PDF User Manual

  1. Home
  2. Manuals
  3. 3Jtech NetCAMit User Manual

3Jtech NetCAMit User Manual

Made by: 3Jtech
Type: User Guide
Category: IP Camera
Pages: 13
Size: 0.54 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

 

 

 

 

 

 

 

 

 

 

 

netCAMit 

 

 

User’s Guide 

 

 

 

 

Version: 1.0.0.2 

 

Date: October 30, 2008 

 

 

 

 

 

 

3JTech Co., Ltd. 

2F, No. 342, Fu-Shing N. Rd. 

Taipei, Taiwan 

Tel: +886-2-2500 6916 

e-mail: info@3jtech.com.tw

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

 

Revision History 

 

Version Date 

Changes 

1.0.0.0 

October 09, 2007 

First Release of netCAMit User’s Guide 

1.0.0.1 

December 12, 2007  Add the description of advanced network settings in Appendix B 

1.0.0.2 

October 30, 2008 

Remove the description about Trigger In / Out connectors 

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

 

Table of Contents: 

Revision History ------------------------------------------------------- 2 

TABLE OF CONTENTS: ------------------------------------------------- 3 

CHAPTER 1. PRODUCT OVERVIEW ---------------------------------------- 4 

1.1

 

I

NTRODUCTION

----------------------------------------------------- 4 

1.2

 

F

EATURES

-------------------------------------------------------- 4 

1.3

 

P

ACKAGE 

C

ONTENTS

------------------------------------------------- 4 

CHAPTER 2. PHYSICAL DESCRIPTION-------------------------------------- 5 

2.1

 

P

ANELS

---------------------------------------------------------- 5 

2.1.1 Front Panel --------------------------------------------------- 5 

2.1.2 Rear Panel ---------------------------------------------------- 5 

2.2

 

I

LLUSTRATION

----------------------------------------------------- 6 

2.2.1 Front Panel Information ------------------------------------------ 6 

RJ45 Network Connector -------------------------------------------- 6 

RJ22 Power Supply Connector ---------------------------------------- 6 

Lens ----------------------------------------------------------- 6 

RFIO Slot-------------------------------------------------------- 7 

2.2.2 Real Panel Information ------------------------------------------- 7 

Serial Number / Camera ID / Firmware version --------------------------- 7 

CHAPTER 3. ASSEMBLING CAMERA --------------------------------------- 8 

3.1

 

M

OUNTING 

M

ETHODS

------------------------------------------------ 8 

CHAPTER 4. RESET DEFAULT--------------------------------------------10 

APPENDIX A – TECHNICAL SPECIFICATIONS --------------------------------11 

APPENDIX B – ADVANCED NETWORK SETTINGS -----------------------------12 

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

 

1. Product Overview 

1.1 Introduction 

netCAMit is a Plug & Play IP camera with a CMOS image sensor as well as built-in IP address, 

Ethernet Software Stacks and Protocols. Plug netCAMit directly to a RJ45 Ethernet port and watch 

the camera site from anywhere around the world. Connecting directly to Ethernet networks, 

netCAMit is a standalone digital network camera requiring no server at the camera site. Through 

the trigger in/out functions, netCAMit will provide a complete security solution for you with the 

easiest installation. 

 

1.2 Features 

y    Low cost, DIY security camera – Simple installation and multiple mounting methods 
y    No computer is needed at monitored site 
y    Up to 8 users concurrently browsing the same camera 
y    Standard JPEG image format 
y    Trigger-in connector for connecting external sensor for extra security 
y    Trigger-out connector to alert other external device such as alarms 
y  Two-level password protection 
y    Optional security accessories package, including powerBox, RFIO, RF sensor and contact 

sensor for the wired/wireless trigger-in 

 

1.3 Package Contents 

─  1 x netCAMit camera 

─  1 x CD with setup software, user’s manual and quick installation guide 

─  1 x RJ45 Ethernet cable 

─  1 x Power adapter   

─  1 x Desktop / Wall & Ceiling mount 

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

 

2. Physical Description 

The following information contains the physical description of netCAMit camera. This includes the 

functions and the locations of each connector and indicator. The information provides useful 

reference when installing the product. Please familiarize yourself with netCAMit cameras. 

2.1 Panels 

2.1.1 Front Panel 

For more related description, please refer to the Section 2.2 and Section 2.2.1.   

 

           

 

2.1.2 Rear Panel 

For more related description, please refer to the Section 2.2 and Section 2.2.2. 

 

5

4

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

 

2.2 Illustration 

No. in 

Figures 

Name on 

netCAMit  

Description 

Remark 

RJ45 network 

connector 

To connect to the camera and 

Ethernet port via RJ45 cable 

Refer to section 2.2.1 for front 

panel information 

RJ22 power 

supply connector 

To connect to the camera and 

power adaptor via RJ22 

interface 

Refer to section 2.2.1 for front 

panel information 

Lens 

300k pixels CMOS sensor 

Refer to section 2.2.1 for front 

panel information 

4 RFIO 

slot 

To install the optional RFIO 

device 

Refer to section 2.2.1 for front 

panel information 

5 SW_1 

Press SW_1 button, then 

netCAMit will perform the 

power reset 

N/A 

SW_2 

Press and hold SW_2 button 

for 5~10 seconds to reset the 

camera to its factory defaults 

The green indicator LED of RJ45 

port will light when it is finished 

with the reset procedure 

Camera 

information 

Serial number, camera ID and 

firmware version 

Refer to section 2.2.2 for real 

panel information 

 

 

2.2.1 Front Panel Information 

RJ45 Network Connector 

netCAMit is designed for 10/100Mbps Ethernet networks. netCAMit connects to the network via 

category 5 cable. 

RJ22 Power Supply Connector 

netCAMit adopts unique RJ22 cable for power supply. The special featured RJ22 cable includes 

Input / Output (I/O) function. Simply connect the Input / Output cable to the desired device and no 

hardware jumper fixing on camera is required. 

Lens 

netCAMit box includes a standard 60° wide angle lens fixed to the camera. Other types of lens are 

also available upon request. Please note that different price may apply to different lenses. 

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

 

RFIO Slot 

Plug the optional RFIO device for the wireless trigger-in. 

 

2.2.2 Real Panel Information 

Serial Number / Camera ID / Firmware version 

The label sticker includes the serial number, camera ID and the firmware version of the camera.   

 

NOTE: 

If you have updated the camera firmware version, the firmware version information may no longer 

be valid. 

 

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

 

3. Assembling Camera 

netCAMit is designed for users to mount in three methods, including desktop, ceiling and wall (see 

the following figures). Please use the desktop strut or wall & ceiling strut separately to mount the 

camera based on your needs. The desktop strut is used for desktop mounting only, and the wall & 

ceiling strut is suitable for desktop, ceiling and wall mounting. The figures and description provided 

in the following section will assist you in assembling and installing the camera correctly. It is 

recommended to configure the camera before positioning the camera. The default method is the 

desktop mount with desktop strut. 

 

 Desktop Mount

 

Wall Mount

 

Ceiling Mount 

 

3.1 Mounting Methods 

netCAMit comes with a desktop mount as the default purchase. If users would like to adopt wall & 

ceiling mount, please follow the steps below. Procedures of ceiling mounting are the same as the 

ones of wall mounting. The difference between these two mounting methods lies in the position of 

screwing. Here we only take the wall mount of netCAMit for example to demonstrate the mounting 

method. 

(1) 

First, please unscrew and remove the desktop strut in advance.   

 

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

 

(2) 

Assemble the wall & ceiling strut coming with the package, and then fasten the   

     camera with the screw on the BACK of the camera. (For the ceiling mount, you should 

     fasten the camera with the screw on the TOP of the camera.   

 

(3) 

Link and lock the base coming with the package and strut together.   

 

(4) 

Before positioning the camera, please drill the wall at the desired position and screw the 

     fixed board. Then, hang the camera on the fixed board along the slot of the bottom. 

 

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

10 

   

4. Reset Default 

netCAMit provides “Reset Power” and “Reset Default” buttons that will be easy for users to reset 

the camera. The buttons locate in the back of the camera (See 1 and of the figure below). 

 

No. in 

Figures 

Name on 

netCAMit 

Description 

Remark 

SW_1 

Press SW_1 button then 

netCAMit will do the power reset.

N/A 

SW_2 

Press and hold SW_2 button for 

5~10 seconds to reset the 

camera to its factory defaults 

The green indicator LED of RJ-45 

port will light when it is finished with 

the reset procedure. 

 

Default Setting for netCAMit: 

1) DHCP 

2) 

If IP is not assigned within 30 seconds, the default IP then will become: 192.168.8.99:8299 

3) 

Public password: blank 

4) 

Supervisor password: blank 

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

11 

 

Appendix A – Technical Specifications 

 
z  Advanced 120 MIPS RISC processor( build in 64kB Flash program memory and 20kB SRAM 

data/program memory) 

z  4M x 16bits SDRAM 
z Lens: 

„  Focal Length:3.6 mm 
„  Aperture: F 2.0 
„  Angle of View (DIA): ~60 degrees 

z  RJ22 for 5V DC /100~240V AC adaptor and trigger input /output 
z  Image Sensor Specification: 

„  1/5” CMOS Sensor 
„  QCIF, QVGA and VGA 
„ 30 

frames/sec. 

„  Dynamic range: 72 dB 
„ Sensitivity: 1.0 V/LUX-Sec 

z  Trigger input: Normal Close to Open or Low to High TTL level 
z  Power Consumption: 5V DC/ 420mA 
z  International Image Standard 

„ 640x480, 

320x240, 176x144 

z  24bit Colored Motion JPEG images 
z Frame/Sec. 

„  640x480 @ 3 frames 
„  320x240 @ 8 frames 
„  176x144 @ 15 frames 

z Operating 

Environment: 

„ Temperature 

0~55

o

„  Humidity 80% relative at 25

o

z Network 

Protocol: 

„  UDP, TCP/IP, HTTP, NTP, DHCP, ARP, etc.

 

„  Automatically switch between 10/100baseT/TX Fast Ethernet 
„  Customized Network communication protocol for avoiding hackers 

z  Weight: 100g (without the stand) 
z  Dimension of Main Body: 43 x 52 x 95 mm (without the stand) 

 

Note: Any specification is subject to change without any notice

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

12 

 

Appendix B – Advanced Network

 

Settings 

If you are not using a router, very likely you are using a DSL modem with PPPoE for single PC or 

multiple PCs. If your Internet allows only one IP or has no more spare IP from PPPoE, you would 

need to buy a new router. If your PPPoE still have a spare IP, you could set up PPPoE for the 

camera. 

 

ƒ 

Set up a new router

 

Find out the type of your WAN port of your Internet service: fixed IP, DHCP or PPPoE. (Please ask 

your Internet Service Provider for the connection details and information). Setup the new router 

according to the manual comes with the new router. After your PC connected to the new router is 

able to connect to the Internet, please follow the Quick Installation Guide for netCAMit to set up 

your camera. 

 

ƒ 

Set up PPPoE for the camera

 

 

Please follow the steps below to set up your PC: 

 

 

 

 

1) Go to Start 

Æ Settings Æ Control Panel. 

2) Click “Network and Internet Connections”. 

 

 

 

 

 

 

 

 

 

3) Click “Network Connections”.

 

 


background image

http://www.3jtech.com.tw

 

http://www.pnpipcameras.com

 

netCAMit User’s Guide 

Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.) 

13 

 

 

 

4) Highlight the icon “Local Area Connection”, 

right click your mouse, and choose “Properties” 

function. 

 

 

 

 

 

 

 

 

 

5) Highlight “Internet Protocol (TCP/IP)”, and then press 

    Properties button. 

 

 

 

 

 

 

6) Choose “Use the following IP address”, and then 

   

follow the figure to input the IP address and Subnet 

   

mask. Finally, press OK button to exit the “Internet 

   

Protocol (TCP/IP) Properties” window. 

 

 

 

 

 

 

 

7) Press Close button to close the “Local Area Connection 

    Properties” window, and then follow eCAMit Deluxe User’s 

    Guide in CD to install the eCAMit Deluxe software to view 

  cameras.