  residential 
installation.  This  equipment  generates,  uses,  and  can  radiate  radio  frequency  energy.  If  not  installed  and  used  in 
accordance  with  the  instructions,  it  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no 
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to 
try and correct the interference by one or more of the following measures:  

 

Reorient or relocate the receiving antenna. 

 

Increase the distance between the equipment and the receiver. 

 

Connect the equipment to outlet on a circuit different from that to which the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 
 

This  portable  equipment  with  its  antenna  complies  with  FCC’s  radiation  exposure  limits  set  forth  for  an  uncontrolled 

environment. To maintain compliance, follow the instructions below:  

(1)

 

This transmitter must not be co-located or operating with any other antenna or transmitter;  

(2)

 

Avoid direct contact to the antenna, or keep contact to a minimum while using this equipment. 

Notice to consumers: 
Any  changes  or  modifications  not  expressly  approv

ed  by  the  party  responsible  for  compliance  could  void  the  user’s 

authority to operate the equipment. 

12.2

 

Canada 

 Industry Canada (IC) 

This device complies with Industry Canada’s license

-exempt RSSs. Operation is subject to the following two conditions:  

(1)

 

This device may not cause interference, and  

(2)

 

This device must accept any interference received, including interference that may cause undesired operation 
of the device. 

Le  présent  appareil  est  conforme  aux  CNR  d’Industrie  Canada  applicables  aux  appareils  radio  exempts  de  licence.  
L’exploitation est autorisée aux deux conditions 

suivantes :  

(1)

 

L’appareil ne d

oit pas produire de brouillage ; 

(2)

 

L’utilisateur

 

de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est 

susceptible d’en compromettre le fonctionnement.

 

 

This portable equipment with it

s antenna complies with RSS102’s radiation exposure limits se

t forth for an uncontrolled 

environment. To maintain compliance, follow the instructions below : 

(3)

 

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 

(4)

 

Avoid direct contact to the antenna, or keep contact to a minimum while using this equipment. 

Cet équipement portable 

avec ses antennes est conforme aux limites d’expositions de la CNR102 applicables pour un 

environnement non contrôlé. Pour maintenir la conformité suivez les instructions ci-dessous : 

(3)

 

Cet émetteur ne doit pas être co-localisé ou opérer en conjonction avec toute autre antenne ou émetteur. 

(4)

 

Évitez tout contact direct avec l'antenne ou gardez le contact au minimum pendant l'utilisation de cet 
équipement. 

 

 

 

 


background image

 

 

20 

 

12.3

 

Miscellaneous information 

Snapshots are according to the latest version at the moment this document was printed.  
Changes may occur without notice. 

12.4

 

Trademarks 

Bluetooth® is a registered trademark of Bluetooth SIG, Inc. 
Windows is a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries. 
All other trademarks are trademarks of their respective owners. 

12.5

 

Apple - Legal Notice 

iPhone, iPad are a trademark of Apple Inc., registered in the U.S. and other countries. 
 

“Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been de

signed to connect specifically 

to iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. 
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. 
Please note that the use of this accessory with iPhone or iPad may affect wireless performance. 

 

13

 

Regulatory Compliance 

ISO 11784 & 11785 

This  device  complies  with  the  standards  set  forward  by  the  International  Standardization  Organization.  Specifically, with 
standards: 

11784: Radio frequency identification of animals -- Code Structure 

11785: Radio frequency identification of animals -- Technical Concept. 

FCC NQY-30018 

 

IC 4246A-30018 

 

CE Marking