PDF User Manual

  1. Home
  2. Manuals
  3. Airpho AR-E200 Installation Manual

Airpho AR-E200 Installation Manual

Made by: Airpho
Type: Installation Guide
Category: Extender
Pages: 2
Size: 1.17 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

LED Explanations

Status

On 

Blinking

Off 

Color

Indication

Green

Red 

Red

The Extender is connected to the 
router, and is in good location.

There is no active connection.

WPS connection is in progress. 

The Extender is off.

Wait about 1 minute 
until the LED is lit in 
solid red.

– –

Quick Setup Using the WPS Button

METHOD ONE

Power on the Extender

Plug the Extender into an electrical outlet next to your router. 

1

Relocate the extender

1.Plug in the Extender into an electrical outlet halfway 

between  your  router  and  the  Wi-Fi  dead  zone.  You 

need  to  make  sure  the  location  you  choose  is  within 

the range of your host network.

2.Wait  about  1  minute  until  the  LED  is  lit  and  solid 

green. If not, relocate it closer to the router to achieve 

better signal quality.

Host Network

AR-E200

Extended Network

WPS

3

1. Press the WPS button on your router.

2.Press the WPS button on your Extender within 1 minute.

Connect to the Extender’s network

2

The  LED  should  turn  from 
blinking  red  to  solid  green, 
indicating a successful WPS 
connection. If not, please try 
METHOD TWO.

Airpho Technology Co.,Ltd

Web: www.airpho.com

Quick 
Installation Guide

300Mbps Wi-Fi Range Extender

AR-E200

 


background image

METHOD TWO

Power on the Extender

Plug the Extender into an electrical outlet next to your 
router. 

Wait until the LED 
change to solid red. 

1

2

Configure the Range Extender

www.airphoextender.net

1.Launch a web browser and enter www.airphoexten
der.net in the address field. You will be guided to the 
Extender Setup Page.

2.Select  your  router’s  2.4GHz  network  to  extend  and 
enter its wireless password ,then click 

Confirm

.

Extender|AR-E200

Select a host network

Advanced Settings>>>

AR-W200

00:05:1d:03:04:05

Host_Network

4c:6e:6e:00:39:b6

2c:b2:1a:ca:be:cd

AR-W400

AR-W410

4e:6e:6e:5c:10:b0

3

5.  Check  the  LED  status  on  your  extender.  The  LED 
should  turn  solid  green,  indicating  a  successful 
connection; if not, please refer to FAQs on Airpho official 
website: www.airpho.com

Extender|AR-E200

Connecting 80%

Extender SSID: Host_Network_ext

Cancel

3. Set the network name (SSID) and password for your 
extender.  You  may  either  keep  the  default  SSID,  or 
customize  it  for  the  extended  2.4GHz  network,  then 
click 

.

Confirm

4. Verify your wireless settings and click 

. It will take 

Confirm

about 15 seconds to proceed.

Setup your extender SSID

Host_Network_ext

We recommend setting your extender SSID

same as your router to create seamless home

networking

Cancel

Confirm

Extender|AR-E200

Select a host network

Advanced Settings>>>

INTELBRAS

00:05:1d:03:04:05

Host_Network

4c:6e:6e:00:39:b6

2c:b2:1a:ca:be:cd

PHICOMM_666

AR-V400

4e:6e:6e:5c:10:b0

Host_Network

Signal:Strong

Enter your password

Enter your password

Cancel

Confirm

Solid green

The extender is connected 

to the router. Now you can 

access the network.

Solid red

The extender has a problem 

connecting to the router. 

Please try relocating the 

extender until the green light 

is on.

LED Status Explanation:

AIRPHO_xxxx

WLAN

Settings

WLAN

Disconnect any wired connection from your computer . 

For Computer Users

AIRPHO_xxxx

AIRPHO_xxxx

connected

Click the Wi-Fi icon on the taskbar and connect to the 
Extender’s network (e.g. AIRPHO_xxxx)

Connect to the Extender’s network

For Mobile Device Users

Go to Wi-Fi setting of your mobile device, and connect to 
the Extender’s network (e.g. AIRPHO_xxxx)