Related Product Video
Full Text Searchable PDF User Manual
Screen size: 8 inches 800*600 4:3 ratio
Speaker Output: 8W (2W*2+4W)RMS
Supported file format: JPEG/BMP/JPEG Progressive/EXIF/MP3/WMA/AAC/WAV/M-Jpeg/Mpeg4/H.264(D1)
Acceptable photo cards: MS, MS Pro, MMC, SD, XD
USB ports: USB 1.1 and USB 2.0
Internal memory storage: 1GB
Power supply: AC 110V-240V~60/50Hz (DC 9V2A)
Max power consumption: 15 W
Dimensions (with frame): 260(L) x 230(W) x 244(H) mm
Weight: 1016 g
Thank you for purchasing this Multifunctional
Digital Photo Frame
. This deluxe Multifunctional
will bring more happiness to your colorful life.
1. Playing photos by slide show with music background.
2. Playing Music
3. Playing Movies
4. Calendar function
5. Files management
6. 2.1 channel stereo Speaker stand (can be used as speaker of other Audio device connected to the set
using supplied audio cable).
7. Other memory storage compatibility (connecting to the set using supplied USB cable).
8. Memory cards compatibility
PC Sync Display Function
10. Deluxe easy-to-use remote control included.
After unpacking, make sure the following accessories
are supplied with your unit. If you find something missing
or broken, contact the local dealer in your area.
1. Digital photo frame with speaker stand
2. AC adaptor
3. Remote control
4. USB cable
5. 1 set of audio cable with 3.5mm plug
6. Installation CD
7. Operating Instructions
LOCATION OF CONTROLS
4.Left button-For menu selection.
5.Down button-For menu selection and reducing the volume.
6.Right button-For menu selection.
7.Enter/play button- Press to confirm the selection.
1.ESC button-Press to
return to upper menu.
2.Menu button-Press to
show the edit menu.
3.Up button- For menu
selection and raising
Front view of screen
Rear view of screen
1.Power button-press to switch the set on or off.
2.Bulit-in speakers- For audio out put.
3.Aux in jack-Connecting to the component audio out put.
4.DC in jack-Connecting to the attached AC/DC adaptor.
5.USB port-Connecting to other storage using USB cable.
6.Mini USB jack-Connecting to PC using USB cable.
7.SD/MMC/MS card slot-For inserting memory cards.
10. Home button-Return to home menu.
11. ESC-Return to the upper menu.
12. Music-Press to enter music mode.
13. Photo-Press to enter photo mode.
14. Music repeat play button.
15. AUX-Press to select audio source.
16. Menu-Press to show edit menu.
17. Video-Press to enter video mode
18. Music shuffle play button.
1. IR diode - Sends single
to the set.
2. Power ON/OFF button-
Switch set on or off.
3. Calendar button-Press to
enter calendar mode.
4. Mute button-Press to turn
off the volume. Press
again to restore.
5. Volume + and UP button
6. Left button
7. Enter/Play button-Enter
or play your selection.
8. Right button
9. Volume - and down button
To use the remote control for the first time, please pull out the tab on the remote control.
REMOTE CONTROL OPERATION
Replacing the remote control battery
Open the battery door as per illustration 1 and insert one CR2025 size battery (3V) into it according to the +
marking as per illustration 2.
PLUS in up
For the first time you use this digital photo frame, you need to store some files (music, photo, video) into the
internal memory or insert a card with music, photo files into the card slot.
1. Connect your set to AC power using the attached AC adaptor.
2. Press the POWER button on the speaker to turn on the set.
3. Connect the set and your compute by USB cord.
4. Store some picture, music, video files you like into the internal memory.
5. You can also insert the card into the card slot if you want to play the files on your card.
Complete above steps, right
picture will show on the screen,
and you are ready to enjoy this
multifunctional digital photo
frame. You can adjust to your
favorite watching angle by press
or pull the screen.
The home menu includes 7 selections, you can select the functions by pressing left or right buttons, then
press ENTER/PLAY button to confirm or directly press the function buttons (PHOTO, MUSIC, VIDEO, Calen-
dar) on the remote control to complete your operation. Press ESC button to return to upper menu. Press home
button to return to home menu directly. Press up and down buttons to adjust the volume during play.
Begin to use
1. Viewing the thumbnails
Enter the photo menu. The thumbnails of first 12 pho- tos show on the screen. You can press left and right
buttons to select the photo. Press ENTER/PLAY button to start the slide show play.
In thumbnail screen, you can press MENU button on the remote to show the edit menus, then use left and right
and ENTER/PLAY buttons to edit the photos. Copy: Copy selected photo to the memory storage you like.
Delete: Delete selected photo.
Rotate: Rotate selected photo.
Photo effect: Adjust the hue of the photo.
Select: Select the photos you like to play, press enter
again to abstain the selection.
2. Slide show playing
During pictures play by slide show, the music you stored in the memory will play together. You can press
up or down button to adjust the volume, press ENTER/ PLAY button to pause or return the play.
Press up or down button to
adjust the volume.
Press Repeat button to play the
Press shuffle button to play the
music in random order.
Press menu to switch to Playing
list, music detail or lyric mode
(only when lyric file exists).
During play, press MENU button
to show slide show menu. Press
direction and Enter/play buttons
to adjust the screen’s hue,
brightness, contrast, slide show
speed, slide show display mode,
full screen or normal screen,
background music on or off.
Enter the music menu. Select the music you want to
start to play by left or right button, press the ENTER/
PLAY button to play or pause the playback.
Enter the movie menu. Select the movie you want to
play by left or right button, press the ENTER/PLAY
button to play. Press up or down button to adjust the
Enter the file menu. The detail of the files in the current
source shows on the screen. You can press left or right
button to select the file, press MENU button to toggle
from COPY, DELETE, or return to the file, press EN-
TER/PLAY button to confirm.
Viewing Clock and Calendar (you should set the
correct date in advance. Please see next section)
Enter the calendar screen. Date and time show on the
screen. Green frame highlight intraday date. The pho-
tos play on the left small window as slide show. You can
press the left or right button to check the date on the
previous or next month. Press ENTER button to toggle
from calendar and clock.
Source (Selecting the play source, internal memory storage, memory card, or device connected to the
set by USB cable)
When your set has several file sources. You need to choose one source you like to play (internal memory
storage, memory card, or device connected to the set by the USB cable).
Enter the Source screen, and
select the source you want to
play by direction buttons,
press ENTER/PLAY button to
confirm. Then, when you use
the Photo, Music, or Video
function, all the files are from
the storage you selected.
Enter the setting screen. Press
up or down button to select the
item you want to set. Press
ENTER/PLAY button to confirm.
Press ESC to return to upper se-
A. Date and Time
Setting the calendar date and clock.
B. General setting
Setting the smart energy, brightness, language, default
and software updating.
C. Audio setting
Setting the music playing mode, shuffle on or off. Repeat one music, repeat all music or no repeat.
Show this set’s version, memory total storage and free storage.
For smart energy function:
When you select OFF, this unit will operate at full power mode, can’t save power.
When you select Scheduler 50% or Scheduler 100%, it will automatically work as power saving 50% or 100%
during nighttime (21:00~7:00), and will resume normal power mode during daytime (7:00 ~21:00).
When you select Save 20% or Save 50%, it will operate at that indicated power consumption rate in the full day.
PC Sync Display Function
We have a PC sync display software in the driver disc of this set. File name: EZ display.
You can install the software to your computer as the way you install any software. After installation, the
computer may remind you to restart the computer, do as the instruction. Then connect the DPF set and your
computer by USB cable, run the software, below soft- ware surface will show on you computer.
Click DISPLAY DEVICE, the display on your computer will also show on the screen of DPF set. Using this
function, two people can watch photos or movies on your computer and DPF set together. But no sound
come out from the DPF set. Select the selections under Mirror Display and Exten-
sion Display to adjust the display of the DPF screen. Select STORAGE DEVICE, computer screen will disap-
pear from the DPF screen, the DPF set will restore to a removable device for you to transfer files.
In case you meet some problems when you use this set, please read below informations before you call for technical
assistance or return the set.
1. Verify that there are correct files in the internal storage or you have
inserted a memory card or other component device into the proper slot.
Only JPEG/BMP/JPEG Progressive/ EXIF/MP3/WMA/AAC/WAV/M-Jpeg/
Mpeg4/H.264(D1) files can be played.
2. Enter to Source menu to select source.
1. The distance is too long or the angle exceeds 30 degrees.
2. The battery of the remote control is no power.
3. The remote sensor is perturbed by another luminous source
1. Please only use the attached AC adaptor. 2. Please check if the AC
adaptor firmly plugged into the power outlet. Make sure your out let has power.
3. Please remember to press the power button on the speaker to turn on the set.
4. One of the safety mechanisms may be operating. In this event, unplug the
set from power outlet and plug it again.
1. Please turn on the set when connect it to PC. 2. Please reconnect the set
and your PC. 3. Please try to plug the big plug of the USB cable to another
USB port of your PC.
This may be caused by an electrostatic environment. Please disconnect the set
from the power and reconnect it.
Your set dies or
goes back to its
It can’t be
connect the set
Regulation & Compliance
Federal Communications Commission (FCC) Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference received, in-
cluding interference that may cause undesirable operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the users authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Please read this Limited Warranty carefully. The limited warranty set forth below is given by GiiNii, the maker
of your new digital picture frame, when purchased in the United States of America through an authorized
retailer and used for non-commercial purposes. We warranty this product against manufacturing and
material defects for a period of 90 days from the date of purchase. Do not return your product to the retailer
for warranty claims.
1.Please maintain the Warranty Statement in a safe place along with your dated sales receipt. Please retain
the original box in the event you need to make a warranty claim. Returning your product for a warranty
claim in best done in the original box or an alternative package that ensure its safe return to GiiNii. Please
contact our Customer Service team about the appropriate return-shipping package.
2.GiiNii Customer Service and Technical Support: 1- 866-909-3550. Or, on line at: www.giinii.com.
3.Parts and Labor Coverage. During the first 90 days of ownership, GiiNii will repair or replace the product,
at its option, at no charge if the product is found to be defective due to material or manufacturing defects.
GiiNii will provide a new product of similar or greater value at its discretion. Or, provide new or rebuilt
replacement parts at its sole discretion. Replacement or repair of one part of the product does not constitute
replacement or repair of other parts of the product. The customer bears the responsibility to ship the
product back to GiiNii, at their cost. Pending review
of the product, that shipping cost will be refunded to the customer. To make a warranty claim, you must first
contact Customer Service and receive a Return Authorization Code. No repairs or replacements can be
made without a Return Authorization Code. After the first 90 days of ownership, repair costs are the
responsibility of the owner.
4.Excluded Items Not Covered by the Warranty:
a Cosmetic damage or damages due to accident,misuse, abuse or negligence;
b Commercial use of the product;
c Damage due to improper operation, improper maintenance, improper power supply;
d Customer inability to read, understand the provided instructions on how to properly use the product;
e Modifications of any part of the product in any way; f Damage resulting from unauthorized attempted
repair of the product;
g Damage resulting from acts of nature or God.
To make a Warranty Claim please have the following items:
a Your original dated proof of purchase from an authorized retailer in the United States;
b Your original package that your product was sold in.Your warranty claim will not be honored without the
original purchase receipt. If you do not have the original package, please consult with our Customer
Service team to determine the best way to return your product to us. GiiNii cannot be responsible for
damages incurred during return shipping; insurance is highly recommended.
c Please provide written statement (typed or printed in block letters) that describes why your product is
defective. On this document, you will need to include the Return Authorization Code provided by Customer
Service, as well as your Name, return address, and a daytime phone number. Return shipments to GiiNii
should be insured and sent via Registered Mail with proof of delivery.
GiiNii and its parent company, affiliates or subsidiaries shall not be liable for any incidental or consequential
damages for breach of any expressed or implied warranty on this product. Except to the extent
prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on
this product is limited in duration to the duration of this warranty. Application of this warranty may vary
by state; this warranty gives you specific legal rights and you may have others based on the state you live in.
If you need a replacement part for your GiiNii Digital Picture Frame, call us at 1-866-909-3550 or write to us at:
Changes or modifications to this unit not expressly
approved by GiiNii voids this warranty and may result
in personal injury and/or property.