PDF User Manual

  1. Home
  2. Manuals
  3. 3Svision N8072 Quick Manual

3Svision N8072 Quick Manual

Made by: 3Svision
Type: Quick Guide
Category: Security Camera
Pages: 2
Size: 0.84 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

Cube Network Camera

Quick Guide

N8072

Enter the Main Page

Step

4

Install Internet Explorer Active X Controller

Step

5

Open a new Internet Explorer window.

Start

1

Enter the new IP address and key in the username 
“root” and password “root”.

Enter the IP address and login

2

● When the login screen appears, key in root in the
   User Name and Password fields. Click OK.

● Enter the IP address that you have just set.

You can enter the control screen when the username and 
password are confirmed.

Enter the control screen

3

When the username and password are confirmed, a 
control setup screen pops up under the IE address bar. 
Click “Install ActiveX Control” to install the controls.

Install ActiveX

1

● Click Install ActiveX Control 

RMIM-01G06022 Ver:10

When ActiveX Control is installed successfully, you can 
see the camera image and interface.

Camera operation and interface

3

● Select the HTTP mode if the image is disabled.

● Click Install

The ActiveX Control is named ActiveX Control.
This software is well certified. You can use it without any 
doubts on its validity.

The security warning screen aps. Click Install.

2

- Page 3 -

 


background image

Connection diagram

Step1

Camera settings

Step

2

Change the Internet Explorer 

settings

Step

3

● Click Search to find the IP CAM on the LAN.

Note:
If this software cannot run successfully, check that it is not 
blocked by an anti-virus software or firewall.

Execute the Cam Finder.exe file from the supplied CD.

Start

1

Search for the product from your LAN. The default IP
setting 192.168.0.20 appears on the screen.

Find the camera (Search)

2

When you find the camera, click it and the settings
appear on the right side. You can change the settings 
for the new network environment as you need.

Changing the IP address and related

settings for the network environment

3

Submit data (Submit)

4

● Click Submit to apply the new settings.

Confirmation

● Click Exit to quit, after all chages have been confirmed.

Open the IE browser

Tools

 Internet Options

Security 

 ↓ 

Custom Level

Steps

Note: This product supports IE 6.0 or above.

● 

Check that the security level is Level II.

Bring Up Your IE browser.

Start

1

Make sure that Level II, the commonly used default 
security level, is set for the security.

Check

2

Make sure that Level II, the commonly used default security 
level, is set for the security.

Select “medium” for security

3

Click 

OK 

to quit.

OK

4

● 

Enter the settings for the new network 

  environment you need.

- Page 1 -

- Page 2 -

Connect the product to the switch hub and PC.

• You have to enter a new settings in the IP Netmask and
  Gateway fields and keep the settings in other fields 
  unchanged.

Prepare the product, your PC and switch hub 
ready for connection.Make sure that your PC 
has a LAN port available for connection to the 
network cable of the product. 

Attention

1. Please refer to user manual for more detailed 
    explanation of the hardware installation.
2. Where no switch hub is available, you can 
    search and set up the camera using the 
    network peering approach.
    However, you may need a jumper and need to 
    change the LAN configuration on your PC for  
    this purpose. It is recommended to request a 
    qualified engineer for the connection or execute 
    the network peering referring to the user's   
    manual .

Prepare the product, your PC and

switch hub ready for connection.

1

Prepare the product, your PC and switch hub 
ready for connection.Make sure that your PC 
has a LAN port available for connection to the 
network cable of the product. 

Connect the switch hub to your PC

(as shown in the figure).

4

Turn on the power of the PC and hub.

Turn on the power.

5

Connect the product to the switch

hub (as shown in the figure).

3

Connect the product to the power

source  (as shown in the figure).

2

Connect the with your power adaptor directly.
The Power Led Indicator will light when the 
power on.

Use a network cable and plug it in the LAN port of the 
product. Plug the other end of the cable in the LAN 
port of the hub.

After you have finished install the product. 
* Please check if it is ready to use by the Led indicator 
  as below:
  NET          It will light in green when the network is 
                   connected.
  STATUS   It will light in yellow when any event triggered.
  POWER    It will light in red when the power on.

● 

HUB

● 

Micro SD Card

● 

PIR Sensor

● 

MIC

● 

Illumination

   LED

● 

Power

● 

Speaker

● 

Reset Button

● 

Led Indicator

5 seconds

 

Power

 HUB

 HUB

 PC

● 

Led Indicator