PDF User Manual

  1. Home
  2. Manuals
  3. 3DVIA Racing 3DV-X1 Operation Manual

3DVIA Racing 3DV-X1 Operation Manual

Made by: 3DVIA Racing
Type: Operation Manual
Category: Motorized Toy Car
Pages: 5
Size: 6.95 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

3

3

D

D

V

V

-

-

X

X

1

1

3DVIA Racing

www.3DMOJO.com

OPERATION  MANUAL

 


background image

3DV-X1

OPERATION MANUAL

www.3DMOJO.com

1

SAFETY PRECAUTIONS

WARRANTY

PARTS GUARANTEE

When the safety precautions are followed, 
the 3DV-X1 will provide years of 
enjoyment.
Use care and good sense at all times when 
operating this radio controlled buggy. 
Failure to use this vehicle in a safe, 
sensible manner can result in injury or 
damage to property. You and you alone 
must insure that the instructions are 
carefully followed and all safety precautions 
are obeyed.

Do not operate the 3DV-X1 near 
people. Spectators should be behind 
the driver or at a safe distance away 
from the vehicle.

Make sure to read the instructions with 
the battery and charger before 
charging.

Do not cover the air intake holes on 
the charger during charging. This may 
cause the charger to overheat.

Do not allow the electronic speed 
control (ESC) or radio equipment to 
come into contact with moisture. Water 
can cause the electronics to short out 
and can cause permanent damage.

3DVIA Racing® guarantees this kit to 
be free from defects in both material 
and workmanship at the date of 
purchase. 3DVIA Racing will warranty 
this kit for 90 days after the purchase 
date. 

3DVIA Racing will repair or replace, at 
no charge, the incorrectly made part.

Make sure you save the receipt or 
invoice you were given when you 
bought your model! It is your proof of 
purchase and we must see it before 
we can honor the warranty. 

3DVIA Racing reserves the right to 
change or modify this warranty without 
notice.

In that 3DVIA Racing has no control 
over the final user assembly or 
material used for final user assembly, 
no liability shall be assumed nor 
accepted for any damage resulting 
from the use by the user of the final 
user-assembled product. By the act of 
using the user-assembled product, the 
user accepts all resulting liability.

We have engineered the 3DV-X1 to take 
the rough and tumble abuse that makes 
R/C fun. We are so confident of the quality 
and durability of the Stress-Tech plastic 
parts that we will replace any Stress-Tech 
plastic part you break during the first 12 
months you own the buggy. Just send in 
the part to us and we will send you a FREE 
replacement. Please see the 3DV-X1 parts 
list for the items covered under the Stress-
Tech guarantee.

To receive your free replacement part 
please send the following to the 3DVIA
Racing address listed under the warranty 
on the left.

1.

The broken part must be included.

2.

The part number and description 
of the broken part.

3.

Copy of your dated invoice or 
purchase receipt.

4.

Your name, phone number and 
shipping address.

HELPFUL HINTS

RETURNS

REPAIR SERVICE

Avoid working over a deep pile carpet. 
If you drop a small part or screw, it 
may be difficult to find.

Place a mat or towel over your work 
area. This will prevent parts from 
rolling off and will protect the work 
surface.

Avoid running the buggy in cold 
weather. The plastic and metal parts 
can become brittle at low 
temperatures. In addition, grease and 
oil become thick, causing premature 
wear and poor performance.

Test fit all parts before attaching them 
permanently.

To return your 3DV-X1 for repairs covered
under warranty you should send your 
buggy to:

3DVIA Racing

300 Baker Avenue

Concord, MA 01742

+1-800-693-9000 US and Canada

www.3DMOJO.com

Repair service is available anytime.

After the 90 day warranty, you can still 
have your 3DV-X1 repaired for a small 
charge. To speed up the repair process, 
please follow the instructions listed below.

1.

Under most circumstances return the 
ENTIRE vehicle. The exception would 
be sending in a Stress-Tech part. See 
the instruction under the Stress-Tech 
Guarantee.

2.

Make sure the transmitter is turned off, 
and all of the batteries are removed.

3.

Send written instructions

 


background image

3DV-X1

OPERATION MANUAL

www.3DMOJO.com

2

MAINTENANCE GUIDE

The following section is provided to help you with maintenance and repairs to your 3DV-X1. Pay extra attention to the 
notes and tips for proper assembly.

Front Suspension Arm, Front Shock Tower, 
Front Bumper

1. Attach the front bulkhead (51) to the chassis (1) 

using the bulkhead hinge pin (103).

2. Secure the bulkhead hinge pin in place using the 

3mm set screw (K).

3. Attach and secure the front suspension arms 

(38,39) to the front bulkhead using the front inner 
hinge pins (95).

4. Secure the rear of the front inner hinge pin with a 

2.5mm e-clip (S).

5. Install the front bulkhead brace (50) onto the two 

front inner hinge pins.

6. Secure the front bulkhead brace using 2.5mm e-

clips (S).

7. Attach the front shock tower (49) to the front 

bulkhead using four 3x10mm round head screws 
(C).

8.

Attach the front bumper (2) to the front bulkhead 
using four 4-40x5/16" fl at head screws (B).

 


background image

3DV-X1

OPERATION MANUAL

www.3DMOJO.com

3

MAINTENANCE GUIDE

The following section is provided to help you with maintenance and repairs to your 3DV-X1. Pay extra attention to the 
notes and tips for proper assembly.

Front Suspension Arm, Front Shock Tower, Front Bumper

9. Attach the front bulkhead (51) to the chassis (1) using the bulkhead hinge pin (103).

10. Secure the bulkhead hinge pin in place using the 3mm set screw (K).

 


background image

3DV-X1

OPERATION MANUAL

www.3DMOJO.com

4

UPGRADES

The following section is provided to help you with maintenance and repairs to your 3DV-X1. Pay extra attention to the notes 
and tips for proper assembly.

10330

10332

10333

10334

Off Road

Street