PDF User Manual

  1. Home
  2. Manuals
  3. 3SIXT 3S-0954 User Manual

3SIXT 3S-0954 User Manual

Made by: 3SIXT
Type: User Guide
Category: Headphone
Pages: 12
Size: 0.39 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

USER GUIDE

STUDIO TRUE 

WIRELESS EARBUDS 

with Wireless Technology

3S-0954


background image

IMPORTANT SAFETY INFORMATION

Read the following recommendations before using the 3SIXT 

Studio True Wireless Earbuds:
•  Before recharging 3SIXT Studio True Wireless Earbuds through 

a wall outlet, make sure wall charger outlet voltage is 5V 1A;

•  Make sure to use the Micro USB Charge Cable that came with 

this product, other cables may damage your Studio True 

Wireless Earbuds;

•  Do not drop, knock, disassemble or attempt to repair 3SIXT 

Studio True Wireless Earbuds. Do not immerse or put 3SIXT 

Studio True Wireless Earbuds in water. Store 3SIXT Studio True 

Wireless Earbuds in a dry place;

•  Do not expose 3SIXT Studio True Wireless Earbuds to 

excessive heat including direct sunlight and fire;

•  Do not use 3SIXT Studio True Wireless Earbuds near explosive 

gases or flammable materials;

•  Do not burn or incinerate 3SIXT Studio True Wireless Earbuds;
•  Do not expose 3SIXT Studio True Wireless Earbuds to harsh 

chemicals;

•  Keep 3SIXT Studio True Wireless Earbuds away from young 

children;

•  Putting anything in 3SIXT Studio True Wireless Earbuds input 

or storage ports other than the supplied Micro USB Charge 

Cable or your device’s charging cable will cause damage or 

short out 3SIXT Studio True Wireless Earbuds;

•  To extend 3SIXT Studio True Wireless Earbuds charging life, do 

a complete recharge of the Earbuds every four months;

PLEASE NOTE: 3SIXT Studio True Wireless Earbuds are only 

SPLASH RESISTANT. They have a level 4 water ingression rating 

that means they can sustain exposure to light rain and sweat.


background image

3

Welcome

This User Guide will give you the 

information on how to enjoy your 

3SIXT Studio True Wireless Earbuds.

For more information and support, 
visit 

www.3sixtgear.com


background image

4

4

5

6

8

9

7

3

1

2

GETTING TO KNOW YOUR 

3SIXT STUDIO TRUE WIRELESS EARBUDS

Buttons, Ports & Lights
1- MF Button
2- Microphone
3- Silicone Gel Ear Buds
4- Indicator Light 
5- MF Button Right

6- Charging Case
7- Internal Battery
8- Charge Indicator
9- Micro USB Port 5V 1.0A


background image

5

4

ACCESSORIES

1)  Studio True Wireless Earbuds

2)  Micro USB Charge Cable

3)  Charging Case

4)  User Guide

HIGHLIGHTS

3SIXT Studio True Wireless Earbuds can be connected 

to Bluetooth® devices such as smart phones, tablets and 

computers to playback your favorite music via streaming 

services or through your own music library. 3SIXT has utilised 

the latest in True Wireless Technology that allows you to “cut the 

cord” forever. 3SIXT Studio True Wireless Earbuds can sustain 

up to 3 hours of continuous music playback. When in need of 

a recharge, the handy charging case has 500mAh power bank 
built in for a quick power up to get you going again.

EARPHONES WIRELESS CONNECTION

Connecting the Earbuds to each other

As soon as you take out the Earbuds from the charging case quickly 

insert both earbuds into your ears. Both earbuds will automatically 

turn on and you will hear the voice prompt “Power On”. In a few 

seconds, the Earbuds will auto pair with each other and you will hear 

the voice prompt “Connected, Left Channel Right Channel.” The left 

earbud will flash blue and white and the right earbud will flash white 

every 7 seconds until the first time pairing is successful.
Connecting both earbuds for the first time will take around 15-20 

seconds.
This process has only connected the Earbuds together, The next 

step is to pair the Earbuds to your device.


background image

6

PAIRING TO MOBILE PHONES/TABLETS/COMPUTERS

After the Earbuds are connected to each other, you will hear the voice 

prompt “Paring,” this means that the Earbuds are in pairing mode, and 
are discoverable as a Bluetooth® device.
Activating Bluetooth® on your device:

1)  Go to your device Bluetooth® settings and scan for new 

Bluetooth® devices;

2)  Search for 3SIXT 3S-0954 and once found, click on it to pair with 

3SIXT Studio True Wireless Earbuds;

3)  If your device asks for a pairing code, please enter ‘0000’ and 

confirm it;

4)  You will hear the voice prompt “Second device connected” this 

indicates both earbuds successfully connected to your device and 

are ready to go.

LOW POWER WARNING

3SIXT Studio True Wireless Earbuds will make a voice prompt to remind 

you to charge if the battery is low (battery <10%). You will need to charge 
the Earbuds regularly to maintain a full charge.

CHARGING THE EARBUDS

The charging case has built in 500mAh battery. When the Earbuds 

power is low insert them into the charging case to recharge them.
The Blue LED light on the case (8) will illuminate: 

Solid blue light: 100%, Three blue flashes: 75% Two blue flashes: 50%, 

One blue flash: 25% (or below).

CHARGING THE CASE

Connect the Micro USB Charge Cable to a USB 5V 1A charger to 

recharge the Earbuds charge case internal battery via the Micro 

USB port (9). When the Earbuds are removed from the case the Blue 

LED light will blink once to indicate the Charge Case battery is low. In 

normal conditions you can expect about 5 full Earbuds charges from 

a fully charged case.


background image

7

6

TECHNICAL SPECIFICATIONS

Power input

Micro USB 5V 1.0A

Ingress Rating

IPX4 Splash Proof

Battery

Lithium Ion 3.7v/100mAh (Each Earbud 50mAh)

Wireless Protocol

BT v4.2

Distance

Up to 10m

Input

5V 1A

Audio Output

5mW

Unit

10 mm x 2

Playback Time

2-3 hours

Recharge Time

1-2 hours

Dimensions

74 x 32 x 32mm

Weight

148.6g

Frequency Range

20Hz-20KHz

DistortionTHD

~1%

Working Temperature

Temperature: -10°C - 55°C / Humidity: 0% -85%

Storage Temperature

Temperature: -20°C - 60° C / Humidity: 0% -90%

 

GENERAL OPERATION

Powering On/OFF

Remove the Earbuds from the charging case to turn on
Place the Earbuds back into the charging case to turn off

Answering &  

Ending a call

During an incoming call, short press the left MF (1) to 
answer the call. Use your device screen/keypad to 
end the call.

Refusing a call

Short press the left MF (1) key twice to reject the call.

Redial last number

Short press the left MF (1) to redial

Play/Pause

Short press the left/right MF (1/5) key to play/pause

Volume - or +

Volume is controlled from your device directly

Next/Previous

Short press the left/right MF (1/5) twice to go to the next 
track.
Short press the left/right MF (1/5) x 3 to go to the previous 
track.

Disconnect wireless 

connection

Long press left/right ‘MF’ (1&5) for 4 seconds to power 
off. Voice Prompt “Power Off” Only need to press one


background image

8

LED STATUS

Connecting Status

Left Ear Blue/White LED (4) flashing

Connecting mode

Left Ear White LED (4) light Steady

Connected

Pairing Status

Left Ear Blue LED (4) flashing

Pairing mode

Left Ear White LED (4) light Steady

Paired

Earbuds Charging Status

Blue light (8) rapid flashing on the charging case when the Earbuds are inserted

Blue light flashing

20%

Blue light rapid flashing x 2

50%

Blue light rapid flashing x 3

75%

Blue Light Steady

100%

Charging Case Status

Blue light (8) illuminates when the Earbuds are removed from the case

Blue light flashing

Charge required

COMFORT & FIT

3SIXT Studio True Wireless Earbuds come with three sizes 

(Small, Medium, Large) of Silicone Gel Ear buds (6). Please take 

time to try all three sizes and test them for in ear comfort and 

sound isolation. Ensuring a good fit dramatically increases the 

sound quality & performance of your Earbuds

Please Note: We do our best to reflect accurate specifications, however periodic 

updates and changes may occur after this manual was printed. We reserve the right 

to change the parameters without prior notification.


background image

9

8

TROUBLE SHOOTING

1.  My 3SIXT Studio True Wireless Earbuds went flat and now 

they won’t auto connect

a)  You will need to commence the pairing process again

b)  Fully charge 3SIXT Studio True Wireless Earbuds to 100%

c)  In your device Bluetooth settings “Forget Device” 

3SIXT3S-0954

d)  Commence the Connection & Paring process again

2.  My device can’t find any new Bluetooth® devices

a)  Make sure 3SIXT Studio True Wireless Earbuds have 

entered pairing mode.

b)  Ensure 3SIXT Studio True Wireless Earbuds are within the 

effective working range (10m)

3.  Bluetooth® devices cannot pair

a)  Make sure your device allows new Bluetooth® 

connections.

b)  Make sure the pairing password entered is ’0000’.  

If you are using a Bluetooth® transmitter device, please 

ensure the responding password of your Bluetooth 

transmitter supports the ‘0000’ code.

4.  My 3SIXT Studio True Wireless Earbuds do not play music or 

answer calls when they are connected to a Bluetooth® device

a)  Make sure your Bluetooth® device supports A2DP and 

HSF profile.

b)  Ensure your Bluetooth® enabled device is within the 

effective working range.

5.  When paired with my computer, Windows asks for a new 

driver. Can you supply?

Sorry, we do not supply drivers. Please visit your PC 

manufacturer’s website for the latest driver updates.

6.  Are 3SIXT Studio True Wireless Earbuds waterproof?

No, 3SIXT Studio True Wireless Earbuds are only splash 

resistant. They have a level 4 water ingression rating that 

means they can sustain exposure to light rain.


background image

10

AUSTRALIA & NEW ZEALAND 
TWO YEAR WARRANTY

3SIXT will replace the faulty product at no cost to the consumer. 

The warranty does not extend to any consequential damages or 

costs that may be incurred and is valid for TWO YEARS from date 

of purchase. The consumer must return the faulty product to the 

retail store it was purchased from together with proof of purchase. 

The benefits to the consumer under this warranty are in addition 

to other rights and remedies of the consumer under Australian 

and New Zealand laws in relation to the goods to which the 

warranty relates. Our goods come with guarantees that cannot be 

excluded under the Australian Consumer Law. You are entitled to 

a replacement or refund for major failure and for compensation for 

any other reasonably foreseeable loss or damage. You are also 

entitled to have the goods repaired or replaced if the goods fail to 

be of acceptable quality and the failure does not amount to a 

major failure.
The warranty is provided by:
Australia: Cellnet Group Limited 

59-61 Qantas Dr, Eagle Farm, QLD 4009 

Phone: 1300 CELLNET (1300 235 563) 

Email: info@cellnet.com.au
New Zealand: Cellnet Limited 

10a Orbit Dr, Rosedale, Auckland 0632 

Phone: 0800 CELLNET (0800 235 563) 

Email: info@cellnet.co.nz


background image

10

EN

DE

FR

ES

IT

3SIXT PRODUCT SUPPORT 

For more information, visit

 www.3sixtgear.com/support

3SIXT PRODUKT-SUPPORT 

Bitte besuchen Sie

 www.3sixtgear.com/support

ASSISTANCE PRODUIT 3SIXT 

Veuillez consulter

 www.3sixtgear.com/support

ASISTENCIA TÉCNICA DEL PRODUCTO 3SIXT 

Visite

 www.3sixtgear.com/support

ASSISTENZA TECNICA 3SIXT 

Si prega di visitare

 www.3sixtgear.com/support

Copyright © 2017.

3SIXT and its logo are trademarks of Cellnet Group Limited 

 in Australia & New Zealand. All Rights Reserved.

The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc.

CELLNET GROUP LIMITED  

59-61 Qantas Drive, Eagle Farm, QLD 4009 Australia. 

MADE IN CHINA.

3SIXTgear.com


background image

For more information, visit

 

www.3sixtgear.com

or visit

 www.3sixtgear.com/support

3SIXTgear

3S-0954