PDF User Manual

  1. Home
  2. Manuals
  3. 909 T12ID4 Instruction Manual

909 T12ID4 Instruction Manual

Made by: 909.0
Type: Instruction Manual
Category: Impact Driver
Pages: 16
Size: 2.01 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

Environmental protection 

1

Description of symbols 

1

Know Your Tool 

2

Specifications 

2

Operating Instructions 

3

Battery & Charging Procedure 

3

TSG, Sleep Mode, Activating Tool,  

Forward/Reverse, Variable Speed 

4

LED worklight, Power Consumption LED  

Belt Clip, Temperature & Low voltage cut out, Hex chuck 

5

Installing/removing bits, Tightening Torque,  

Fastening with Screws 

6

Running Nuts and Bolts, General safety instruction  

7-12

General Maintenance        

12

Parts List                             

14

CONTENTS

 

Description of symbols

The rating plate on your tool may show symbols. These represent 

important information about the product or instructions on its use.

 

Wear hearing protection  

                     Wear eye protection  

 

Wear breathing protection

 

Double insulated for additional protection.

 

Conformance to use the ETL mark  

 

and complies with relevent standards

 

Conforms to relevant Electrical Stds and 

 

electromagnetic requirements in Australia.

 

Read the instruction manual

 

Waste electrical products should not be  

 

disposed of with household waste.

 

Conforms to relevant legislation and  

 

safety standards.

 

Conforms to relevant GS Legislation 

 

and safety Stds

 

Indoor use

 

MEPS Energy Performance Mark.

 

Li ion Battery recycle. Do Not dispose 

 

of in house hold waste.

 

Max.use temperature 

 

 

 

Conforms to relevant standards for 

 

electromagnetic compatibility.

Environmental protection

Recycle unwanted materials instead of disposing of 

them as waste. All tools, hoses and packaging should 

be sorted, taken to the local recycling centre and 

disposed of in an environmentally safe way.

This manual covers all T12 Series Impact Drivers but is illustrated  

with the 4A/h pack option for illustration purposes only.

T12ID4 Impact Driver

5424

 


background image

2

For further detailed up to date  

specifications and for Warranty details,  

visit our website at 909.com

Specifications

Motor:  

12 V

Impact Driver /  

Wrench speed:      0 - 2300 min

-1

Impact Rate:  

3000 BPM

Max. torque:         100Nm, 885 in-lbs
Chuck Collet Hex:   6.35mm (1/4)
Battery:              TB12 Series Lithium-Ion     
Model #
TB122A     

12V  

2Ah 

TB1225A   

12V  

2.5Ah 

TB123A 

12V  

3Ah 

TB124A 

12V  

4Ah 

TB125A      

12V  

5Ah

Charger type:    

Model 7110 

 

Input: 100 – 240Vac 

 

50/60Hz 65W 

 

Output: 12 V 

Charging time:  

Approx 60 min - 4Ah Battery 

 

Approx 30 min - 2Ah Battery

Know Your Tool

1.

5.

11.

2.

3.

4.

6.

7.

10.

9.

8.

1. Chuck
2. LED worklight
3. Forward Touch Pad
4. Reverse Touch Pad
5. Power Consumption LED
6. Battery release button
7. Rechargeable Lithium-ion battery pack
8. Charger
9. Charging status indicator
10.  Detachable cable & plug
11. Accessory mount

 


background image

3

OPERATING INSTRUCTIONS

WARNING! 

• Do not allow familiarity with tools to make you careless. 

Remember that a careless fraction of a second is enough 

to cause serve injury.
• Before attempting to use this cordless Impact driver, 

become familiar with all of its operating features and 

safety requirements. 
• To reduce the risk of serious personal injury, turn 

tool off and disconnect battery pack before making 

any adjustments or removing/installing attachments or 

accessories.

CHARGING PROCEDURE

• Connect the plug cable to the charger, and then plug into an 

appropriate outlet before inserting 
battery pack. After approx 5 sec, all three 
charging lights will be on for two seconds 
and then off, indicating power is available 
at the charger. 

(fig. A)

 

• Insert the battery pack into the charger, 

making sure the pack is fully seated in the 
charger.  The charging process has now 
begun. 

(fig. B)

 

During the charging process, the charging 

lights will indicate the charging status as 

below: 
-  Less than 30% charged, all three charging 

lights will blink in sequence.

-  Less than 60% charged, one light will 

stay on, while the other two lights will 
blink in sequence. 

-  Over 60% charged, two lights will stay on, while the remaining 

light will blink continuously.      

-  Fully charged, all three lights will remain on continuously. 
•  As a guide, the charging process will be last approximate 30 min 

for a 2Ah Battery Pack and approx 60 min for a 4Ah battery pack, 
and will be displayed by permanent lighting of all three charging 
lights. 

CHARGER DIAGNOSTICS

The charger is designed to detect certain problems 

that can arise with battery packs. 

• When the charger detects a battery pack that is overheated, all 

three charging light will blink at the same time. Please remove the 
battery and allow it to cool down for 15 – 30 minutes and re-insert.

• When the charger detects malfunction in the battery or the charger, 

two charging lights will blink at the same time. Please remove 
the battery and allow to cool down for 15-30 minutes. Then re-
insert the battery pack into the charger, if two charging lights still 
flashes, the battery or charger may require service. 

NOTE:

 

Charging times maybe longer depending on the 

surrounding temperature and battery conditions.

FITTING AND REmOvING THE bATTERy PACk  
TO THE DRIvER

• To install the battery pack to the tool, align 

the raised portion of the battery pack with 
the grooves on the bottom of the drill, and 
slide it firmly into the handle until you 
hear the lock snap into place. 

(fig. C)

• To remove the battery pack from the tool, 

press the battery pack release button and 
slide the battery pack completely out of 
tool handle. 

bATTERy CHARGING

CAUTION!

 

•  Before attempting to charge the battery, check the 

charger and the battery to ensure the charging 

equipment matches the battery supplied. The 

components are all labeled with component numbers. 

•  The rechargeable battery is not fully charged on leaving the 

factory. Charge the rechargeable battery before first use. 

•  Recharge discharged batteries as soon as possible 

after use or battery life may be greatly diminished. For 

longest battery life, do not discharge batteries fully. 

•  The working temperature of the charger is 0 degree to 

45 degrees (32 degree f to 115 degree f). 

A

C

B

 


background image

4

TOUCH SENSOR GRIP POwER TOOl 

Congratulations on purchasing a Touch Sensor Grip (TSG) Power 

tool. The TSG system incorporates a fully electronic control system 

which operates the tool on pressure applied to the Touch area, 

instantaneously allowing operation between Forward and reverse.

Tools fitted with TSG are truly a left and right handed tool, easy to 

operate and is the latest technology in Power Tool development

 

TOUCH SENSOR GRIP  (TSG)

CAUTION!

 

Your 12V 909  

impact driver is equipped with 

the innovative TSG System. It is 

important to read and understand 

the following instructions to get 

the best use of the TSG system. 

(fig. D)

 

ACTIvATE THE TOOl

•  Fit the tool with a fully charged battery pack by following the section 

Fitting and removing the battery pack to the driver on page 3.

•  Hold the tool naturally, with your index finger on the Forward Touch 

Pad and the middle finger on the Reverse Touch pad.  

•  Firmly press the Forward and Reverse Touch Pad at the same time 

to activate the tool. Both LED work light 
and Power Consumption LED will light up 
to indicate a successful activation. 

(fig. E)

  

•  Release the fingers from Forward and 

Reverse Pad. The tool is awakened from 
the sleep mode and ready for use. 

SlEEP mODE

•  To avoid accidental start, the tool will automatically enter sleep 

mode if the user does not operate the tool within any 5 min interval  

•  In the case where the tool has not been used for the 5 min period, 

the tool needs to be re activated to allow the remaining functions 
of the driver to be used. To activate the tool, please follow the 
section above, Activate the tool.

FORwARD AND REvERSE

CAUTION!

 To prevent damage to the gears, always 

allow the chuck to come to a complete stop before 

changing the direction of rotation.

• The unique TSG System allows quick and single handed change 

between forward and reverse.  For forward mode, simply apply 
pressure the Forward Touch Pad area.  To switch to reverse mode, 
simply release you finger from Forward 
Touch Pad and pressure the Reverse 
Touch Pad area instead.   

(fig. F)

 

• 

 

Applying screws, nuts and other fasteners 
in general uses the forward mode. The 
reverse mode is intended for the removal 
of screws, nuts and other fasteners.

vARIAblE SPEED

CAUTION:

 

The variable speed control function is NOT 

intended to be used for long periods of time during the 

operation of the task being performed. Use the variable 

speed to start screwing tasks, and then fully press the 
switch once the task has started.  

• The TSG system enables the user to adjust the speed of the driver 

effortlessly. The speed varies according to the amount of pressure 
is applied on the Touch pad area in either forward or reverse. The 
higher the pressure applied, the higher speed of the driver.

• To stop the driver, release the finger from the Forward or Reverse 

Touch Pad area and allow the chuck to come to a complete stop. 
The electric brake quickly stops the chuck from rotating.  This 
feature engages automatically when fingers are released from TSG 
system in either forward or reverse

NOTE:

 For speed control, there is no need to squeeze hard on the 

Touch Pad.  The innovative technology can detect small changes of 
pressure applied and adjust the speed accordingly. 

NOTE: 

This driver is equipped with an electric brake. When the brake 

is functioning properly, sparks may be visible through the vent slots 

in the housing. This is normal and is the action of the brake. 

First time users to familiarise themselves with the sensitivity of the 

TSG should squeeze the Touch area and experience the functions 

before fitting a drill or driver bit.

D

F

E

 


background image

5

lED wORklIGHT

When the unit is switched on, the LED worklight also comes on to 

ensure better vision and to make working in dark areas safer. The 
worklight goes out when the TSG system is released.

POwER CONSUmPTION lED

This LED indicates the amount of battery power available for your 

task. At activation the LED will glow as detailed below. 

During operation the LED will alter according to the amount of load 
being applied.
• Green light: the battery remaining power is above 60%
• Yellow light: the battery remaining power is between 30% to 60%. 
• Red light: The battery remaining power is less than 30%.  

Re-charge the battery as soon as possible.   

bElT ClIP

The belt clip is used to assist to 

clip the tool to your waist belt 

while working. Install the clip to 

the driver by locating the belt clip 

tabs in the slots in the driver and 

tighten the screw to fix the clip 

firmly. (fig. H) 

CAUTION! 

•  When using the belt clip, ensure the tool is secure and 

cannot drop from the waist belt. If the power tool is 

dropped, it may lead to an accident.

•  When carrying the tool when hooked to your waist belt, 

do not fit any type of accessory to the chuck of the 
power tool, it may lead to accidental injury. 

TEmPERATURE CUT OUT

If the driver is constantly overloaded, or the driver is used constantly 

at maximum rating in high ambient conditions, the battery cells 
may over heat causing the battery pack to shut down. 

When this 

occurs you will need to immediately stop driving and 

allow the battery cells to cool.

NOTE: 
• The driver will not restart until the battery pack 

has cooled.

 To reduce the temperature of the cells remove the 

battery pack from the driver and place the battery pack in a free 
air environment, out of direct sunlight or any other heat source.

• DO NOT force cool the pack in any way. 

Do not place in 

refrigerators or freezers. When the battery pack has cooled down it 
can again be used to operate the driver, as long as the load or the 
conditions causing the original excessive temperature has been 
corrected.

lOw vOlTAGE CUT OUT

This tool is fitted with a low voltage cut out feature to assist in 

providing a long life to the battery.

When the battery is close to the pre-set minimum low voltage level, 

the power consumption LED will be red and the tool will turn off.

You will then need to insert either a fully charged battery pack into 

the driver or recharge the existing battery pack.

Note:

 Attempting to restart the tool without either recharging the 

battery or installing another battery (with charge) will lead the driver 

restarting and then stopping again, after only a few seconds of 

operation.

ImPACT DRIvER HEx CHUCk

The Touch Impact driver is supplied with an impact driver  

collect chuck. 

The chuck is designed to use standard 6.35mm (1/4 inch ) 

screwdriver and nut driver bits.

When purchasing screwdriver and nut drivers the highest  

quality accessories are recommended.

Bits with a machined undercut provide the best fitment into the collet.

Note:

  If bits are used without the undercut machined in the driver 

bit, there is NO re tension of the bit, and the bit can fall free from the 

chuck without releasing the chuck sleeve. 

It is always better to use bits with the machined undercut.

H

 


background image

6

INSERTING A DRIvER OR NUT SETTER bIT 
INTO THE ImPACT DRIvER ATTACHmENT

WARNING!

 Do not insert or remove bits while the tool is 

activated.  Make sure the battery pack is removed or the tool is in 

sleep mode when inserting or removing bits.
1.  Your tool is equipped with a quick release 

chuck. To insert an accessory, simply 

pull the locking sleeve forward, insert the 

desired accessory fully into the chuck and 
release the locking sleeve. 

(Fig G)

2.  To remove an accessory, pull the locking 

sleeve forward and simply remove the 

accessory from the chuck.

3.  To avoid loss of control, ensure the bit is locked into the chuck by 

pulling on the bit after it has been inserted and the locking sleeve 

released.

The technique is to start slowly, increasing the speed as the screw 

runs down.  Set the screws snugly by slowing to a stop.  Prior to 

driving screws, the right impacting/tightening duration can be 

reached in less than 0.5 seconds.  Therefore, work with low RPM and 

switch the machine off immediately when the screw is tight and the 

impacting sound is heard.
For screwing larger, longer wood screws into hard material,  

pre-drilling is the best method.

TIGHTENING TORqUE

The tightening torque depends on the duration of the impacting/

tightening action.  The largest tightening torque is achieved after 

approx. 6 to 10 seconds impacting/tightening action.  The torque 

build up depends on the following factors:
• Hardness of the bolts/nuts. 

• Type of washer (disk washer, spring washer, seal). 

• Hardness of the material to be joined. 

• Lubricating effect at the surfaces of the junction.
This leads to the following application cases:

Hard case:

 The joining of metal to metal with a disk washer.   

The maximum torque is reached after a relatively short impacting/

tightening action.

Medium case: 

The joining of metal to metal where the spring 

ring washer, disk spring washer, stud bolts or bolts/nuts with conical 

seats are used.

Soft case: 

The joining of e.g metal to wood or insulation material.

For middle or soft joining cases, the maximum tightening torque is 

less than for hard cases.  Therefore, a longer impacting/tightening 

action is necessary to arrive at the maximum tightening torque.

FASTENING wITH SCREwS

This procedure will enable you to fasten materials together with your 
tool without stripping, splitting or separating the material 

(fig I)

Note:

 Always use a test piece to determine the correct time to allow 

the impact driver to impact. The longer the impact time when seating 

the screw, the higher the torque being applied. Small screws can 

easily strip or shear if over tightened.
The following is a guide  but application will vary between screws 

and materials being screwed together.
The most IMPORTANT point is to learn the impact time when seating 
the screw.

First, 

clamp the pieces together and drill the first hole 2/3 the 

diameter of the screw.  If the material is soft, drill only 2/3 the proper 

length.  If it is hard, drill the entire length.

Second,

 unclamp the pieces and drill the second hole the same 

diameter as the screw shank in the first or top piece of wood.

Third,

 if flat head screw is used, countersink the hole to make the 

screw flush with the surface.  Then, simply apply even pressure 

when driving the screw.  The screw shank clearance hole in the first 

piece allows the screw head to pull the pieces tightly together.

I

G

 


background image

7

RUNNING NUTS AND bOlTS

Variable speed control must be used with caution for driving nuts and 

bolts with socket set attachments.  The technique is to start slowly, 

increasing speed as the nut or bolts run down.  Set the nut or bolt 

snugly by allowing the impact driver to impact the nut to the desired 

torque. This is a achieved by the time the impact driver is allowed to 

impact the nut.  A very short impact of say 0.5 seconds will be a low 

torque.  An impact of 5 seconds will result in a very high torque.  It is 

ALWAYS advisable to test the torque and determine what time frame is 

required to achieve the desired result.
wARNING.  This impact driver is capable of tightening fasteners to 

a very high torque. Over tightening can result in shearing bolts and 

screws, especially if low quality fasteners are used. Do Not over tighten 

fasteners and impact only to achieve the desired torque. 

General safety instructions for handling 
power tools (European locations)

WARNING! 

Read all safety warnings and all 

instructions. Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury.

This unit may not be used by people (including children) with reduced 

physical, sensory or mental capacities, with a lack of experience and 

without the appropriate knowledge, unless they are supervised by 

someone who is responsible for their safety or have been instructed by 

such a person with regard to how the unit is to be operated.
Children should be supervised to ensure that they do not play with the 

device.

Save all warnings and instructions for  
future reference

1). WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite 

accidents. Rags, cloths, cord, string and similar items should never 
be left around the work area

•  Do not operate power tools in explosive environments, such as in 

the presence of flammable liquids, gases, or dust. Power tools create 
sparks, which may ignite the dust or fumes. 

• Keep children and bystanders away while operating a power tool. 

Distractions can cause the operator to lose control.

2). ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in 

any way. Do not use any adapter plugs with grounded power tools. 
Unmodified plugs and matching outlets will reduce risk of electric 
shock.

• Avoid body contact with grounded surfaces such as pipes, radiators, 

ranges and refrigerators. There is increased risk of electric shock if 
your body is grounded.

• Do not expose power tools to rain or wet conditions. Water entering a 

power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or 

unplugging the power tool. Keep cord away from heat, oil, sharp 
edges or moving parts. Replace damaged cords immediately. 
Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors,use an extension cord suitable 

for outdoor use.Use of a cord suitable for outdoor reduces the risk of 
electric shock. 

•  To reduce the risk of electric shock, the manufacturer recommends 

the use of a residual current of 30mA or less at all times.

3). PERSONAL SAFETY 

•  To reduce the risk of electric shock, the manufacturer recommends 

the use of a residual current of 30mA or less at all times.

• Stay alert, watch what you are doing and use common sense when 

operating a power tool. Do not use a power tool while you are tired 
or under the influence of drugs, alcohol or medication. A moment 
of inattention while operating power tools may result in serious 
personal injury.

• Use personal protective equipment. Always wear eye protection. 

Protective equipment such as dust mask, non-skid safety shoes, 
hard hat, or hearing protection will reduce personal injures.

• Prevent unintentional starting. Ensure the switch is in the “off” 

position before connecting to power source and/or battery pack, 
picking up or carrying the tool. Carrying power tools with your finger 
on the switch or energising power tools that have the switch on 
invites accidents.

• Remove any adjusting key or wrench before turning the power tool 

on. A wrench or key left attached to a rotating part of the power tool 
may result in personal injury.

 


background image

8

• Do not overreach. Keep proper footing and balance at all times. This 

enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery. Keep your 

hair, clothing and gloves away from moving parts. Loose clothes, 
jewellery or long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and 

collection facilities , ensure these are connected and properly used. 
Use of dust collection can reduce dust-related hazards.

4). POWER TOOL USE AND CARE

• Do not force the power tools. Use the correct power tool for your 

application. The correct power tool will do the job better and safer at 
the rate for which it was designed.

• Do not use the power tool if the switch does not turn it “on” and 

“off”. Any power tool that cannot be controlled with the switch is 
dangerous and must be repaired.

• Disconnect the plug from the power source and/or the battery pack 

from the power tool before making any adjustments, changing 
accessories, or storing power tools. Such preventive safety measures 
reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow 

persons unfamiliar with the power tool or these instructions to 
operate the power tool. Power tools are dangerous in the hands of 
untrained users.

• Maintain power tools with care. Check for misalignment or binding 

of moving parts, breakage of parts and any other condition that 
may affect the power tool’s operation. If damaged, have the power 
tool repaired before use. Many accidents are caused by poorly 
maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools 

with sharp cutting edges are less likely to bind and are easier to 
control.

• Use the power tool, accessories and tool bits etc. in accordance 

with these instructions, taking into account the working conditions 
and the work to be performed. Use of the power tool for operations 
different from those intended could result in a hazardous situation.

5). USE AND CARE OF THE BATTERY PACK

• Verify that the switch is in the “off” position before inserting the 

battery pack. Inserting the battery pack into a power tool that has 
the switch in the “on” position invites accidents

• Recharging only with the charger specified by the manufacturer. A 

charger that is suitable for one type of battery pack may create a 

risk of fire when used with another battery pack.

• Use power tools only with specifically designated battery packs.Use 

of any other battery packs may create a risk of injury and fire.

• When the battery pack is not in use, keep it away from other metal 

objects ,like paper clips, coins,keys, nails, screws or other small 
metal objects that can create a connection between the terminals.  
Shorting the battery teminals together may cause bums or a fire.

• Avoid contact with any liquid that is emitted by a batttery. If the 

battery pack is abused, liquid may escape from the battery. Liquid 
emitted from the battery may cause irritation or burns. If liquid 
comes into contact with the skin, wash the area immediately with 
soap and water, and then neutralize the liquid with lemon juice or 
vinegar. If contact occurs, rinse thoroughly with running ater. If liquid 
comes into contact with the eyes, rinse thoroughly with running 
water and seek medical help.

• Store battery pack in well ventilated, dry and cool conditions, and 

avoid direct sunlight and rain.

6). SERVICING

• Have your power tool serviced by a qualified repair person using only 

identical replacement parts. This will ensure that the safety of the 
power tools is maintained.

SAFETy wARNINGS FOR CORDlESS DRIllS 

• Wear ear protectors when impact drilling. Exposure to noise can 

cause hearing loss.

• Hold power tools by insulated gripping surface ,when performing 

an operation where the cutting accessory or fastener may contact 
hidden wiring. Cutting accessory and fasteners contacting a “live” 
wire may make exposed metal parts of the power tool “live” and 
could give the operator an electric shock.

• Use appropriate detectors to determine if utility lines are hidden in 

the work area or call the local utility company for assistance. Contact 
with electric lines can lead to fire and electric shock. Damaging 
a gas line can lead to ecplosion.Penetraing a water line causes 
property damage or may cause an electric shock. 

• Switch off the power tool immediately when the tool inserts jams. Be 

prepared for high reaction torque that can cause kickback. The tool 
inserts jams when: 

 

the power tool is subject to overload or

 

it becomes wedged in the workpiece.

• Hold the machine with a firm grip. High reaction torque can briefly 

occur while driving in and loosening screws. 

 


background image

9

• Secure the workpiece. A workpiece clamped with clamping devices 

or in a vice is held more secure than by hand.

• Keep your workplace clean. Blends of materials are particularly 

dangerous.Dist from light alloys can burn or explode. 

• Do not open the battery. Danger of short-circuiting. 

• In case of damage and improper use of the battery, vapours may 

be emitted Provide for fresh air and seek medical help in case of 
complaints. The vapours can irritate the respiratory system. 

• Use the battery only in conjunction with this power tool. This 

measure alone protects the battery against dangerous overload.

• Use only original 909 batteries with the voltage listed on the 

nameplate of your power tool. When using other batteries, e.g, 
imitations, reconditioned batteries or other brands, there is danger of 
injury as well as property damage through exploding batteries. 

ADDITIONAl INSTRUCTIONS FOR wORk wITH 
THE bATTERy/CHARGER

WARNING:

 If the battery pack is cracked or damaged 

in any other way, do not insert it in the charger. There is a 

danger of electric shock.

WARNING:

 Do not allow any liquid to come into contact 

with the charger. There is a danger of electric shock. 

• Before using the charger, read all the instructions and cautionary 

markings on the charger and battery pack as well as the instructions 
on using the battery pack.

• Keep the charger away from rain or damp. Water entering into the 

charger will increase the risk of an electrical shock,

• Only use chargers recommended by the manufacturer to recharge 

the battery. When using a charger designated for a particular type of 
battery, there is a risk of fire if it is used with other batteries.

• Never use to recharge third-party batteries. The charger is only 

designed to charge the supplied batteries (Li-Ion) using the voltages 
specified in the Technical Data. Otherwise there is a risk of fire or 
explosion.

• Keep the charger clean. Contamination will increase the risk of an 

electrical shock.

• Check the charger, cable and plug each time you use the unit. Do 

not use the charger if you find any damages. Never open the charger 

up yourself, have it repaired by a qualified specialist only and with 
original replacement parts. A damaged charger, cable or plug will 
increase the risk of an electrical shock.

• Never operate the charger on a surface that will burn easily (for 

example, paper, textiles etc) or in a flammable environment. There 
is a risk of fire occurring as a result of the heat generated during the 
charging process.

• Fluid can escape from the battery when used incorrectly. Avoid all 

contact with this. In the event of accidental contact, rinse with water. 
If liquid should get into the eyes, get medical assistance. Battery fluid 
may result in skin irritations and burns.

• Do not open the battery. There is a risk of short-circuiting.

• Protect the battery from heat, for example, from constant sun and 

fire. There is a risk of explosion.

• Never short circuit the battery. There is a risk of explosion.

• In the event of damages and incorrect use, vapours may come out of 

the battery. Ensure plenty of fresh air and, if you have any symptoms, 
consult a doctor. These vapours may irritate the respiratory system. 

General safety instructions for handling 
power tools (North America)

WARNING!

•  Before operating this tool, carefully read this Instruction 

Manual and all of the labels affixed to the tool. Failure to 

follow all warnings and instructions may result in electric 

shock, fire and/or serious injury. 

•  The term “power tool” in the warnings refers to your 

mains operated (corded) power tool or battery operated 

(cordless) power tool.

• Save all warnings and instructions for future reference.

WARNING!

Some dust created by power sanding, sawing, grinding, 

drilling and other construction activities contains 

chemicals known to the state of California to cause 

cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
•  Lead from lead-based paints.
•   Crystalline silica from bricks, cement, and other masonry 

products.

•   Arsenic and chromium from chemically treated lumber.

 


background image

10

your risk from these exposures varies, depending upon 

how often you do this type of work.
To reduce your exposure to these chemicals:
•   Work in a well-ventilated area.
•   Work with approved safety equipment, such as 

dust masks that are specially designed to filter out 

microscopic particles.

•   Avoid prolonged contact with dust from power sanding, 

sawing, grinding, drilling, and other construction 

activities. Wear protective clothing and wash exposed 

areas with soap and water.

Allowing dust to get into your mouth or eyes or to lie on 

the skin may promote absorption of harmful chemicals.

work area safety

• 

Keep work area clean and well lit. 

Cluttered or dark areas 

invite accidents. Rags, clothes, cords, strings and similar items 
should never be left around the work area.

  

Do not operate power tools in explosive environments,

 

such as in the presence of flammable liquids, gases, or dust. Power 
tools create sparks, which may ignite the dust or fumes.

• 

Keep children and bystanders away while operating a 

power tool.

 Distractions can cause the operator to lose control.

Electrical safety

• 

Power tool plugs must match the outlet. 

Never modify the 

plug in any way. Do not use any adaptor plugs with grounded power 
tools. Unmodified plugs and matching outlets will reduce risk of 
electric shock.

• Avoid body contact with grounded surfaces such 

as pipes, radiators, ranges and refrigerators. There 

is an increased risk of electric shock if your body is 

grounded.

• 

Do not expose power tools to rain or wet conditions.

 

Water entering a power tool will increase the risk of electric shock.

• 

Do not abuse the cord. Never use the cord for carrying, 

pulling or unplugging the power tool. 

Keep the cord away 

from heat, oil, sharp edges or moving parts. Replace damaged cords 
immediately. Damaged or tangled cords increase the risk of electric 
shock.

• 

When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

 If operating a power tool in a damp location is 

unavoidable, use a residual current device (RCD) 

or ground fault circuit interrupter (GFCI) protected 

supply.

 Use of an RCD or GFCI reduces the risk of electric shock.

Personal safety

 Stay alert, watch what you are doing and use common 

sense when operating a power tool. 

DO NOT use a power 

tool while you are tired or under the influence of drugs, alcohol or 
medication. A moment of inattention while operating power tools 
may result in serious personal injury.

• 

Use personal protective equipment. Always wear eye 

protection. 

Protective equipment such as a dust mask, non-skid 

safety shoes, a hard hat, or hearing protection will reduce personal 
injuries.

• 

Avoid accidental starting. 

Ensure the switch is in the “off” 

position before connecting to a power source and/or battery pack, or 
picking up or carrying the tool. Carrying power tools with your finger 
on the switch or plugging in power tools that have the switch “on” 
invites accidents.

• 

Remove any adjusting key or wrench before turning 

the power tool on.

 A wrench or key left attached to a rotating 

part of the power tool may result in personal injury.

• 

Do not overreach.

 Keep proper footing and balance at all 

times. This enables better control of the power tool in unexpected 
situations.

• 

Dress properly. 

Do not wear loose clothing or jewellery. Always 

wear eye and ear protection and use a dust mask. Keep your hair, 
clothing and gloves away from moving parts. Loose clothes, jewelry 
or long hair can be caught in moving parts.

• 

If devices are used for dust extraction and collection, 

ensure these devices are connected and used properly. Use of dust 
collection devices can reduce dust-related hazards.

• 

Do not use on a ladder or unstable support.

 Stable 

footing on a solid surface allows for better control of the power tool 
in unexpected situations.

 


background image

11

Power tool use and care

• 

Do not force the power tool.

 Use the correct power tool for 

your application. The correct power tool will do a better and safer job 
if used for the function it was designed for. 

• 

Do not use the power tool if the switch does not turn 

it on and off.

 Any power tool that cannot be controlled with the 

switch is dangerous and must be repaired.

• 

Disconnect the plug from the power source and/or 

the battery pack from the power tool before making 

any adjustments, changing accessories, or storing the 

power tool. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.

• 

Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool 

or these instructions to operate the power tool.

 Power 

tools are dangerous in the hands of untrained users.

• 

Maintain power tools with care.

 Check for misalignment or 

binding of moving parts, breakage of parts and any other condition 
that may affect the power tool’s operation. If damaged, have the 
power tool repaired before use. Many accidents are caused by poorly 
maintained power tools.

• 

Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind and are 
easier to control.

• 

Use the power tool, accessories, tool bits, etc., in 

accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations different from 

those intended could result in a hazardous situation.

battery tool use and care

• 

Ensure the switch is in the "off" position before 

inserting the battery pack.

 Inserting the battery pack into 

power tools that have the switch "on" invites accidents.

• 

When recharging, use only the charger that is 

specified by the manufacturer. 

A charger that is suitable for 

one type of battery pack may create a risk of fire when used with 
another battery pack.

• 

Use only specifically designated battery packs with 

power tools. 

The use of any other battery pack may create a risk 

of injury or fire.

• 

When the battery pack is not in use, keep it away 

from objects that can create a connection between 

the terminals, such as paper clips, coins, keys, nails, 

screws or other small metal objects.

 Short-circuiting the 

battery terminals may cause burns or a fire.

• 

Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. 

If contact accidentally occurs, 

flush with water. If liquid contacts eyes, seek medical help. Liquid 
ejected from the battery may cause irritation or burns.

Service

• 

Have your power tool serviced by a qualified repair 

person 

using only identical replacement parts. This will ensure that 

the safety of the power tool is maintained.

• 

When servicing a tool, use only identical replacement 

parts. 

Follow the instructions in the Maintenance section of this 

manual. The use of unauthorized parts or failure to follow maintenance 
instructions may create a risk of electric shock or injury.

 


background image

12

Specific safety rules for cordless drill/driver 

• Hold power tool by insulated gripping surface when performing an 

operation where the cutting tool may contact hidden wiring or its 
own cord. Contact with a “live” wire will also make exposed metal 
parts on the tool “live” and shock the operator.

• Wear hearing protection during extended periods of operation. 

Exposure to noise can cause hearing loss.

• Use auxiliary handle(s), if supplied with the tool. Loss of control can 

cause personal injury.

• Wear safety goggles or other eye protection. Hammering and drilling 

operations cause chips to fly. Flying particles can cause permanent 
eye damage. 

• Use a dust mask or respirator for applications if the operation  

is dusty.

• Secure the workpiece. Clamping devices or a vise will hold the 

workpiece in place better and more safely than holding it by hand. 

• Be aware that this tool is always in an operating condition, since it 

does not have to be plugged into an electrical outlet. 

• Accessories and tool may get hot during operation. Wear gloves 

when handling them if performing heat producing applications such 
as drilling metals.

Safety rules for battery pack and charger

WARNING!

 This manual contains important safety and 

operating instructions for your battery and charger. Before 

using the charger, read all instructions and warnings on the 

charger, the battery pack and the tool.

• If the battery pack casing is cracked or damaged, do not insert into 

charger. There is a danger of electric shock or electrocution.

• Don

,

t allow any liquid to get inside charger. Electric shock may result. 

To facilitate cooling of the battery pack after use, avoid placing the 
charger or battery pack in a warm environment such 

• Never attempt to open the battery pack for any reason. If the plastic 

housing of the battery pack breaks or cracks, immediately 

• Never attempt to open the battery pack for any reason. If the 

plastic housing of the battery pack breaks or cracks, immediately 
discontinue use and do not recharge.

• The length of service from your battery will depend on the type 

of work you are doing. The battery has been designed to provide 
maximum trouble-free life. However, like all batteries, it will 
eventually wear out.

• To obtain the longest possible battery life, we suggest the following:

- Store and charge your battery in a cool area. Temperatures above or 

below normal room temperature will shorten battery life.

- Never store the battery in a discharged condition. Recharge it 

immediately after it has been discharged.

• All batteries gradually lose their charge. The higher the temperature, 

the quicker they lose their charge. If you store your tool for long 
periods of time without use, recharge the battery every month or 
two. This practice will prolong battery life.

battery pack removal and preparation for recycling

To preserve natural resources, please recycle or dispose of batteries 

properly. This product contains a lithium-ion battery. Local, provincial or 

federal laws may prohibit disposal of lithium-ion batteries in ordinary 

trash. Consult your local waste authority for information regarding 

available recycling and/or disposal options.

WARNING!

 Upon removal, cover the battery pack’s 

terminals with heavy-duty adhesive tape. Do not attempt to 

destroy or disassemble.

General maintenance

Avoid using solvents when cleaning plastic parts.  Most plastics are 

susceptible to damage from various types of commercial solvents and 

may be damaged by their use.  Use clean cloths to remove dirt, 

dust, oil, grease, etc.

WARNING!

•  To avoid serious personal injury, always remove the  

battery pack from the tool when cleaning or performing  

any maintenance.

•  When servicing, use only identical replacement parts.  

Use of any other parts may create a hazard or cause prod

uct damage. To ensure safely and reliability, all repairs  

should be performed by a qualified service technician.

•  It is not recommended to use compressed dry air to  

clean the driver. If cleaning with compressed air is the  

only method available, always wear safety goggles or  

safety glasses with side shields when using compressed 

 


background image

13

air to clean the tool.  If the operation is dusty, also wear  

a dust mask.

•  Do not at any time allow brake fluids,gasoline,  

petroleum - based products, penetrating oils,etc, to come 

in contact with plastic parts.  Chemicals can damage, 

weaken or destroy plastic which may result in serious  

personal injury.

batteries

The battery pack is equipped with Lithium-ion rechargeable batteries.  

The duration of use from each charge will depend on the type of work 

performed.
The batteries in this tool have been designed to provide maximum 

trouble-free life.   Like all batteries, they will eventually wear out. Do 

not disassemble the battery pack or attempt to replace the batteries. 

Handling of the batteries, especially when wearing rings and Jewelry, 

could result In a serious burn.
To obtain the longest possible battery life, read and understand the 

operator’s manual.
•  It Is good practice to unplug the Charger/Adapter and remove the 

Lithium-ion battery pack when not In use.

For lithium-ion battery pack storage longer  
than 30 days:

•  Store the Lithium-ion battery pack where the temperature Is below 

80 “F (26°C) and free of moisture.

• Store Lithium-ion battery packs in a 30%-50% charged condition.
•  Every six months of storage, fully charge the Lithium-ion  

battery pack.

• Exterior may be cleaned with a cloth or soft non-metallic brush.

battery pack removal and preparation for recycling

To preserve natural resources, please recycle or dispose of batteries 

properly.  This product contains lithium-ion batteries. Local, state, or 

federal laws may prohibit disposal of lithium-ion batteries in ordinary 

trash. Consult your local waste authority for information regarding 

available recycling and/or disposal options.

WARNING!

 Upon removal of the battery pack for 

disposal or recycling, cover the battery pack’s terminals 

with heavy-duty adhesive tape. Do not attempt to destroy 

or disassemble the battery pack or remove any of its 

components.  Lithium-ion batteries must be recycled or 

disposed of properly. Also, never touch the terminals with 

metal objects and/or body parts as a short circuit may result 

. Keep away from children.  Failure to comply with these 

warnings could result in fire and/or serious injury.

To ensure safety and reliability, all repairs should 
be performed by a qualified service Agent

waste disposal

The product must not be discarded with normal household waste.   

It must be disposed of properly.

 


background image

14

Parts list

If any parts are missing or damaged, or if you have any questions, please email us at info@909.com

 


background image

15

OTHER MODELS AVAILABLE:
12v Drill/Driver 

 


background image

909Powertools  w: 909.com  E: info@909.com    

© Globalpowerbrands International P/l 2013