PDF User Manual

  1. Home
  2. Manuals
  3. Aastra 51i User's Quick Start Manual

Aastra 51i User's Quick Start Manual

57i 57i CT 53i 55i AastraLink Pro 160 9143i 9480i 9480i CT 536M 560M

Made by: Aastra
Type: User's Quick Start Guide
Category: IP Phone
Pages: 2
Size: 7.18 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

AastraLink Pro 160 User’s Quick Start Guide - 

Phone Setup

 

41-001134-04 REV 00

Identify Your Network Installation Option 

For Ethernet networks that

DO NOT supply power to the phone:

- Use the 48V AC Power Adapter

  to connect from the DC power port

  on the phone to a power source.

- Use the Ethernet cable (supplied)

  to connect from the phone to a 

  network jack. 

   

For Ethernet networks

that supply in-line power to 

the phone (IEEE 802.3af):

- Use the Ethernet cable (supplied)

  to connect from the phone

  directly to the network.

- No 48v AC power adapter

  required.

For Ethernet networks that DO NOT

supply power to the phone:

- Use a Power over Ethernet (PoE)

  power injector.

- Use the Ethernet cable (supplied)

  to connect from the phone to the 

  PoE power injector.

- Use an additional Ethernet cable

  from the PoE to the Network jack (not supplied).

 

NOTE: The optional PoE and Ethernet 

cable are available from your Aastra 

dealer as optional accessories

(p/n D0023-0031-00-00 and 

p/n D0061-0065-00-00, respectively).  

   

This quick start guide is designed to

help you quickly set up and use your

IP phone in an AastraLink Pro 160 

network.  The complete documentation 

set is available online at: 

http://www.aastratelecom.com/support

53i

55i

57i

Xfer

Conf

L2

L3

L1

35i

Conf

Services

Xfer

Icom

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

1

4

3

6

2

5

7

9

8

0

*

#

Goodbye

Options

Hold

Redial

L1

L2

L3

L4

35i

Conf

Services

Xfer

Icom

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

1

4

3

6

2

5

7

9

8

0

*

#

Goodbye

Options

Hold

Redial

L1

L2

L3

L4

57i CT

Services

Save

Del

Swap

51i

Wall Mount

Drilling Template

asdassa
asdadsda

Handset Handset

Cord

Mounting Template

and Hardware

Ethernet

Cable

Power Adapter

The 5i Models also have these:

Base Legs Small Programmable

Key Card (53i)

Large Programmable

Key Card (55i)

The 9143i, 9480i, and 9480i CT Models also have these:

Base Stand Programmable Key Card

and Plastic Lens (33i only)

9143i

9480i

9480i CT

Number Card

and Lens

The CT  Models also have these:

Power Adapter

(for charging cradle)

Belt Clip

(for cordless

handset)

Battery

(for handset)

Charging Cradle

(for cordless

handset)

Install Your Phone on a Desktop or a Wall 

To install the phone on a desk:

5i Series Phones

      Attach each leg to the back of the phone by inserting the tabs on the leg into the

      slots on the bottom of the phone.  There are three pairs of leg slots on each corner

      of the phone; each leg uses two pairs of slots when attached. (See Figure A)

      There are a total of 4 viewing angles (by reversing the legs, the incline on the phone 

      can be changed). (See Figure B).

9143i, 9480i, 9480i CT Phones

     

o

n

m

1. Attach the stand by inserting the tabs on the stand (marked with      ) into the slots

    on the bottom of the phone.  For a higher viewing angle, use the slots marked       . 

    For a lower viewing angle, use the slots marked        .

2. Push the stand towards the phone until it snaps into place. (See Figure C).

Figure B

Figure A

To install the phone on a wall:

1.  Use the wall mount drilling template to locate and mark the position

      for the mounting screws on the wall. 

2.  Drill the holes and insert the mounting screws (insert the wall anchors

      before inserting the mounting screws if required). 

3.  Coil the cables into the spaces provided on the back of the phone.

4.  Connect the Ethernet cable to the wall network jack.

5.  Place the wall mount holes on the back of the phone over the screw

     heads on the wall and pull down to lock the phone in.  

NOTE:  Before installing the phone on the wall, connect the handset cord to the handset;

connect the other end of the cord into the handset jack on the back of the phone.  Use

steps 3 and 4 to connect all other cables to the phone.  If you have a phone wall plate with

pegs already installed on your wall, skip steps 1 and 2.  Refer to Figures D and E.

Figure C

Figure D

(5i Series Phones) 

Figure E

(9143i, 9480i, 9480i CT Phones) 

1

   Connect the supplied Ethernet cable

    to the       port (on 9143i, 9480i, and

    9480i CT phones) the 

LAN port (on 5i phones).

l

   Connect the other end of the

   Ethernet cable to the Ethernet

   hub/switch or the network jack.

To Network

9143i, 9480i, 9480i CT Phones 

5i Series Phones

To Network

9143i, 9480i, 9480i CT Phones

5i Series Phones

3

1.

2.

k

WARNING:  This will disconnect your network connection. 

   Connect the Ethernet cable from the phone to the Network Jack.

B

A

Reconnect the cable previously removed 

in step "B" to the back of the phone 

marked with 

; (9143i, 9480i, 9480i CT phones)

C

Other Network Devices

To Other 

Network Device

Connect Your Phone to the AastraLink Pro 160 Network

   If you already have a network device, such as your computer,

   connected to the Network Jack where you are installing the

   phone, you will need to temporarily disconnect it from the

   Network Jack. 

To Other 

Network Device

 or 

PC (5i Series phones).

1.

2.

NOTE:  The phone begins the  startup process when power is first connected.

NOTE:  If your Ethernet network DOES NOT

provide power to the phone (either from the

switch, or using an inline power injector), 

you must use the supplied 48v AC adapter

to power the phone.  Connect the 48v adapter

cable into the phone’s power connector        and

plug the adapter into an AC power source.

B

A

Phone Powered by Inline

Power from the Network 

Phone Powered by

48V AC Power Adapter 

C

(Optional) Phone Powered

by PoE Power Injector 

NOTE:  Before installing the phone on the desk, connect the handset cord to the handset; 

connect the other end of the cord into the handset jack on the back of the phone.

To install the cordless handset:

1. Attach the charging cradle power adapter to the

     charging cradle and plug the other end into a

     non-switched AC outlet. (Figure F)

2. Turn the cordless handset face down, remove the

     back cover, and install the battery. (Figure G) 

     Replace cover.

3. (optional) Clip the belt clip onto the back of the phone. 

Figure F

Figure G

Supported Aastra SIP IP Phone Models

Optional Aastra IP Phone Expansion Modules

536M

Provides up to 36 additional softkeys 

to the 53i, 55i, 57i, and 57i CT

560M

Provides up to 60 additional softkeys

to the 55i, 57i, and 57i CT

SIP IP Phone Piece Parts

All models have these:

2

1

 


background image

AastraLink Pro 160 User’s Quick Start Guide - 

Account Registration

 

For User Guides, Regulatory information, and Conformance Statements regarding this product, refer to the online documentation at http://www.aastratelecom.com/support.

41-001134-04  Rev 00

User

Password:

AastraLink Pro 160

IP Address:

2

Your system administrator has 

installed an AastraLink Pro 160 on your

 IP phone network. 

This quick-start procedure describes 

how to register your IP phone with the 

AastraLink Pro 160. When you complete 

this procedure, your phone will 

operate on your network, 

ready to make and receive calls. 

Checking for Firmware

Do not unplug phone!

60%

Register User Name

ABC

Dot

Backspace 

Enter

Bob 

Enter First Name

Register User 

ABC

Dot

Backspace 

Jones 

Enter Last Name

Enter

Back

Register User

Enter

Bjones@aastra.com

Back

Enter Email Address

ABC

Dot

Backspace

Register User

Enter

*****

Back

Enter Password

Backspace

Visit

Exit

http://10.20.50.135

for more options

May 1 10:15 am

Vmail

L1

ParkCall

201 - B Jones

DND

Forward

Directory

More

1

Enter First Name

Enter your first name and press <Enter>.

Register Your Phone on the AastraLink Pro 160 Network

When power is first connected, the phone begins a startup sequence and registration process.

The phone checks for new configuration and firmware updates from the AastraLink Pro 160.

 If a new update is found, the phone displays the update it is installing (either “Updating Config” or “New Firmware”).

This may take a few moments while the configuration server downloads the latest updates. 

WARNING:  Do not unplug or remove power from the phone while it is checking and installing firmware. 

Proceed to the following steps to complete the registration process.

2

Enter Last Name

Enter your last name and press <Enter>.

3

Enter Email Address (Optional)

Enter your email address and press <Enter>.

4

Enter Password

Enter a password and press <Enter>.

5

AastraLink Pro 160 IP Address

Your IP phone reboots.  When startup is

complete, your Phone UI displays the 

IP address of the AastraLink Pro 160 device.

6

Idle Screen

To complete the registration process, press <Exit>.

The IP phone idle screen appears.  This screen

displays the user name, date, and the set of

default softkeys configured for your phone.

Your phone’s registered extension number

appears in the upper right hand corner.

NOTE:  You can skip this step and enter the

email address later using the AastraLink Web UI.

NOTE:  Record your password below for

future reference.

NOTE:  Record the IP address below for

future reference.  You will need to enter it

into your Web browser for accessing the

AastraLink Web UI.

NOTE:  For more information about

configuring the softkeys on your phone,

see the AastraLink Pro 160 User Guide.

7

1.   Enter the IP address of the AastraLink Pro 160 in your Web browser.  For example, http://10.20.50.135.

2.   In the Login window, enter your User extension and the password chosen during registration (in Step 4).

3.   Select <Login> to view the AastraLink Pro 160 Web UI Main Menu.  The current AastraLink Pro 160 status displays 

       in the lower left corner of the Main Menu window.

Access the AastraLink Pro 160 Web UI

To access the AastraLink Pro 160 Web UI:

AastraLink Pro Login Screen

AastraLink Pro Web UI Main Menu

Refer to the AastraLink 160 User’s Guide

for more information about operating your

IP phone.