PDF User Manual

  1. Home
  2. Manuals
  3. 3rd Eye Mobile Vision AWT07MLED User Manual

3rd Eye Mobile Vision AWT07MLED User Manual

Made by: 3rd Eye Mobile Vision
Type: User Manual
Category: Monitor
Pages: 24
Size: 0.79 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

Thank you for purchasing our product. 
Please read this User’s Manual before 
using the product

Change without Notice 

 

 

AWT07MLED 

7” Q TFT LCD MONITOR (LED Backlighted) 

USER MANUAL 

 

 

 

 

e

-4

 

 

 

 


background image

 

2

 

 

Federal Communications Commission (FCC) Statement 

This Equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of the FCC rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate radio 

frequency  

energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following 

measures: 

Reorient or relocate the receiving antenna.   

Increase the separation between the equipment and receiver. 

-      Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected. 

Consult the dealer or an experienced radio / TV technician for help. 

 

You are cautioned that changes or modifications not expressly approved by   

the party responsible for compliance could void your authority to operate the 

equipment. 

 

 

 

 

 

 

 

 

 

SAFETY PRECAUTIONS 

This device complies with Part 15 of the FCC Rules.    Operation is subject to the 

following two conditions:   

(1) This device may not cause harmful interference and, 

(2) This device must accept any interference received, including interference       

that may cause undesired operation 

 


background image

 

3

 

 

Safety Precaution.………………………....…………………………………………..........2 

Table of Content.….………………………………………………………………………3 

Features….………………………………………………………………………………...4 

1. Package 

Contents…….………………………………………………………………..5 

2. TFT 

Installation……………………………………………….…………………………6 

3. 

Signal Cable Description……..………………………………….…………………..7 

4.  Control Cable Description……..…………………………………….……………….9 

5.  Front Panel Control.……………………………………………………..………… 10 

    Main OSD Menu…….........……………………………………………….………11 

    Screen Menu……………………………………………………………………...12 

        Display  ……….…………………………………………………………….…13 

   

     Camera ...……………………………….…………..................................15 

    Information...……………………………….…………..................................19 

6. 

Vehicle Installation ……………………………………….……………………..20 

7. Specification…..………………………………………..……………………….21 

8. Attachment…..……………………………………………….……………………22 

 

 

 

 

 

 

 

 

 
 
 
 

TABLE OF CONTENT 

 


background image

 

4

 
 
 

Advanced OSD Menu for easy use     

Support up to 4 CCD Camera inputs (Mini din connector) 

Extra RCA input for multimedia while parking (VCD, DVD, Game device) 

Provide 2 Video / 1 Audio Signal Output (Live Out) 

Support Single / Dual / Triple / Quad Screen (Cam Out) 

Signal Trigger for Side / Rear View 

Auto Day & Night Control via Photo Diode Sensor 

Auto Detection for NTSC / PAL System 

OSD Control for Individual Normal / Mirror Camera Image for every camera 

Auto power on when users are making left turn or right turn even reverse 

Able to select CAM A / B/C / R’s monitoring screen 

Supported 9.6V~32V Car power system working 

Professional Metal Case with Anti Shocking Design   

 

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 
 

FEATURE 

 


background image

 

5

 
 
 

Item Qty. 

1.  7” LCD Monitor 

1  

2.  Sun-Hood 

1  

3.  Mounting Bracket 

1  

4.  Accessories 

1  

5.  Control Cable 

1  

6.  User Manual 

1  

 

 

 

 

 

 

 

 

 

 

 
 
 
 

 

 

 

 

1. Package Contents 

 


background image

 

6

 

Step 1 

Check the package and make sure all parts are included. 

Step 2 

Clip the sun-hood on to the monitor. 

 

Step 3 

Make sure it is installed properly. 

 

Step 4 

Install the monitor on to the bracket. 

 

Step 5 

Adjust the monitor to an appropriate / comfortable viewing 

angle before tightening the screws.   

 

Step 6 

Connect the control cable included to the power socket 

which located at rear side of monitor. 

 

Step 7 

Monitor installation is now completed. Each control cable 

wire is attached with a sticker to indicate its signal function. 

Referred to the identification sticker for further installation. 

 

 

 

 

2. TFT Installation 

 


background image

 

7

 

 

 

 

 

 

 

 

 

 

 

1. 

CAM R (Mini din) (NTSC/PAL system presume by this car rear CCD) 

For 1

st

 camera connection 

2. 

CAM A (Mini din) 

For 2

nd

 camera connection 

3. 

CAM B (Mini din) 

For 3

rd

 camera connection 

4. 

CAM C (Mini din) 

For 4

th

 camera connection 

5. 

LIVE VIDEO OUT (White Color RCA Jack) 

On screen video loop out (for recording, second monitor or other device) 

6. 

LIVE AUDIO OUT (Black Color RCA Jack) 

On screen audio loop out (for recording, second monitor or other device) 

7. 

AV VIDEO IN (Yellow Color RCA Jack) 

Connection for any Video signal (DVD, VCD, Game)   

8. 

AV AUDIO IN (Red Color RCA Jack) 

Connection for any Audio signal (such as DVD, VCD, Game)   

9. 

CAM OUT (Green Color RCA Jack) 

Video loop out (for recording, second monitor or other device) 

 

 
 
 

3Signal Cable Description 

 

 


background image

 

8

 
 
 
 
 
 
 
 
 
 

 
Function of the Audio   

 

※ Cam Out: Composite video loop out signal to recorder, monitor or other device. 
※ Live Video/Audio Out: On screen video/audio signal loop out to recorder, monitor 

or other device. 

 

 

 

 

 

 

Cam A   

Audio from Cam A 

Cam B 

Audio from Cam B 

Cam C 

Audio from Cam C 

Cam R 

Audio from Cam R 

Cam A + Cam B 

Audio from Cam A 

Cam C+ Cam R 

Audio from Cam R 

Cam A+ Cam R 

Audio from Cam R 

Cam R+ Cam B 

Audio from Cam R 

Cam A + Cam C 

Audio from Cam A 

Cam C+ Cam B 

Audio from Cam C 

Cam R / Cam AB 

Audio from Cam R 

Quad 

Audio from Cam R 

AV Audio 

from 

AV 

Mini Din Pin Assignment 

* Type 1 (Standard): 

 1. Video    

4. +12V 

2. ------- 

 

5. GND 

3. Audio     

6. ------- 

 

4

3

2

1

6

5

 


background image

 

9

 

 
 
 
 
 
 
 
 
 
 
 
 

1. The control cable sequence: Reverse > Right / Left / CAM C when Priority is ON. Right 
/ Left / CAM C > Reverse when Priority is OFF. 
2. With car power is on, the monitor power is off, when making a reverse / right / left turn, 
the monitor will display default screen. 
3. You may push the “JUMP” button under event trigger when Priority is OFF. 
 
 

WIRE COLOR 

FUNCTION 

REMARK 

ON SCREEN VIEW 

RED ACC 

POWER 

 

 

BLACK GND 

 

 

WHITE 

SW Control 

Active Power 

Level Connect to 

CAM C 

 

BLUE 

Reverse Control 

Active Power 

Level Connect to 

Reverse Light 

 

ORANGE 

Right Turn Control

Active Power 

Level Connect to 

Direction Light 

(R) 

 

YELLOW Left 

Turn 

Control 

Active 

Power 

Level Connect to 

Direction Light 

(L) 

 

4. Control cable Description 

 

Don’t  connect  the  red  wire  (power  wire)  of  this  product
directly to the battery. Connect the red wire of this product
to the ACC of the ignition key switch. Failure to do so may
result in permanent damage of the product. 

 

 

     Ju mp       S our ce      Power

     M enu

C AM  R

 

 

CAM R

CAM B

 

 

CAM A

CAM R

 

 


background image

 

10

 

 

 

POWER 

  Press the power button to activate the monitor or to keep the monitor 

under stand by mode (In Red Led). 

 

SELECT 

  With power on, press this button to select image sequence as below~ 

AV

ÆCAM A+BÆCAM C+RÆCAM A+RÆCAM R+BÆCAM A+CÆ 

CAM C+B

ÆCAM R/ABÆCAM R+ABÆCAM AÆCAM BÆCAM CÆ 

CAM R 

ÆAV…….. 

     Prerequisite:Display menu 

ÆPriority option is “ON”   

 

JUMP    

  Press this button to display defined camera input, user can select   

QUAD

ÆSEQÆCAM A+BÆCAM C+RÆCAM A+RÆCAM R+BÆ   

CAM A+C

ÆCAM C+BÆCAM R/AB ÆCAM R+AB ÆCAM A ÆCAM B   

CAM C

ÆCAM R via OSD as default value. 

Prerequisite:Display menu 

ÆPriority option is “ON” 

 

MENU    

  This encoder switch provides the following function: 

1. Activate OSD menu: Press the Menu switch to activate the OSD menu. 

    After the OSD menu is activated, in case users does not proceed for   

further set up, the OSD menu will then automatically turn off within   

20 seconds. 

2. Enter Function: Press the encoder switch to act as “Enter” function   

under the OSD menu. 

3.  Volume Value: Exit the OSD menu, user can turn this switch   

left or right to adjust the volume value. 

 

5. Front Panel Control 

 


background image

 

11

OSD Menu 

1.    Press the MENU button to enter to the OSD Menu 

2.    Turn the MENU button left or right to select the setting you   

wish to proceed. The color of the content will turns YELLOW   

to identify your selection. Turn the MENU button left or right to   

adjust your setting value. 

3. 

Press the MENU button once back to submenu and then press menu   

button again in order to return to OSD menu.     

 

Enter to Main menu:     

 

 

 

 

 

 

 

 

 

 

 

 

 


background image

 

12

SCREEN Menu 

This menu set up contains different setting for the TFT LCD. 

 

 

 

Brightness 
Provide adjustment for shade and brightness level of TFT display. 
Setting value from 0 ~ 100. Default value is 37. 
 
Contrast 
Provide adjustment for the light and dark level of the TFT display. 
Setting value from 0 ~ 100. Default value is 50.   

 

Saturation 

Provide adjustment for the light intensity level of TFT display. 
Setting value from 0 ~ 100. Default value is 40. 

 

Hue 
Provide adjustment for the lightness and colorfulness level of TFT display. 
Setting value from 0 ~ 100. Default value is 45. 
(Only in NTSC system is available.) 

 

Sharpness 
Provide adjustment for the edge contrast (acutance) level of TFT display. 
Setting value from 0 ~ 100. Default value is 100. 

 

Return 
Return to OSD menu selection screen. 

 

 


background image

 

13

 

          DISPLAY Menu 

This menu set up contains the on screen identification   

and the activation of the distance gauge. 

 

 

 

Auto Day&Night 
Select “ON” to activate the auto day & night function or “OFF” to   
deactivate it. Default value is OFF. 
 

Display 

Select “ON” to show the SELECT of video input title on screen or “OFF” 

to keep it invisible. Default value is ON. 

 

Distance Gauge 

Set the distance gauge “ON” to show the distance gauge on screen while 

reserving or “OFF” to deactivate. Default value is ON. 

(This “DISTANCE GAUGE” is for user’s reference only) 

 

OSD Lock 

This function provides protection when an unauthorized person tries to 

access the OSD settings. JUMP and SELECT key press simultaneously 

for over 5 seconds to unlock. Default value is OFF. 

 

※Users must turn on LCD in order to run unlock process. All function 

buttons are still working during OSD Menu lock up period. 

 


background image

 

14

PRIORITY 

If Priority is ON 

a. Press SOURCE button to select image sequence as below~ 

AV

ÆCAM A+BÆCAM C+RÆCAM A+RÆCAM R+BÆCAM A+CÆ 

CAM C+B

ÆCAM R/ABÆCAM R+ABÆCAM AÆCAM BÆCAM CÆ 

CAM R 

ÆAV……. 

b. Triggered mode priority: Reverse > Right/Left / CAM C 

c. JUMP mode: QUAD 

d. OSD Lock mode: OFF 

 

If Priority is OFF 

a. Press SOURCE button to select image sequence is as below~ 

AV

Æ CAM AÆCAM BÆCAM CÆCAM R ÆAV…….. 

b. Triggered mode priority: Right/Left/CAM C > Reverse 

c. JUMP mode: CAM R 

d. OSD Lock mode: ON 

 

Default value is “ON”. 

Notice:When you choose “OFF” mode also enable OSD Lock function. 

 

REVERSE MODE 

When reversing select LCD profile ratio 4:3 the display show in size 

4:3(default), select LCD profile ratio 16:9 the display show in size 16:9 

 

Return 

Return to OSD menu selection screen. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 


background image

 

15

 

            CAMERA Menu 

This menu set up contains the on Camera and Jump setting. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mirror 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select “ON” to activate the mirror function for different cameras or 

“OFF” for a normal image. Default values are following below setting. 

  

CAM A      “OFF” 

CAM B     “OFF” 

CAM C     “OFF” 

CAM R      “ON” 

 


background image

 

16

Dir Image 

The screen image setting of this panel during left / right turn: 

 

 

TRIPLE: When you are making a right turn or left turn, the screen of 

panel will display triple images for left hand side, right   
hand side and rear view when you are making a right turn   
or left turn.     

 

DUAL:    With proper wiring, the screen will display dual image for   

both rear and right hand side view when making a right turn. 
While left turning, the screen will show dual image for both   
rear and left hand side view. 

 

SINGLE:   Screen of touch panel shows only single picture on direction   

turn. The screen will show only left side view on left turn and   
only right side view on right turn.   

Default value is SINGLE. 

 

Rear Setup 

The screen image setting of this panel during reverse gear: 

R:   

 

Screen will display single image for Cam R only. 

R+A:   

Screen will display dual image for both Cam R and Cam A. 

R+B:    

Screen will display dual image for both Cam R and Cam B.   

R/AB   

Screen will display triple image from Cam R、Cam A、Cam B. 

 

 

 

 

 

 

R+AB  

Screen will display triple image from Cam R、Cam A、Cam B. 

 

 

 

 

 
 
Default value is R. 

     Menu

CAM R

CAM B

CAM A

 

 

CAM R

CAM B

CAM A

 

 


background image

 

17

Jump 
By pressing this button, the driver will be able to obtain the image   
selected under this setting.     
QUAD 

Obtain image from all camera input in quad picture 
while pressing the JUMP button and press again to 
return the default screen. 

SEQ.  

Corresponding with “SEQ. Timer Step” setting to 
jump channel by time sequence. 

CAM A 

Obtain image from camera A while pressing the 
JUMP button and press again to return the default 
screen. 

CAM B 

Obtain image from camera B while pressing the 
JUMP button and press again to return the default 
screen. 

CAM C 

Obtain image from camera C while pressing the 
JUMP button and press again to return the default 
screen. 

CAM R 

Obtain image from camera R while pressing the 
JUMP button and press again to return the default 
screen. 

CAM A+B 

Obtain image from camera A+B in dual picture while 
pressing the JUMP button and press again to return 
the default screen. 

CAM C+R 

Obtain image from camera C+R in dual picture while 
pressing the JUMP button and press again to return 
the default screen. 

CAM A+R   

Obtain image from camera A+R in dual picture while 
pressing the JUMP button and press again to return 
the default screen. 

CAM R+B   

Obtain image from camera R+B in dual picture while 
pressing the JUMP button and press again to return 
the default screen. 

CAM A+C   

Obtain image from camera A+C in dual picture while 
pressing the JUMP button and press again to return 
the default screen. 

CAM C+B   

Obtain image from camera C+B in dual picture while 
pressing the JUMP button and press again to return 
the default screen. 

CAM R/AB 

Obtain image from camera R+A+B in triple picture 
while pressing the JUMP button and press again to 
return the default screen. 

CAM R+AB 

Obtain image from camera R+A+B in triple picture 
while pressing the JUMP button and press again to 
return the default screen. 

Default value is QUAD. 
 
 

 


background image

 

18

Cam Out 
Composite video loop out to recorder, monitor or other device. 

QUAD 

Recording or viewing from the output device in quad 
mode 

CAM A 

  Recording or viewing from the output device for CAM   

A image 

CAM B 

  Recording or viewing from the output device for CAM   

B image 

CAM C 

Recording or viewing from the output device for CAM     
C image 

CAM R   

Recording or viewing from the output device for CAM     
R image 

Default value is QUAD. 
 
SEQ Time Step 
Select Cam A/B/C/R switching time setting value from 02~100 
Default value is “02” 
 

Return 

Return to OSD menu selection screen. 

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 


background image

 

19

                        Information 

This menu set up contains Recall & Exit function. 
 

 

 

 

 

 

 

 

 

 

 

Recall 
Recall factory default. 

 

 
Exit 
Exit OSD menu. 
 
Notice:Firmware version has shown on last column. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


background image

 

20

 

 
 
 
 
 
 
 
 
 

(This “ DISTANCE GAUGE” is for user’s reference only) 

a. 

Install Camera R (for rear view) 

b. 

Use a measuring tool to mark out the distance behind the vehicle. 

c. 

Adjust the viewing angle of the camera so that the distance gauge shown 

from the TFT match to the distance marks behind the vehicle. 

 

Switch to Rear view with SELECT button, the screen always display on 16:9 
While rear viewing, the screen always display on 4:3 to correct size percentage 

SELECT 

button: 

   Rear 

viewing: 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

6. Vehicle Installation 

0M              1M              2M             3M
         Red           Yellow         Green       

C amera

 

Green

Red

        Yellow

1M

 

9

3

16 

 


background image

 

21

 
 
 

Screen size              7 Inch Touch Panel ( diagonal ) 
Active area 

154.08(H) x 86.58(V) 

Pixel configuration     

0.107 x 0.370 

Resolution      

1440(W) x 234 (H) 

Viewing angle 

UP:40°  /  Down:60°   /  Left: 60°   /  Right:60° 

Power source: 

DC9.6V ~DC32V 

Contrast ratio 

300:1     ※ 

Brightness 450 

cd/m

2  

※ 

AV Video In 
Connector RCA 
Input Signal 

1Vpp 

Impedance 75 

Ohms 

Camera MINI DIN In 
Connector 

6 PIN MINI DIN (Standard) 

Input video signal level 

1Vpp   

Impedance   

75 Ohms 

Input audio signal level 

1Vpp   

Power output for camera

DC12V 350mA 

AV Audio In 
Connector RCA 
Input video signal level 

1Vpp     

Impedance   

1K Ohms 

Live Video Out 
Connector RCA 
Input signal level 

1Vpp 

Impedance   

75 Ohms 

CAM OUT 
Connector RCA 
Input signal level 

1Vpp 

Impedance 75 

Ohms 

LIVE Audio Out 
Connector RCA 
Input signal level 

1Vpp 

Impedance 1K 

Ohms 

Dimension 
W x H x D : 

192 x140.5 x 51.8mm 

Weight N.W./G.W.: 

2kg/ 

2.28kg 

Environmental:  
Operation temperature 

-10℃~70℃ 

Storage temperature 

-30℃~80℃ 

Humidity 20%-80% 

  

The brightness

 and contrast ratio specifications are from panel specification. 

Design and Specifications are subject to change without notice. 

           

A1.6 

7. Specification 

 


background image

 

22

 

 

 
Attachment 1:  Dimension Chart 

 

 

 

 

 

 

 

 

8. ATTACHMENT 

 


background image

 

23

Attachment 2:  Installation Chart 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notice: 

Please proceed with suggested installation instruction according to above picture to avoid any 

malfunction of the product. 

 


background image

 

24

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Cable should be stored in a dry place and please try to avoid the water and 
humidity, otherwise, it may cause problem of the product itself or even more 
dangerous. 

 
 

 

85-ML072Q-A003G - D

 

Connecting Steps for Cable of Two-Sections-in-One. 

 
A. The first part of the cable which connected   
      with the LCD Monitor, herewith we called   
   the Male Section 
 
B. The second part of the cable which ended   
        with the RCA/MINI DIN connectors, herewith 
    we called the Female Section. 
 
 
 
Connection Steps are: 
 
1. Please connect the “Male   
    Section” to the “Female Section. 
 
 
 
 
 
 
 
2. Please tight up the side screws.