PDF User Manual

  1. Home
  2. Manuals
  3. A QR034 Owner's Manual

A QR034 Owner's Manual

Made by: A
Type: Owner's Manual
Category: Ventilation Hood
Pages: 19
Size: 2.47 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

for selecting American Standard… the benchmark of fine quality for over 100 years. To ensure that 

your installation proceeds smoothly, please read these instructions carefully before you begin.

Stainless Steel Under Cabinet 

Range Hood

THANK YOU 

SKU: QR034

Owner’s Manual

 


background image

 2
 

Table of Contents

Table of Contents    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2

Safety Information  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2

Warranty    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

One Year Limited Warranty  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Warranty Claim Procedure  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

Pre-Installation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5

Tools Required   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Hardware Included  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Package Contents    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Planning Installation    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 8

Installation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 11 

Operation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 13

Maintenance    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14

Filters  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14
Light Bulbs  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14

Care and Cleaning  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

Range Hood   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15
Filters  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

Troubleshooting    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 16

Specifications  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 17

Wiring Diagram    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 17 

Service Parts    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 18

Safety Information

READ AND SAVE THESE INSTRUCTIONS
Warning - To reduce the risk of fire, electric shock, or injury to 

persons, observe the following:

1 .  Use this unit only in the manner intended by the manufacturer . If 

you have any questions, contact the manufacturer . 

2 .  Before servicing or cleaning unit, switch power off at service 

panel and lock service disconnecting means to prevent 
power from being switched on accidentally . When the service 
disconnecting means cannot be locked, securely fasten a 
prominent warning device, such as a tag, to the service panel .

3 .  Installation work and electrical wiring must be done by qualified 

person(s) in accordance with all applicable codes and standards, 
including fire-rated construction.

4 .  Sufficient air is needed for proper combustion and exhausting 

of gases through the flue (chimney) of fuel burning equipment 
to prevent back drafting . Follow the heating equipment 
manufacturer’s guideline and safety standards such as those 
published by the National Fire Protection Association (NFPA), 
and the American Society for Heating, Refrigeration and Air 
Conditioning Engineers (ASHRAE), and the local code authorities .

5 .  When cutting or drilling into a wall or ceiling, do not damage 

electrical wiring and other hidden utilities .

6 .  Ducted fans must always be vented to the outdoors .

DANGER: Turn off the power circuit breaker or the power 
switch on the junction box before installing or servicing 
this unit . Touching circuitry inside the range hood while it is 
energized will result in death or serious injury .

DANGER: All electrical wiring must be properly installed, 
insulated, and grounded . Improper insulation and grounding 
will result in deadly electrical shock .

DANGER: If installing this unit over a gas range, turn off 
the gas at the source before installing or servicing this unit .

WARNING: Attempting to install or service this unit 
when you do not have the necessary technical or electrical 
background could result in personal injury .

WARNING: The unit has sharp edges . Always wear safety 
gloves during installation, cleaning, or servicing .

WARNING: Always leave safety grills and filters in place. 
Without these components, operating fans could catch on to 
hair, fingers, or loose clothing.

WARNING: Stay clear of the rotating fan when the motor 
is running . 

WARNING: Keep this appliance clean and free of grease 
and residue build-up at all times to prevent fires.

CAUTION: This device is for general ventilating use only . 
Do not use to exhaust hazardous or explosive materials and 
vapors .

 


background image

 

3 CONGLOMKB .COM

 

 

Please contact 1-877-333-0098 for further assistance.

Safety Information (continued)

Cooking Safety Information

1 .  Never leave the range hood unattended when in use . 
2 .  Never cook over open flames under the range hood.
3 .  Always turn the range hood on when cooking at high heat  

or when cooking flaming foods.

4 .  If you choose to hang the range hood as below (Fig . 1) distance 

(D) from the cooktop surface, use extra caution as the surface of 
range hood may be extremely hot to the touch. For this unit, (D 
in Fig . 1) is 18 in .–32 in . (458 mm–813 mm) . If you choose an 18 
in . installation, the temperature of the unit surface will be high 
if the unit is operated under high power cooking for a certain 
amount of time .

5 .  Use caution when cooking with oil or with deep-fryers. 

Overheating may cause oil to reach its flash point and ignite. 
Used oil will ignite at lower temperatures than fresh oil . Heat 
oils slowly on low to medium setting .

6 .  Avoid boil overs, as they may cause smoking and greasy 

spillovers that could ignite .

7 .  To prevent burns or fires, always use cookware appropriate to 

the size of the heating element that you are using .

8 .  In event of a cooking fire, observe the following:

 

- Be careful to avoid burns . 

 

- Smother flames with a close-fitting lid, cookie sheet, or 

metal tray, then turn off the burner. If the flames do not go 
out immediately, evacuate and call the fire department.

 

- Never pick up a flaming pan.

 

- Do not use water, including wet dishcloths or towels, as you 

could cause a steam explosion.

 

- Use an extinguisher only if: (a) you have a class ABC 

extinguisher and you know how to operate it, (b) the fire is 
small and contained in the area where it started, (c) the fire 
department is being called, and (d) you can fight the fire with 
your back to the exit. 

Cleaning Safety Information

1 .  The fan and filters must be cleaned periodically and kept free 

from accumulation of cooking residue. Old and worn filters must 
be replaced immediately .

2 .  Never disassemble parts to clean . Parts should be disassembled 

by qualified persons only.

WARNING: To reduce the risk of fire, use only metal duct 
work . Never use plastic duct work .

WARNING: To reduce the risk of fire or electric shock, do 
not use this range hood with any external solid state speed 
control device .

CAUTION: For general ventilation use only . Do not use the 
range hood fans to exhaust hazardous or explosive vapors.

CAUTION: Never dispose of cigarette ashes, ignitable 
substances, or any foreign objects in fans .

CAUTION: At least two people are needed to move and 
safely install the unit . Failure to properly lift the range hood 
could result in product damage or personal injury .

Fig . 1

D

 


background image

 4
 

Warranty

ONE YEAR LIMITED WARRANTY

A thorough inspection must be made before installation and any damage must be promptly reported . We will not be liable for failures or 
damage that could have been discovered or avoided by proper inspection and testing prior to installation .

Conglom Kitchen & Bath warrants this product to be free from defects in materials or workmanship for one (1) year from the date of purchase . 
Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to Conglom Kitchen & Bath for all 
warranty claims .  

This warranty is non-transferable and shall be voided if the unit is removed from its initial installation or if it is not installed following the 
manufacturer’s instructions . It does not apply in the event of product damage due to the use of other than genuine Conglom Kitchen & Bath 
replacement parts, (Replacement parts may be obtained by calling 1-877-333-0098 between 8:30 am - 5:00 pm EST) installation error, abuse, 
misuse or improper care and maintenance (whether performed by a plumber, contractor, service provider or member of the purchaser’s 
household). The warranty excludes damage due to aggressive air or water conditions, harsh or abrasive cleaners and/or materials. 

Under no circumstance shall we be held liable for personal injury or property damage resulting from improper installation or use of this 
product . We will not be held liable for inconvenience caused by loss of use of this product, costs incurred for labour or materials, removal 
and installation of replacement units, or any other incidental or consequential damages . Costs relating to obtaining access for repair or 
replacement are the responsibility of the user . 

Our obligation shall be limited to the repair or replacement of a unit (at our discretion) that may prove, by our sole examination, to be defective 
under normal use and service during the warranty period . 

Any failure of this product that is not traceable to a defect in material or workmanship is not covered by this warranty. These non-warrantable 
items include, but are not limited to: 

 

- Improper installation not in accordance with manufacturer’s instructions .

 

- Dents and/or scratches incurred during shipping, handling, or installation. 

 

- Change in colour or finish due to chemical usage.

 

- Damage caused by failure to follow care and cleaning guidelines, including damage caused by the use of abrasive cleaners .

 

- Alterations made to the unit by the purchaser or installer .

 

- Damage caused by accidental impact, fire, flood, freezing, and normal wear.

 

- Bends and warping caused by forced connections, over-tightened fittings, and inadequate support during installation.

 

- Any defects or damage to light bulbs .

This warranty does not extend to commercial and institutional installation or use.

WARRANTY CLAIM PROCEDURE

If a claimable defect occurs or replacement parts are needed, please contact our customer service team at 1-877-333-0098 (8:30 am - 5 pm, 
EST, Monday–Friday) .

Before you make your call, please ensure that you have:

 

- Model number or description of the range hood .

 

- Proof of sale .

 

- Details regarding the defect and/or part number. 

 

- Name(s) and address(es) of the owner and installer .

 


background image

 

5 CONGLOMKB .COM

 

 

Please contact 1-877-333-0098 for further assistance.

Pre-Installation

TOOLS REQUIRED

Measuring tape

Level

Utility knife

Marker or pencil

Tape

Adjustable 
wrench

Phillips screwdriver

Flathead 
screwdriver

Needle nose 
pliers

Hammer

Electric drill 
or powered 
screwdriver

Safety gloves

Safety gloves

AA

BB

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size .

Part Description

Quantity

AA

Screw - M4 mm x 16 mm

8

BB

Screw - M5 mm x 12 mm 

6

 


background image

 6
 

B

A

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description

Quantity

A

Range hood (includes baffle filters)

1

B

Duct set

1

 


background image

 

7 CONGLOMKB .COM

 

 

Please contact 1-877-333-0098 for further assistance.

Pre-Installation (continued)

14-1/2”(370mm)

9-7/8”

(250mm)

7-1/8”

(182mm)

)

m

m4

52(

”0

1

18”(458mm)

29-3/4”(757mm)

)

m

m4.

59

7(”

8/

3-

13

Fig.2

 


background image

 8
 

Pre-Installation (continued)

PLANNING INSTALLATION 

Number of people required: 2 or more
Carefully check the range hood for damage and for missing parts prior 

to installation . If there is any damage or if you are missing parts, do 

not proceed with the installation . Report damage and missing parts 

immediately. Do not dispose of packaging before you are satisfied with 

your new range hood . 
1 . Before installation, measure all distances to ensure the proper position 

of the range hood (A) .

 

- The distance (1) from the cooking surface to the range hood 

must be at least 18 in . (458 mm) . For the best performance, do 

not install the range hood more than 32 in . (813 mm) above the 

cooking surface .

 

- Dimension (3) should be at least 30" (762 mm). The range hood 

should be approximately the same size as the cook top.

2 . If the bottom of the cabinet (6) above the location where the range hood 

is to be installed is recessed, attach appropriately sized wood filler strips 

(7) on each side using wood screws . 

3 . Screws are provided to secure the range hood to most types of cabinets, 

but consult a qualified installer to verify that the supplied screws are 

suitable for your cabinets . 

4 . Put a thick, protective covering over your counter, cooktop, or range 

to protect it from damage and dirt during installation . Remove any 
hazardous objects around the area . 

WARNING: Always wear safety goggles and gloves 
during installation .

1

3

4

3

6

7

7

7

A

Fig . 3

VENTING OPTION:

This unit is a top venting range hood .
You must use a top venting system that vents to the outdoors as shown in Fig . 4 and Fig . 5 .

Ensure that you have enough vertical space in the cabinet as to allow for the housing of the motor and any ductwork necessary for your 
installation .

13

Vertical Roof Venting

Horizontal Wall Venting

14

16

Fig.4

Fig.5

15

 


background image

 

CONGLOMKB.COM

 

 

Please contact 1-877-333-0098 for further assistance.

Pre-Installation (continued)

Follow these guidelines when installing duct work:

 

- Your venting system must vent to the outdoors either horizontally through the back wall (13) or vertically through the 

roof (14) (refer to Fig. 4/Fig. 5).

 

- Use round metal duct work with a uniform diameter of 6 in . (152 mm) . The total duct run in the venting system should 

be not more than 10.7 m (35 ft).

 

- Calculate the total effective length of the duct work by adding the equivalent lengths in the table shown (Fig . 6) . For 

each fitting used add the length of the equivalent straight duct used in the system.

 

- Fasten all connections between pieces of duct with sheet metal screws and tape all joints with certified duct tape.

 

- If you must turn the path of the duct work using elbows, keep the number of elbows to a minimum for effective 

performance and use no more than three 90° elbows. Ensure that there is a minimum of 18 in. (458 mm) of straight vent 
between each elbow. Elbow as far away from the range hood’s exhaust opening as possible.

 

- Cap the exterior of the duct with a wall cap (15) or roof cap (16). Never use 4 in. (102 mm) laundry-type wall caps. Use 

caulking to seal exterior wall or roof opening around the cap.

 

- The venting system must have a damper . If the roof or wall cap has a damper, do not use the damper supplied with the 

range hood .

    
Size of the hole to be cut on the bottom of the cabinet (refer Fig . 7) .
Size of motor housing that needs to be inside the cabinet (refer Fig . 2 on page 7) .

Equivalent Length Chart

Type of duct

Length added

90° Elbow

5 ft (1 .52 m)

90° Flat elbow

12 ft (3 .66 m)

2 x 90° Elbow

10 ft (3.05 m)

9 ft (2.74 m) Straight duct

9 ft (2.74 m)

Wall cap

0 ft (0 m)

  15” (380mm)

10 1/4”(260mm)

Fig . 6

Fig . 7

 


background image

 

10

 

Pre-Installation (continued)

WIRING CONNECTION REQUIREMENTS

Installation work and electrical wiring must be done by a qualified 

person(s) in accordance with all applicable codes and standards, 

including fire-rated construction.
OBSERVE ALL GOVERNING CODES AND ORDINANCES WARNINGS

 

- Electrical grounding is required for this range hood . Check 

with a qualified electrician if you are not sure whether the 

range hood is properly grounded .

 

- Failure to follow electrical requirements may result in a fire.

 

- A fuse in the neutral or grounding circuit could result in 

electrical shock .

 

- If the hot/cold water pipe is interrupted by plastic 

nonmetallic gaskets or other materials, DO NOT use for 

grounding .

 

- DO NOT GROUND TO A GAS PIPE .

IMPORTANT: It is the customer’s responsibility to contact a qualified 

electrical installer and assure that the electrical installation is 

adequate and complies with the National Electrical Code, or CSA 

standards, as well as all local codes and ordinances .
1 .  Save installation instructions for electrical inspector’s use .
2 .  If codes permit and a separate ground wire is used, it is 

recommended that a qualified electrician determine if the  

ground path is adequate .

3 .  DO NOT use an extension cord or adapter plug with this  

appliance .

4 .  The range hood must be connected with copper wire only .
5 .  The range hood should be connected directly to the junction 

(or circuit breaker) box through flexible, armoured or 

nonmetallic sheathed copper cable . Allow some slack in the 

cable so the  

appliance can be moved if servicing is ever necessary .

6 .  A UL listed or CSA approved conduit connector must be 

provided at each end of the power supply cable (at the range 

hood and at  

the junction box).

7 .  When making the electrical connection, cut a 3.2 cm (1-1/4 in. 

hole in the wall . A hole cut through wood must be sanded until  
smooth . A hole through metal must have a grommet .

8 .  When cutting or drilling into the wall or ceilling, do not damage  

electrical wiring and other hidden utilities .

9.  Wire size must conform to all local codes and ordinances . 

The latest edition requirements of the National Electrical Code 
ANSI/NFPA 70, or the latest edition CSA Standards C22.1-94, 
Canadian Electrical Code Part 1 and C22.2 No. 0-M91. 

DANGER: 

Risk of electrical shock . This range hood 

must be properly grounded .

 

DANGER: Turn off the power circuit breaker or the 

power switch on the junction box before installing this 
unit . Touching circuitry inside the range hood while it is 
energized will result in death or serious injury .

DANGER: All electrical wiring must be properly installed, 

insulated, and grounded . Improper insulation and grounding 
will result in deadly electrical shock .

NOTE: Temporarily wire the range hood to test it for 

proper operation . If the range hood does not operate 
correctly, do not proceed with the installation .

 

- Use the power supply cable to connect the range hood 

(A) directly to the junction box or circuit breaker box. Use 

a flexible, armoured, or nonmetallic sheathed copper 

cable only. Never use an extension cord or adapter plug.

 

- Connect a UL-listed or CSA-approved conduit connector 

to each end of the power supply cable (at the range hood 

and at the junction box). Connect the three colored wires 

(3) from the range hood (A) to the corresponding wires 

(4) from the electrical source: black to black (live), white 

to white (neutral), and green/yellow to green/yellow 

(ground) . Use either the top hole (1) or the back hole (2) 

of the range hood depending on your installation type .

 

- Turn the power on, and ensure that the lights and the fan 

are operating correctly .

 

- Once you have tested the electrical connection, 

disconnect the power supply cable and wires from the 

electrical source before proceeding with the rest of the 

installation .

 


background image

 11 CONGLOMKB .COM
 

 

Please contact 1-877-333-0098 for further assistance.

Installing the duct set

WARNING: This unit has sharp edges .  
Always wear safety gloves during installation .

 

- Attach the duct set (B) to the range hood (A) with eight  

screws (AA) .

A

B

AA

Installing the damper (if necessary)

WARNING: Sharp edges . Wear safety gloves .

CAUTION: Be very careful when installing the damper . 
Applying too much force or not bending the damper enough 
may damage or break the damper hinge ends .

The damper is pre-installed at the factory. Make sure that it has 
not come loose during shipping and re-install it, if necessary.

 

- Insert one end of the damper (1) into the hinge slot (2) at 

the top of the range hood (A) .

 

- Gently bend the damper (1) and insert its other end into the 

hinge slot (2) .

Installation

A

1

2

1s

 


background image

 12
 

Installation (continued)

Installing the range hood 

As per Fig . 7, cut the required hole in the cabinet .

 

- Lift the range hood (A) up under the cabinet to determine 

its final position. Fix the unit onto the cabinet with 6pcs of 
M5 x 12 mm tapping screws.

 

- If the bottom of the cabinet is recessed, add a wood filler 

on each side . The wood strips must be as thick as the 
recess . Use appropriately sized wood screws to attach the 
wood filler to its location.

*** Make sure the opening hole size is 15 in. (380 mm) L x 10 1/4 
in. (260 mm) on the bottom of the cabinet to the fit the range hood.

Attaching the duct

 

- Attach your ducting (6) (not supplied) to the range hood (A) 

and connect the duct to your exterior exhaust system.

Final step

 

- Reconnect the power supply cable and wires to the 

electrical supply . Turn the power on and ensure that the 
lights and fan are operating correctly .

Bottom View

Wood filler strips

Cabinet bottom

Wall

A

A

6

 


background image

 13 CONGLOMKB .COM
 

 

Please contact 1-877-333-0098 for further assistance.

Operation

 

There are four buttons, ON/OFF, SPEED, LIGHT and CLOCK SETUP. 

 

The center screen will show the clock (12 hour) .

1

2

3

4

5

Turning ON/OFF the unit

 

- Press (5) to turn on the power . 

When you turn the power on, the unit starts working in high 
speed, the clock indication on the center screen (3) will 
go off and "3" will be indicated on the screen. (During the 
operation speed indication will be indicated on the screen) .

 

- Press (5) twice to turn off the unit while it is operating . 

While the fan is off, the screen will display the time .

Delay shut off function

 

- While the fan is working, press (5) once, the fan and lights 

will automatically turn off after 2 minutes . 
The screen will indicate "2:00" and start counting down. 
Once the countdown is completed, the range hood will 
beep, the fan and lights will turn off automatically and the 
clock will show in the screen .

During the countdown operation:

 

- You will still be able to change the speed by pressing (4) .

 

- Press (5) once more to stop the fan immediately .

To change fan speed

While the unit is operating:

 

- Press the fan button (4) once, range hood will change to 

medium speed and "2" will be indicated on the screen.

 

- Press the fan button (4) again to change to low speed and 

"1" will show on the screen.

Turning ON/OFF the light

 

- Press the light button (2) to turn the light on and off . 

Set up the clock function

 

- Press the clock button (1) once, the center screen starts 

flashing "00:00".

 

- Press the light button (2) to change the hour display and 

the fan button (4) to change the minute display .

 

- During the setup, if no button is pressed for more than 5 

seconds, the setting displayed will be fixed. 
The setup can be done while the unit is running or not .

 


background image

 14
 

Maintenance

BAFFLE FILTERS

When baffle filters need replacing, exchange them with similar 
baffle filters with stainless steel clips. Also replace baffle filters 
that are damaged with punctures, bends, or broken frames .

 

- Turn off the range hood and disconnect the power .

 

- Replace with an equivalent baffle filter, then reconnect the 

power .

REPLACING LIGHT BULBS

When light bulbs burn out, replace them with a 25 W or 35 W / JDR 
16, GU10 twist and lock base light bulb.

 

□ Turn off the range hood, disconnect it from its power 

source, and ensure that the lights are cool .

 

□ Turn the bulb (2) counter-clockwise and pull it out to 

remove it .

 

□ Push in the new bulb (3) and turn it clockwise . Do not 

release the bulb until you are sure the bulb has been 
securely installed . Then reconnect the power .

 

□ If new bulbs do not operate, ensure that they are inserted 

correctly .

DANGER: Turn off the power circuit breaker or the power 
switch on the junction box before performing maintenance. 
Touching circuitry inside the range hood while it is 
energized will result in death or serious injury .

WARNING: Failure to replace worn out or damaged filters 
will increase the risk of fire.

WARNING: Light bulbs can become extremely hot when 
turned on . Do not touch bulbs until they are switched off 
and cooled . Touching hot bulbs could cause serious burns .

3

 


background image

 15 CONGLOMKB .COM
 

 

Please contact 1-877-333-0098 for further assistance.

Care and Cleaning

RANGE HOOD

WARNING: Failure to maintain basic standards of care 
and cleaning of the range hood will increase the risk of fire.

The range hood should be cleaned (regularly internally and externally) to preserve its appearance and performance. 

Do:

Do Not:

 

- Always clean in the direction of the grain (original  

polish lines) .

 

- Clean the range hood periodically with hot, soapy 

water and a clean cotton cloth . 

 

- Always rinse well with clean water two or three 

times after cleaning . Wipe completely dry with a 
soft non-abrasive cloth.

 

- After cleaning, you may polish with a non-abrasive 

stainless steel polish or cleaner . Always rub lightly 
and with the grain .

 

- Ensure that the venting system is free of debris, if 

you have one .

 

- Do not use corrosive or abrasive detergents, steel 

wool, or scouring pads . These will scratch and 
damage the stainless steel surface .

 

- Do not use corrosive or abrasive detergents, or any 

products containing chloride, fluoride, iodide, or 
bromide on this product, as they will deteriorate 
the surface rapidly .

 

- Do not allow cleaning compounds, salt solutions, 

disinfectants, or bleaches to remain in contact with 
the product for extended periods of time.

 

- Do not allow deposits to remain for long periods 

of time on the range hood . Rinse with water 
immediately and wipe dry with a clean cloth .

 

- Do not let plaster dust or any other construction 

residue enter the hood . During construction or 
renovation, cover the hood .

 - Combustible products used for cleaning such as 

acetone, alcohol, ether, or benzol are highly explosive 
and should never be used close to a range or stove .

BAFFLE FILTERS

The filter fitted by the factory is intended to filter out residue and grease from cooking. You do not need to replace them on a regular basis, 
but you should keep them clean .

Do:

Do Not:

 

- Clean the baffle filters once a month using non-

abrasive detergents, either by hand or in the 
dishwasher . When using a dishwasher, set the 
dishwasher to a low temperature and a short 
cycle setting. The filter may become discoloured 
in a dishwasher, but this does not affect its 
performance .

 

- Dry the baffle filters before re-installing them in the 

range hood .

 

- Do not allow oil to accumulate over more than 80% 

of the baffle filter surface. Oil accumulations may 
drip oil onto the range .

 


background image

 16
 

Troubleshooting

DANGER: Turn off the power circuit breaker or the power switch on the junction box before performing 
maintenance . Touching circuitry inside the range hood while it is energized will result in death or serious injury .

Problem

Solution

The range hood will not operate .

 

- Check that the power supply cable and all electrical wiring are properly  

connected . 

 

- Check that the power is turned on at the junction box or circuit breaker. 

 

- Check that the wiring between the switch control and the control board are 

connected properly .

The range hood vibrates when the fan is operating .

 

- Check that the range hood has been secured properly to the wall . Tighten 

into position, if necessary .

 

- Check that the motor is secured in place . If not, then tighten the motor in 

place .

 

- Check that the fan is not damaged . If so, replace the fan .

The fans seem weak .

 

- Check that the duct size used is at least 6 in . (152 mm) round . The range 

hood will not function efficiently with insufficient duct size. 

 

- Check that the duct is not clogged with debris and the tight mesh on the 

wall cap, if applicable, isn’t restricting air flow.

 

- Check that the damper unit is opening properly .

 

- Check that no birds or animals have nested in the duct . 

The lights work, but the fan is not spinning, is stuck, or 
is rattling .

 

- The thermal protection system detects if the motor is too hot to operate and 

shuts the motor down . In this case, the motor will function properly after 
the thermal protection system cools down (after approximately 10 min.).

 

- Check that the fan isn’t jammed or scraping the bottom . 

 

- If nothing else works, the motor may be defective or seized . If so, replace 

the motor .

The range hood is not venting properly .

 

- Check that no birds or animals have nested in the duct .

 

- Check that the distance between the cooktop and the bottom of the range 

hood is between 18 in .–32 in . (458 mm–813 mm) .

 

- Check that duct work follows all requirements . Use round metal duct work 

with a uniform diameter of 6 in . (152 mm) . The length of duct work must 

not exceed 35 ft (10.7 m). Reduce the length of duct work and the number 

of elbows if necessary . Ensure that all joints are properly connected, sealed, 

and taped .

 

- Check that the duct does not open against the wind .

 

- Ensure that the power is on high speed for heavy cooking .

 

- Wind from opened windows or doors may affect the performance of the 

range hood. Close all windows and doors to eliminate outside air flow.

 

- To enhance the performance of the range hood, open slightly a window on 

the opposite side of the house where the range hood vents outdoors .

The light does not work .

 

- Check to see if light bulb is burnt . If so, replace .

 

- Check the light bulb to see if it is loose . If so, tighten .

 

- Remove the problem bulb and insert one you know is working . If the 

properly functioning light does not come on, the problem may be the light 
assembly . Have the light assembly serviced or replaced .

 


background image

 17 CONGLOMKB .COM
 

 

Please contact 1-877-333-0098 for further assistance.

Specifications

 

 
 

Model

Dimensions

Rating

Speeds

CFM

Control Type

Illumination

Venting Options

QR034

29.8 in. (757 mm) W

120 V / 
60 Hz / 

3 .6A 

High

700 ± 

10%

Push Button / 

LCD Switch

2 x Max. 25 W or 35 W /  

JDR 16, GU10 twist and 

lock base light bulb 

Top venting 

18 in . (458 mm) D

Medium

10 in. (254 mm) H

Low

WIRING DIAGRAM

O N

L

35W/JDR 16

Gu10 Light

Motor

Control Board

Black

Black

Yellow & Green

White

White

White

Black

Control Panel

White

Grey

Blue

Grey

Red

Red

Black

Black

Brown Blue

Yellow

Yellow Orange

Capacitor

20uf 330V AC

CTN2

CTN1

CTN3

 


background image

 18
 

Service Parts

If you are missing parts or if you require replacement parts, please call our customer service team at 1-877-333-0098 (8:30 a.m.– 5 p.m., 
EST, Monday–Friday) . Identify the required part(s) and have the part description(s) ready .

E

C

F

D

G

AA

BB

A

B

 

Part Code

Description

Quantity

A

QHR142

Control board

1

B

QHR143

Control panel

1

C

QHR144

Capacitor

1

D

QHR121

Light

2

E

QHR123

Light base

2

F

QHR141

Fan

1

G

QHR117

Baffle Filter

2

AA

QHR137

Screw – M4 mm x 16 mm

8

BB

QHR139

Screw - M5 mm x 12 mm

6

 


background image

Questions, problems, missing parts?  

Before returning to the store, call Customer Service 

8:30 a.m.–  5 p.m., EST, Monday–Friday

1-877-333-0098

CONGLOMKB .C0M

Retain this manual for future use .