Full Text Searchable PDF User Manual
USER GUIDE
BT STUDIO BUDS
with Wireless Technology
3S-0953
IMPORTANT SAFETY INFORMATION
Read the following recommendations before using the
3SIXT Studio Buds:
• Before recharging 3SIXT Studio Buds through a wall
outlet, make sure wall charger outlet voltage is 5V 1A;
• Make sure to use the Micro USB Charge Cable that came
with this product, other cables may damage your Studio
Buds;
• Do not drop, knock, disassemble or attempt to repair
3SIXT Studio Buds. Do not immerse or put 3SIXT Studio
Buds in water. Store 3SIXT Studio Buds in a dry place;
• Do not expose 3SIXT Studio Buds to excessive heat
including direct sunlight and fire;
• Do not use 3SIXT Studio Buds near explosive gases or
flammable materials;
• Do not burn or incinerate 3SIXT Studio Buds;
• Do not expose 3SIXT Studio Buds to harsh chemicals;
• Keep 3SIXT Studio Buds away from young children;
• Putting anything in 3SIXT Studio Buds input or storage
ports other than the supplied Micro USB Charge Cable or
your device’s charging cable will cause damage or short
out 3SIXT Studio Buds;
• To extend 3SIXT Studio Buds charging life, do a complete
recharge of the Airbuds every four months;
PLEASE NOTE: 3SIXT Studio Buds are only SPLASH
RESISTANT. They have a level 4 water ingression rating
that means they can sustain exposure to light rain and
sweat.
3
Welcome
This User Guide will give you the
information on how to enjoy your
3SIXT Studio Buds.
For more information and support,
visit
www.3sixtgear.com
4
1
8
3
2
4
5
6
7
7
GETTING TO KNOW YOUR 3SIXT STUDIO
BUDS
Buttons, Ports & Lights
1- MF Button
2- Microphone
3- Volume/Track Up
4- Volume/Track Down
5- Micro USB Port 5V 1.0A
6- Silicone Gel Buds
7- Magnetic Connector
8- Indicator Lights
5
4
ACCESSORIES
1) Studio Buds (Magnetic)
2) Micro USB Charge Cable
3) User Guide
HIGHLIGHTS
3SIXT Studio Buds can be connected to Bluetooth® devices
such as smart phones, tablets and computers to playback your
favorite music via streaming services or through your own music
library. 3SIXT has utilised the latest in Wireless Technology that
allows you to “cut the cord” forever. 3SIXT Studio Buds can
sustain up to 4 hours of continuous music playback. With the
secure silicone ear clips 3SIXT Studio Buds are an ideal workout
partner and can be used indoors or out.
EARPHONES MAGNETIC OPERATION
Power On/Off
3SIXT Studio Buds have a magnetic auto on/off function that is
activated by joining the left and right ear buds together at their
base (7).
To turn on 3SIXT Studio Buds pull the magnetic ear buds apart(7).
There will be a voice prompt “Power On” and a long beep will be
heard. LED Light (8) on the in line controller will be steady blue if
already paired or rapid flashing red/blue if in pairing mode.
To turn off 3SIXT Studio Buds connect the magnetic ear buds
together (7), there will be a voice prompt “Power Off” and a red LED
will flash for 1 sec on the in line controller (8). and long beep will
be heard.
After powering on, if a device is not connected or paired within 5
minutes 3SIXT Studio Buds will power off automatically to save
power.
6
PAIRING TO MOBILE PHONES/TABLETS/COMPUTERS
Turn on 3SIXT Studio Buds by pulling the magnetic ear buds apart (7).
There will be a voice prompt “Power On” and a long beep. The LED light
on the in line controller will be rapid flashing red/blue
Activating Bluetooth® on your device:
1) Go to your device Bluetooth® settings and scan for new
Bluetooth® devices;
2) Search for 3SIXT 3S-0953 and once found, click on it to pair with
3SIXT Studio Buds;
3) If your device asks for a pairing code, please enter ‘0000’ and
confirm it;
4) You will hear the voice prompt “Your Headset is Connected” and
a short beep;
5) The LED light on the controller turns to solid blue;
LOW POWER WARNING
3SIXT Studio Buds will make a voice prompt to remind you to charge if the
battery is low (battery <10%). You will need to charge 3SIXT Studio Buds
regularly to maintain a full charge.
CHARGING 3SIXT STUDIO BUDS
1) Connect the supplied Micro USB Charge Cable to a USB 5V 1A charger.
2) Carefully remove the dust cover from the Micro USB charging
port (5) on 3SIXT Studio Buds in line controller. The dust cover is
tethered to the in line controller for ease of use.
3) Insert the the micro USB cable connector into the Micro USB
charging port (5) on the in line controller to commence the
charging.
4) When 3SIXT Studio Buds are charging the red LED light (8) will
illuminate to indicate that 3SIXT Studio Buds are in charging
mode.
5) Once 3SIXT Studio Buds battery is full, the LED Light (8) will turn
solid Blue.
6) Disconnect the Micro USB cable from 3SIXT Studio Buds &
carefully replace the dust cap on the in line controller.
7
6
TECHNICAL SPECIFICATIONS
Power input
Micro USB 5V 1.0A
Ingress Rating
IPX4 Splash Proof
Battery
Lithium Ion 3.7v/130mAh
Wireless Protocol
BT v4.1
Distance
Up to 10m
Input
5V 1A
Audio Output
5mW
Unit
10 mm x 2
Playback Time
Up to 4 hours
Recharge Time
1-2 hours
Dimensions
56cm
Weight
16g
Frequency Range
160Hz-20KHz
DistortionTHD
~1%
Working Temperature
Temperature: 0°C - 40°C / Humidity: 0% -85%
Storage Temperature
Temperature: -30°C - 60° C / Humidity: 0% -90%
GENERAL OPERATION
Powering On/OFF
Pull the magnetic ear buds apart
Connect the magnetic ear buds together
Answering & Ending a call
During an incoming call, short press the MF button
(1) to answer the call. Press the MF button (1) again
to end the call
Refusing a call
Long press the MF (1) key to reject the call.
Redial last number
Short press the MF (1) key two times to redial
Play/Pause
Short press the MF (1) key to play/pause
Volume - or +
Short Press the V+ (3) or V- (4) buttons as required
Next/Previous
Long press the V+ (3) to go to the next track.
Short press the V- (4) to go to the previous track..
Manual disconnection of
the BT connection
Long press the MF (1) Key for 3 seconds to power off.
Voice Prompt “Power Off”
Manual BT Pairing mode
Long press the MF (1) Key for 2 seconds to enter the
pairing mode. Voice Prompt “Pairing”
8
LED STATUS
Pairing Status
In line Controller LED blue/red flashing
Connecting mode
In line controller LED blue steady
Connected
Charging Status
In line controller LED ready steady
Charging
In line controller LED blue steady
Fully Charged
COMFORT & FIT
3SIXT Studio Buds come with three sizes (Small, Medium, Large)
of Silicone Gel Ear buds (6). Please take time to try all three
sizes and test them for in ear comfort and sound isolation.
Ensuring a good fit dramatically increases the sound quality &
performance of your 3SIXT Studio Buds.
3SIXT Studio Buds also come with Silicone Ear Clips that ensure
a secure & firm fit. These are “one size fits all” as they are
designed to fit & mould into the contour of all ears. It is highly
recommended that 3SIXT Studio Buds are used injunction
with the silicone ear clips for a secure fit and best audio
performance
Please Note:
We do our best to reflect accurate specifications, however periodic
updates and changes may occur after this manual was printed. We reserve the right to
change the parameters without prior notification.
9
8
TROUBLE SHOOTING
1. My 3SIXT Studio Buds went flat and now they won’t auto
connect
a) You will need to commence the pairing process again
b) Fully charge 3SIXT Studio Buds to 100%
c) In your device Bluetooth settings “Forget Device”
3SIXT3S-0953
d) Commence the Connection & Paring process again
2. My device can’t find any new Bluetooth® devices
a) Make sure 3SIXT Studio Buds have entered pairing mode.
b) Ensure 3SIXT Studio Buds are within the effective working
range (10m)
3. Bluetooth® devices cannot pair
a) Make sure your device allows new Bluetooth® connections.
b) Make sure the pairing password entered is ’0000’.
If you are using a Bluetooth® transmitter device, please
ensure the responding password of your Bluetooth
transmitter supports the ‘0000’ code.
4. My 3SIXT Studio Buds do not play music or answer calls
when they are connected to a Bluetooth® device
a) Make sure your Bluetooth® device supports A2DP and
HSF profile.
b) Ensure your Bluetooth® enabled device is within the
effective working range.
5. When paired with my computer, Windows asks for a new
driver. Can you supply?
Sorry, we do not supply drivers. Please visit your PC
manufacturer’s website for the latest driver updates.
6. Are 3SIXT Studio Buds waterproof?
No, 3SIXT Studio Buds are only splash resistant. They have a
level 4 water ingression rating that means they can sustain
exposure to light rain.
10
AUSTRALIA & NEW ZEALAND
TWO YEAR WARRANTY
3SIXT will replace the faulty product at no cost to the consumer.
The warranty does not extend to any consequential damages or
costs that may be incurred and is valid for TWO YEARS from date
of purchase. The consumer must return the faulty product to the
retail store it was purchased from together with proof of purchase.
The benefits to the consumer under this warranty are in addition
to other rights and remedies of the consumer under Australian
and New Zealand laws in relation to the goods to which the
warranty relates. Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You are entitled to
a replacement or refund for major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a
major failure.
The warranty is provided by:
Australia: Cellnet Group Limited
59-61 Qantas Dr, Eagle Farm, QLD 4009
Phone: 1300 CELLNET (1300 235 563)
Email: info@cellnet.com.au
New Zealand: Cellnet Limited
10a Orbit Dr, Rosedale, Auckland 0632
Phone: 0800 CELLNET (0800 235 563)
Email: info@cellnet.co.nz
10
EN
DE
FR
ES
IT
3SIXT PRODUCT SUPPORT
For more information, visit
www.3sixtgear.com/support
3SIXT PRODUKT-SUPPORT
Bitte besuchen Sie
www.3sixtgear.com/support
ASSISTANCE PRODUIT 3SIXT
Veuillez consulter
www.3sixtgear.com/support
ASISTENCIA TÉCNICA DEL PRODUCTO 3SIXT
Visite
www.3sixtgear.com/support
ASSISTENZA TECNICA 3SIXT
Si prega di visitare
www.3sixtgear.com/support
Copyright © 2017.
3SIXT and its logo are trademarks of Cellnet Group Limited
in Australia & New Zealand. All Rights Reserved.
The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc.
CELLNET GROUP LIMITED
59-61 Qantas Drive, Eagle Farm, QLD 4009 Australia.
MADE IN CHINA.
3SIXTgear.com
For more information, visit
www.3sixtgear.com
or visit
www.3sixtgear.com/support
3SIXTgear
3S-0953