PDF User Manual

  1. Home
  2. Manuals
  3. A4 Tech. X-710 User Manual

A4 Tech. X-710 User Manual

X-718 X7 X-710 X7 X-718

Made by: A4 Tech.
Type: User Manual
Category: Mouse
Pages: 14
Size: 0.25 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

 

 

 

 

 

 

User

’s Manual 

Model(s): X-710 X-718 

 

 

www.a4tech.com 

 

 

SPEED Game Mouse 

 


background image

 

 

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TOTHE FOLLOWING TWO 
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY 
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. 

Federal Communications Commission Requirements 
The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15   
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction, may cause harmful interference to radio communication. However,   
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following measures:   

Reorient of relocate the receiving antenna. 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

Consult the dealer or an experienced radio/TV technician for help. 

 

 

THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE 
COULD VOID THE USER

’S AUTHORITY TO OPERATE THE EQUIPMENT. 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:   
(1).    this device may not cause harmful interference, and   
(2).    this device must accept any interference received, including interference that may cause undesired operation. 
 
 
 
 

 


background image

HOW TO CONNECT YOUR MOUSE 

 

1. 

Locate an available USB mouse port on the back of your computer. 

2. 

Insert the USB mouse connector into the USB port . 

 

If you like to use the PS2 port (for the round PS/2 plug), you will need to plug the 

USB connector with a PS2 adapter.   

 

 

HOW TO CHANGE THE DPI SETTING OF SPEED GAME MOUSE   

 

Click the button shown on the right figure to quickly shift 

from 600-800-1200-1600-2000 DPI as the scroll wheel 

changes color between shifts.    You don

’t need any driver 

for this fabulous function! 

 

 

 

 

 

 

 


background image

MODEL: X-710   

At Resolution: 

Scrolling Wheel   

will change to: 

Recommend for:     

Suitable for 

Resolution

 of display 

Recommend) 

400DPI 

Non 

Slow-Speed and normal accuracy player 

640×480 

600DPI 

Green 

Medium-Speed and required average accuracy player 

800×600 

800DPI 

Yellow 

Fast Speed and required above average accuracy player 

1024×768 

1000DPI 

Red 

High-Speed and required above average accuracy player 

1152×864 

Click 6

th

 key to quickly shift from 400, 600, 800 to 1000 DPI   

MODEL: X-718

 

At Resolution: 

Scrolling Wheel 

  will change to: 

Recommend for:   

 

Suitable for 

Resolution

 of display 

Recommend)

 

600DPI 

Non 

Slow-Speed and normal accuracy player 

800×600 

800DPI 

Green 

Medium-Speed and required average accuracy player 

1024×768 

1200DPI 

Yellow 

Fast Speed and required above average accuracy player 

1152×864 

1600DPI 

Red 

High-Speed and required pinpoint accuracy player 

1280×960 

2000DPI 

Red & Yellow 

coruscating   

Extra High-Speed and required pinpoint accuracy player 

1280×1024 

Click

 6

th

 key

 to quickly shift from 600, 800, 1200, 1600 to as high as 2000 DPI   

 

 


background image

STEP  ONE:    HOW  TO  INSTALL  SMART-X7  SOFTWARE       

*****  For  Windows  Me  /  2000  /  2003  /  XP 

1. 

MUST:    Please uninstall any previous mouse driver before installing the Smart-X7 

2. 

MUST:    Make sure you have completely finished setting up your 
mouse pad and mouse 

3. 

Insert the included Compact Disc (CD) into your CD-ROM 

4. 

Click 

“Install Driver”. Select model: X-710/718 Optical Mouse   

5. 

Click the button on the right to install driver 

6. 

Follow the on screen instruction to complete your installation 

7.      Restart your computer after the driver has been installed       

8.    You will see a mouse icon 

” appear on the bottom right   

of your task bar (near the clock area)   

 

9.    Double click on the mouse icon 

” will bring you the mouse property (Image - Top:    Mouse Properties Window) 

10. 

  If the mouse image appears in the mouse properties menu looks exactly the same as the mouse on hand, then you 

have successfully installed the Smart-X7 driver

 

 

Mouse Properties Window 

 

 


background image

STEP TWO:    HOW TO PROGRAM YOUR MOUSE BUTTONS 

 

 

MOUSE PROPERTY 

l  Open your Mouse Properties.     

First Tab:    Button                             

Section I:    Button Assignment 

1.    The mouse image that appears in the first section is a key to numbers 

listed to the right.    For example, button #1 has been assigned as 

“Main 

Button

” by default and it’s not programmable. 

2.    The rest of the buttons from #2 to # 

5

 are programmable.     

Section II:    Double-Click Speed            Section III:    Button Configuration 

Adjust your double-click speed                    If you select 

“Left-Handed”, your 

Main Button will be #2 button.         

 

Keyboard Property 

Before we go further to setting up your mouse buttons with game commands, 

we want to make sure your keyboard properties has the character repeat 

setting correct.    Follow the steps below to get to Keyboard Properties: 

1)  Go to Control Panel 

2)  Click on Keyboard 

3)  For Repeat Delay:    Most right (SHORT) 

4)  For Repeat Rate:    Most right (FAST) 

5)  Apply >> OK 

 


background image

STEP THREE:    HOW TO SET X7-JUMP FUNCTION   

( LEARN TO SIMULATE KEYBOARD

’S COMMANDS AND PROGRAM XY SENSITIVITY INDEPENDENTLY)   

The function 

Smart-X7 

not only provides program XY sensitivity 

independently , but also can be set in any of the buttons from # 2 to 
# 5 of simulation functions for the keyboard and half of the mouse 
button simulation functions for the keyboard.   

1.  Double click on the mouse icon 

” will bring you the mouse 

property. (image A ) 

2.  One Click on X7-Jump and you

’ll see the pop up window ( image B) 

Here you will see 2 Parts:   

l  Part One is Change Mouse DPI.   

l  Part Two is Keystrokes.   

 

Let

’s enjoy all the innovative features of the mouse step by step as 

follows : 

 

image A 

 

image B 

 


background image

Section I: Change Mouse DPI  :

Set mouse XY axis sensitivity levels 

 

In order to Shift from pixel-precise targeting to fast-twitch maneuvers, without stopping the action. This 

avoids the error in operation for more efficiency. You can configure your mouse as synchronism or 

non-synchronism higher/lower with many parameters to control the X/Y dpi by yourself in this smart X7 

Software , 

Model 

At Resolution: 

LED of Scrolling Wheel 

Confirmable range of X/Y axes by software 

400DPI 

Non 

200DPI-400DPI 

600DPI 

Green 

200DPI-600DPI 

800DPI 

Yellow 

200DPI-800DPI 

X-710 

1000DPI 

Red 

200DPI-1000DPI 

600DPI 

Non 

200DPI-600DPI 

800DPI 

Green 

200DPI-800DPI 

1200DPI 

Yellow 

200DPI-1200DPI 

1600DPI 

Red 

200DPI-1600DPI

 

X-718 

2000DPI 

Red & Yellow coruscating   

200DPI-2000DPI

 

 

If to cancel this mode, just click the 6

th

 button ,it will automatically change to the next light status, if you need 

the dpi amount prior to usage ,just click 

“ Utilize mouse sensitivity configuration” mode and apply “∨”. 

 

 

 


background image

Section II:    Keystrokes 

        To ADD keystrokes:    Click on the button 

“New Keystroke” and you’ll see 

“Keystroke” Window pops up (Image:    left, bottom) 

Here you will see 3 radio buttons: 

l  Press and hold will input keystrokes consecutively 

l  Press and hold will only input once the keystrokes 

l  Press will input keystrokes consecutively, press again will release the 

keystrokes 

If you select the 1

st

 radio button, it means you would like to have the mouse 

completely simulate the keyboard

’s keystroke – when you press and hold a 

key on the keyboard, it will input a character consecutively.   

If you select the 2

nd

 radio button, it means you would like to have the mouse 

partially simulate keyboard

’s keystroke – when you press and hold a key on 

the keyboard, it will only input once unless you lift it and press it again.   

If you choose the 3

rd

 radio button, it means that you should have the mouse 

button automatically simulate the keyboard

’s keystroke – when you press and 

hold a key on the keyboard , it will automatically keep inputting a character 

unless you type the mouse button assigned again. 

Let

’s do some example together… 

 

 

 

 

 

 


background image

Example 1:    Select 1

st

 Radio Button 

1.  Click on 

“Record” (Reference:    Image A) 

2.  Press 

“R” on the Keyboard 

3.  Click 

“OK” 

4.  It will bring you back to previous page     

5.  Now click on 

“Keystroke (R)”, the one you just created 

6.  Select the Mouse Button (green icon) on the Mouse Image to your right 

to store the 

“Keystroke (R)”. 

7.  Green icon will turn red once it

’s been selected. (Image B) 

8.  Click 

“Apply” >> “OK” 

We have stored it in Mouse Button # 2.   

Let

’s try it on regular word document or on game application (Counter 

Strikes). 

Try it on Word Document.    Press and hold your mouse button #3.   

Did you see the character 

“RRRRRRR” inputted consecutively? 

Try it on Game Application.    Press and hold your mouse button # 

3.    In Counter Strike, 

“Keystroke (R)” means to add bullets.    Did 

you see it adding bullets?    If yes, you have successfully created a 

command.   

 

(Image A) 

 

(Image B)

 

 


background image

Example 2:    Select 1

st

 Radio Button 

1.  Click on 

“Ctrl+A” (Reference:    Image C) 

2.  Press 

“Ctrl+A” on the Keyboard 

3.  Click 

“OK” 

4.  It will bring you back to previous page     

5.  Now click on 

“Keystroke (Ctrl+A)”, the one you just created 

6.  Select the Mouse Button (green icon) on the Mouse Image to your right to 

store the 

“Keystroke (Ctrl+A)”. 

7.  Green icon will turn red once it

’s been selected. (Image D) 

8.  Click 

“Apply” >> “OK” 

We have stored it in Mouse Button # 3.   

Let

’s try it on regular word document   

l  Try it on Word Document.    Press and hold your mouse button #3.    Did 

you see the character 

“Ctrl+A Ctrl+A Ctrl+A Ctrl+A Ctrl+A” inputted 

consecutively? 

 

 

 

 

 

(Image C) 

 

(Image D)

 

 


background image

Example 3:    Select 2

nd

Radio Button 

1.  Click on 

“Record”    (Image E) 

2.  Press 

“A4TECH” on the Keyboard 

3.  Click 

“OK” 

4.  It will bring you back to previous page 

5.  Now click on 

“Keystroke(A4TECH)”, the one you just created 

6.  Select the Mouse Button (green icon) on the Mouse Image to your right 

to store the 

“Keystroke (A4TECH)”.     

7.  Green icon will turn red once it

’s been selected.    (Image F) 

8.  Click 

“Apply”, then “OK” 

We have stored it in Mouse Button # 4.     

Let

’s try it on regular word document and on game application. 

l  Try it on Word Document.    Press and hold your mouse button #4. 

Did you see the only character 

“A4TECH” even though you have press 

and hold?    This is partially simulation.    You may store your most 

frequently used word, for instance, you first name. 

l  Try it on Game Application.    Press and hold your mouse button # 4. 

In Counter Strike, 

“Keystroke (A4TECH)” means nothing.    So when you 

try it in counter strike, it will do nothing. 

 

(Image E) 

 

(Image F)

 

 


background image

Example 4:    Select 3

rd

Radio Button 

1.  Click on 

“Record” 

2.  Press 

“Z the Keyboard (Image G) 

3.  Click 

“Stop” to stop recording >> then click “OK” 

4.  It will bring you back to previous page (Image F) 

5.  Now click on 

“Keystroke(Z)”, the one you just created 

6.  Select the Mouse Button (green icon) on the Mouse Image to your right to 

store the 

“Keystroke(Z)”. 

7.  Green icon will turn red once it

’s been selected. (Image H)   

8.  Click 

“OK” 

We have stored it in Mouse Button # 5.     

Let

’s try it   

l  Press and hold your mouse button # 5. 

In BF2(A Stratagem Game) 

“Keystroke (Z)” means to hunker down     

Did you see yourself stayed hunker down unless you don

’t re- press the 

button #5 to Stop its automatic typing 

“ ? 

l  Try it on Word Document.    Press and hold your mouse button #5.    Did 

you see the character 

“ZZZZZZZZZ” inputted consecutively unless you 

don

’t re- press the button #5 to Stop its automatic typing “ ?If yes, you 

 

Image G 

 

Image H

 

 


background image

have successfully created a command. 

 

TECH SUPPORT 

For tech support, please visit our website at 

www.a4tech.com

 or email us 

at 

support@a4tech.com

 

WARRANTY 

All A4 Tech products come with 2 years limited warranty.