PDF User Manual

  1. Home
  2. Manuals
  3. 7inova 7R200 Quick Installation Manual

7inova 7R200 Quick Installation Manual

Made by: 7inova
Type: Quick Installation Guide
Category: Card Reader
Pages: 1
Size: 0.32 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

Multimedia sharing

Currently connected to:

7inova_535060

Wi-Fi

7inova-535060

7inova-535050

Disconnect

Connected

7inova-521635

Open Network and Sharing Center

Click“Start→Control  Panel→Network  and  Internet→Network  and  Sharing  Center→Change 

adapter settings→Wi-Fi(right click)→Properties”
Double click“Internet Protocol Version 4(TCP/IPv4)” 
Select “Obtain an IP address automatically” and “Obtain DSN server address automatically”. 

Click “OK”. Back to the last interface and click “OK”

1.

2.
3.

When shows:“Connected”, 

means your computer has 

connected to wireless 

network successfully.

3

Please click on the steps to set up Windows 7 system

Windows 7

(Note: You have to get device connected wirelessly firstly then can login Web browser)

Connect To Wireless Network

2

Select the SSID of your target 

network from the displayed list 

and click“Connect”

2

After Wireless LAN card 

installed successfully, 

click        icon on the lower 

right corner of desktop.

1

(Before configuring, first ensure your PC has installed wireless LAN card)

Computer Configuration

1

1) Restore the 7R200’s configuration to its factory default settings. (With 7R200 powered on, 

press and hold the 

Reset button for about 10 seconds before releasing it).

2) To  log  in  the  Web  Management  page,  use  the  default  user  name  and  password:  admin, 

admin. To connect to the Wireless Network, use the default password on the label.
3) Try to configure 7R200 once again by following the instructions in the previous steps of the QIG.

What can I do if I forgot my password?

Appendix: Troubleshooting

Not connected

Connections are available

Wi-Fi

7inova-535060

7inova-535050

Connect

Connect automatically

7inova-521635

Open Network and Sharing Center

Connect to a Network

Type the network security key

Security Key:

Hide characters

Cancel

O K

Select the wireless 

network name 

configured in step 2, 

click “Connect” button.

1

If you encrypted wireless 

network in step 2, the 

following message will 

be displayed on web 

browser, fill in password, 

click “OK”

2

Reconnect to Router

4

3G Mode

Wire Mode

Open a web browser, type 192.168.100.1, and press Enter, 

type the password (default is admin). Click “login”.

1

According to the choice of mode for wireless parameters Settings.

2

3

Router Configurations

Connect to 192.168.100.1

3GRouter

User name:

Password:

Remember my password

Cancel

Login

Not connected

Connections are available

Wi-Fi

7inova-535060

7inova-535050

Connect automatically

7inova-521635

Open Network and Sharing Center

Information sent over this network might 

be visible to others.

Connect

Package Contents:

Before you start to use this device, please check if there’s anything 

missing in the package, and contact your dealer of purchase to claim 

for missing items:

Modem

Wireless Devices

Wireless Devices

AP

Wireless Devices

3G Lan Card

3G

3 Application Modes Introduction 

     3G Mode

Plug  3G  modem  into  the  router’s  USB  port, 

configure accordingly, computer / WI-FI phone / 

Tablet  can  connect  the  router  wired  /  wireless 

and  share  3G  internet.  Under  3G  Mode,  the 

Ethernet port is used as LAN port.

1

     Wire Mode

Under Router Mode, the Ethernet port is used 

as  WAN  port.  Connect  7R200  with  ADSL 

Modem port using RJ45 cable. Computer/WI-FI 

phone/Tablet can connect the router wirelessly 

and share internet.

2

     Wireless Client Mode

Under WISP+Bridge Mode, the router can connect 

Wireless  hotspot  or  wireless  router,  make  wired 

device wireless ready, and bridge wireless signal, 

extend wireless signal range, Create a new SSID. 

The Ethernet port is used as LAN port. To avoid 

same IP address as front-end router, users need to 

set different IP address.

3

File sharing

Download and install FTP client applications from respective app stores to phones or tablets. Thus it 

could make use of file sharing function. Popular FTP client software includes: AndFTP, elfin FTP, ES 

File Brower, etc.

1

When sharing files through FTP client software in phones or tablets, simple settings are necessary 

for the first time. In the FTP client software, server settings are: 192.168.100.1. Account and 

password are both:”admin”. Enter into media/sda directory to enjoy sharing the files from USB flash 

disk or mobile HDD.

2

Built-in with multimedia server, the product supports DLNA sharing technology, identify automatically 

and play media files like videos, music, pictures stored in the wirelessly connected USB flash disk or 

mobile HDD. Supported file formats include:

● Support tens of video formats such as MKV、avi、mp4、mov、3gp、mpeg、m4v;

● Support audio formats like LPCM、AAC、AC-3、ATRAC 3plus、MP3、WMA9;

● Support picture formats like JPEG、PNG、GIF、TIFF.

1

Terminals with player supporting DLNA installed can share multimedia playing through the device.

For instance: smart devices could stream the media files stored in USB flash disk connected to the 

product to TV screen with HDMI port with the help of fleetlink stick in the market.

2

Search out the device(by its identifier) as multimedia server in the client player and make it without 

any settings. Please refer to detailed instructions on specific software operation.

3

Popular APP software on the following platform:

● Apple platform(iPhone 、iPad、iTouch): 

Download the players supporting DLNA from App Store such as:AirPlayer, GoodPlayer, AirMusic, 

flex:player, yxplayer.

● Android platform (phones and tablets based on   android system):

Download the players supporting DLNA from App Store. For example, SoftMedia,VPlayer ,Tencent 

video,kascend music,PowerDVD.

4

Reset: If need to reset the router, press and hold WPS/RESET button for 8-10 seconds, all indicators 

will be on, release until all other LED are off except Power LED.

Cautions:

1. Disconnect the device in thunderstorms in case of lightning damage.
2. Keep far from heat source and ensure ventilation.
3. Keep waterproof in the storage, transportation and operating environment.

LED indicators’ Status Description:

For 3G USB Modem

Reset

Ethernet

USB Dongle

Lamp

Device Connection

3G USB d

ongle

To  use  3G  Mode,  plug  3G  modem  into 

USB port of 7R200.

1)

To use Wireless Client Mode, connect 7R200 

and device (Such as desktop computers) via 

RJ45 cable as following show.

3)

To  use  Wire  Mode,  plug  one  side  of  RJ45 

cable  into  7R200’s  Ethernet  port,  plug  the 

other side into Modem’s LAN port.

2)

(3G Mode is Default mode. For wireless encryption or change to Wireless Router / AP 

/ WISP + Bridge Mode, please login and setup on web browser with followed steps) 

Indicator

Name

Power Status Indicator

Ethernet Status Indicator

Wireless Status Indicator

Red On

Get Powered

Green On

Ethernet Connected

Green slow blink

Green fast blink

Wireless Function Launched

Data Transmission via wireless

Green fast blink

Data Transmission via Ethernet

Status

Description

1x 7R200 3G Wireless Travel Reader

1x 1m Ethernet cable with RJ45 connector

1x Quick Installation Guide

3G Wireless Travel Reader 150M

Quick Installation Guide

Model: 7R200

Ethernet

ADSL Modem

Telephone

line

Ethernet

Wireless Client Mode

WAN Mode Select

 3G Mode       

○ 

Wire Mode      

● 

Wireless Client Mode

Wireless client mode
SSID:
MAC:
Channel:
Safe mode:

1
Disable

WAN Mode Select

 3G Mode       

● 

Wire Mode      

○ 

Wireless Client Mode

Static IP

WAN Connection Mode:

WAN Mode Select

 3G Mode       

○ 

Wire Mode      

○ 

Wireless Client Mode

● 

PPPoE

PPPoE mode,that is ADSL dial-up networking mode:Input the 

ADSL account and password ISP provides, click “OK”.

● 

STATIC

Static  IP  networking  mode:it  is  appropriate  when  front-end 

router or ISP device uses assigned IP address. 

● 

DHCP

Dynamic  IP  address  distribution  mode:specific  IP  addresses 

are allocated automatically and dynamically between devices. 

It’s  the  initial  default  networking  mode.  Insert  a  3G  wireless 

modem (dongle) into the USB port of the device, if the blue LED 

is always on, it means a successful 3G network connection. Then 

other devices connected with this WiFi can share the 3G network 

connection.

Note:  if  the  blue  light  blinks  slowly,  it  implies  the  plugged  3G 

modem is not supported, firmware of this device may need to be 

updated. 

The  devices  support  about  150  different  3G  adapters;  contact 

your supplier if your model is not supported.

Select “Wireless client mode” in the above figure. And then click 
“start  scanning”,  and  it  should  display  nearby  APs.  Select 
preferred AP (by SSID), type its security mode and password if 
needed. Click“Apply”. 

Connection Settings

Operator
WAN Select
Dial Number
APN
User Name
Password
pin code
Auth Type
Operation Mode
Redial Period
Idle Time

5

seconds

600

seconds

Keep Alive

Auto

APN Info

Auto

Auto