PDF User Manual

  1. Home
  2. Manuals
  3. 3Com SUPERSTACK 3 Quick Reference Manual

3Com SUPERSTACK 3 Quick Reference Manual

Made by: 3Com
Type: Quick Reference Guide
Category: Switch
Pages: 16
Size: 0.6 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

1

Summary of Software Features

This table 

summarizes the software features that are supported by the Switch 4400 Series 

Management Software Version 4.0x

.

 

* To make this operation available on the SuperStack 3 Switch 4400 SE, upgrade the product using the Switch 4400 SE 
Enhanced Software Upgrade (3C17207).

† This feature is only available on the Switch 4400 PWR (3C17205).

For further information on how each of these features operates on your Switch please refer to the 
Implementation Guide which is supplied on the CD-ROM that accompanies your Switch.

Feature

Switch 4400

Automatic IP Configuration

Supported using DHCP, BootP and Auto IP

Resilient Links

Supported

Aggregated Links

Supported stack-wide

Broadcast Storm Control

Supported

Virtual LANs (VLANs)

Support for up to 64 VLANs using the IEEE Std 802.1Q-1998

Link Aggregation Control Protocol (LACP)

Supported using the IEEE Std 802.3-2002 (incorporating 802.3ad)

Multicast Filtering

128 Multicast filter groups supported

IGMP filtering supported

Spanning Tree Protocol

Supported using the IEEE Std 802.1D, 1998 Edition

Rapid Spanning Tree Protocol

Supported using the IEEE Std 802.1w-2001

Roving Analysis Port

Supported

Webcache Support*

Supported

Basic Traffic Prioritization

Supported

Advanced Traffic Prioritization*

Supported

RMON

Four groups supported: Statistics, History, Alarms, Event

Email, SMS and Pager Notification of Events

Supported

Management

Web interface, command line interface, and SNMP supported

RADIUS Authentication of Switch Management 
Login*

Supported

Port Security

Disconnect Unauthorized Device (DUD) and Network Login* 
(using the IEEE Std 802.1X-2001) supported

Configuration Save and Restore

Supported

Power over Ethernet †

Supported (802.3af power over signal pairs)

S

UPER

S

TACK

®

 3 S

WITCH

4400 S

ERIES

 

M

ANAGEMENT

 Q

UICK

 R

EFERENCE

 G

UIDE

 


background image

2

Web Interface Map – Device View

System
Bridge
Physical Interface
Protocol
Security

Top-level Device View

Address Database
Broadcast Storm Control
Link Aggregation
Multicast Filter
Resilient Links
Spanning Tree
VLAN

Bridge Folder

Unit
Backup Configuration

*

Getting Started
Console
Control
Management
Telnet

Cache Config

System Folder

SnoopMode

IGMP Folder

Add
Aging Time
Find
Remove
Summary

Address Database Folder

Setup

Broadcast Storm Control

Folder

Modify
Summary

Link Aggregation Folder

IGMP

Multicast Filter Folder

Add Port
Admin State
LACP State
P
Remove Port

artner ID

Modify Folder

Create
Delete
Modify
Summary

Resilient Links Folder

Setup
Port

Spanning Tree Folder

Add Cache
Modify Cache
Remove Cache

Summary

*

*

*

Change TCP Port*

*

Cache Config Folder*

Create
Modify
Test
Delete
Summary

Alert Folder

Setup

Console Folder

Setup
Alert
Monitor

Management Folder

Connect

Telnet Folder

Initialize
Reboot
Software Upgrade

Control Folder

Name
Notepad

Unit

Folder

Modify
Summary

Monitor Folder

Ethernet
Power†

Physical Interface Folder

History-1 Hour
History-48 Hours

History Folder

History
Setup
Smart Autosensing
Statistics
Port Setup Summary

Ethernet Folder

Setup

IP Folder

Trusted IP Host
Authentication*
User

Device Folder

Modify

User Folder

Port Security
Secure Addresses
Detail*
Summary
System Mode
System Summary

Access Folder

Logins*
Statistics*
Summary*
System Mode*

Authentication Folder*

IP

Protocol Folder

Display*
Modify*

Accounting Folder*

Display*
Modify*

Authentication Folder*

Device
Network
RADIUS*

Security Folder

Accounting*
Authentication*
Retries*
Shared Secret*
Summary*

RADIUS Folder*

† This operation is only available on the Switch 4400 PWR (3C17205).

* To make this operation available on the SuperStack 3 Switch 4400 SE, upgrade
the product using the Switch 4400 SE Enhanced Software Upgrade (3C17207).

Save
Restore

Backup Configuration F

older

Access

Network Folder

Configure
Detail
Profile

Power Folder†

Display/Edit

VLAN Folder

Display/Edit

Secure Addresses

Folder

Display/Edit

Trusted IP Host Folder

 


background image

3

Web Interface Device Mimic

For example purposes only, this graphic shows a Switch 4400 PWR.

A Quick Guide to the Web Interface Operations

This table describes the operations that are available in the Web Interface.

Operation

What does the Operation do?

System Getting Started

Guides you through the initial configuration of the stack.

System Console Setup

Configures the type, speed and flow of a console port.

System Control Initialize

Initializes every unit in the stack to factory default settings.

System Control Reboot

Resets all units in the stack simultaneously.

System Control Software Upgrade

Upgrades the software on all units in the stack.

System Management Setup

Changes information for the stack.

System Management Alert Create

Creates and defines an email alert and its distribution.

System Management Alert Modify

Modifies an existing email alert and its distribution.

System Management Alert Test

Sends a test email alert.

System Management Alert Delete

Deletes an existing email alert.

System Management Alert Summary

Displays summary information for configured email alerts.

System Management Monitor Modify

Sets up a device or port to be monitored for email alerts.

System Management Monitor Summary

Displays summary information for devices or ports on which 
monitoring is enabled.

Unit

Setup

Statistics

Port Security

Name

Notepad

History-1 Hour

History-48 Hours

Port Setup Summary

Setup

Setup

 


background image

4

System Telnet Connect

Starts a Telnet session to the stack in a separate window.

System Unit Name

Assigns a name to the unit.

System Unit Notepad

Opens a notepad for the unit.

System Backup Configuration Save

Saves the current configuration of the stack to a file.

System Backup Configuration Restore

Restores the configuration of the stack from a file.

System Cache Config Add Cache*

Adds the IP address of a Webcache to the network.

System Cache Config Modify Cache*

Modifies the Webcache information.

System Cache Config Remove Cache*

Deletes a Webcache from the network.

System Cache Config Change TCP Port*

Specifies the TCP Port number for traffic to be redirected to a 
Webcache.

System Cache Config Summary*

Displays summary information for a Webcache set up on the network.

Bridge Address Database Add

Adds an address to the database.

Bridge Address Database Aging Time

Configures the aging period for the address database.

Bridge Address Database Find

Displays the location of a MAC address.

Bridge Address Database Remove

Deletes an address from the database.

Bridge Address Database Summary

Views all addresses that are stored against a particular port or 
aggregated link.

Bridge Broadcast Storm Control Setup

Configures Broadcast Storm Control parameters for the stack.

Bridge Link Aggregation Modify Add Port

Adds a port to an aggregated link.

Bridge Link Aggregation Modify Admin State

Changes the state of an aggregated link.

Bridge Link Aggregation Modify LACP State

Enables or disables LACP on a port.

Bridge Link Aggregation Modify Partner ID

Sets the Partner ID for an aggregated link.

Bridge Link Aggregation Modify Remove Port

Deletes a port from an aggregated link.

Bridge Link Aggregation Summary

Lists all of the aggregated links in the stack.

Bridge Multicast Filter IGMP SnoopMode

Configures IGMP multicast learning for the stack.

Bridge Resilient Links Create

Creates a resilient link on the stack.

Bridge Resilient Links Delete

Deletes a resilient link that is configured on the stack.

Bridge Resilient Links Modify

Sets the main or standby link on a resilient pair as the active link.

Bridge Resilient Links Summary

Displays details of all resilient links that are currently configured on the 
stack.

Bridge Spanning Tree Setup

Configures stack-wide spanning tree parameters.

Bridge Spanning Tree Port

Configures spanning tree per port.

Bridge VLAN Display/Edit

Displays and modifies current VLAN configuration.

Physical Interface Ethernet History History-1 Hour

Displays packet activity for all ports on a unit over the previous hour.

Physical Interface Ethernet History History-48 Hours

Displays packet activity for all ports on a unit over the previous 48 
hours.

Physical Interface Ethernet Setup

Sets up single or multiple Ethernet ports.

Physical Interface Ethernet Smart Autosensing

Configures smart autosensing for the stack.

Physical Interface Ethernet Statistics

Displays statistics for packet and error traffic on one or more ports.

Physical Interface Ethernet Port Setup Summary

Displays summary information for the stack.

Physical Interface Power Configure†

Displays and modifies power allocation for each port.

Operation (Continued)

What does the Operation do?

 


background image

5

* To make this operation available on the SuperStack 3 Switch 4400 SE, upgrade the product using the Switch 4400 SE 
Enhanced Software Upgrade (3C17207).

† This operation is only available on the Switch 4400 PWR (3C17205).

For detailed descriptions of the web interface operations and the command line interface (CLI) 
commands that you require to manage the Switch please refer to the Management Interface 
Reference Guide supplied in HTML format on the CD-ROM that accompanies your Switch.

Physical Interface Power Detail†

Displays power usage for a port.

Physical Interface Power Profile†

Displays power requirements for 3Com Power over Ethernet products.

Protocol IP Setup

Configures the IP information for the unit.

Security Device Trusted IP Host Display/Edit

Displays and configures current Trusted IP Host settings.

Security Device Authentication Logins*

Displays authentication attempts.

Security Device Authentication Statistics*

Displays authentication statistics.

Security Device Authentication Summary*

Displays summary information on authentication.

Security Device Authentication System Mode*

Modifies the authentication mode.

Security Device User Modify

Modifies the password of the current user.

Security Network Access Port Security

Sets the security mode of single or multiple ports on a unit.

Security Network Access Secure Addresses 
Display/Edit

Displays and configures Secure Address settings.

Security Network Access Detail*

Displays detailed information on port security settings.

Security Network Access Summary

Displays summary information on network access.

Security Network Access System Mode

Enables or disables network security.

Security Network Access System Summary

Displays summary information on the system security settings.

Security RADIUS Accounting Display*

Displays RADIUS accounting statistics.

Security RADIUS Accounting Modify*

Modifies RADIUS accounting configuration.

Security RADIUS Authentication Display*

Displays RADIUS authentication statistics.

Security RADIUS Authentication Modify*

Modifies RADIUS authentication configuration.

Security RADIUS Retries*

Modifies RADIUS retry parameters.

Security RADIUS Shared Secret*

Modifies RADIUS security key.

Security RADIUS Summary*

Displays summary information on RADIUS.

Operation (Continued)

What does the Operation do?

 


background image

6

Command Line Interface Map

To display sub-menus:
At the Select menu option prompt, 
enter the name of the menu or menus.

To display parent menus:
At the Select menu option prompt, 
enter 

quit.

To display the Top-level menu:
Press the [Esc] key.

To obtain help:
At the Select menu option prompt, 
enter 

?.

bridge
feature
gettingStarted
logout
physicalInterface
protocol
security
system
trafficManagement

Top-level Menu

cacheConfig*
rovingAnalysis

Feature Menu

addressDatabase
broadcastStormControl
linkAggregation

port
resilientLinks
spanningTree
summary
vlan

multicastFilter

Bridge Menu

addPort
name
removePort

Modify Menu

addPort

removePort
summary

autoDiscovery

RouterPort Menu

modify
queryMode
snoopMode

IGMP Menu

stpDefaultPathCost
stpForwardDelay
stpHelloTime
stpMaxAge
stpPriority
stpState
stpVersion

Spanning Tree Menu

create
delete
detail
modify
summary

VLAN Menu

add
agingTime
find
remove
summary

Address Database Menu

igmp
routerPort

Multicast Filter Menu

defaultPriority
detail
lacpState
linkTrap
stpCost
stpFastStart
summary

Port Menu

activePort
create
delete
linkState
summary

Resilient Links Menu

detail
modify
summary

Link Aggregation Menu

addPort
linkState
partnerID
removePort

Modify Menu

addCache*
changePort*
disableCache*
enableCache*
removeCache*
summary*

CacheConfig Menu*

add
remove
start
stop
summary

Roving Analysis Menu

† This operation is only available on the Switch 4400 PWR (3C17205)

* To make this operation available on the SuperStack 3 Switch 4400 SE, upgrade
the product using the Switch 4400 SE Enhanced Software Upgrade (3C17207).

Modify Menu

fastLeave

 


background image

7

access
authentication

user

*

ssh*
trustedIpHost

Device Menu

access

Network Menu

bridge
feature
gettingStarted
logout
physicalInterface
protocol
security
system
trafficManagement

Top-level Menu

device
network
radius*

Security Menu

create
delete
modify

summary

pwdRecover

User Menu

modify
summary

Access Menu

detail*
portSecurity
secureAddresses
summary
systemMode
systemSummary

Access Menu

logins
statistics
summary
systemMode

*

*

*

*

Authentication Menu*

accounting
authentication
retries

sharedSecret
summary

*

*

*

setup*

*

*

Radius Menu*

display
modify

*

*

Accounting Menu*

display
modify

*

*

Authentication Menu*

* To make this operation available on the SuperStack 3 Switch 4400 SE, upgrade
the product using the Switch 4400 SE Enhanced Software Upgrade (3C17207).

** This operation is only available on the SuperStack 3 4400 SE.

serverAuth
userAuth

*

*

SSH Menu*

hostKey
keyGen

*

*

Server Authentication Menu*

authentication
userKey

*

*

User

Menu

Authentication

*

add
remove
summary

Secure Addresses Menu

add
delete
mode
summary

Trusted IP Host Menu

copy
delete
detail
download
summary

*

*
*

*

*

User Key Menu*

ip

Protocol Menu

default
noDefault
summary

Route Menu

modify
summary

Interface Menu

basicConfig
initializeConfig
interface
ping
route

IP Menu

ethernet
power†

Physical Interface Menu

configure†
detail†
profile†
state†
summary†

Power Menu†

autoMDIX
detail
flowControl
portCapabilities
portMode
portState
smartAutosense
summary

Ethernet Menu

summary†

Profile Menu†

 


background image

8

backupConfig
control
inventory
license
management
summary
unit

System Menu

bridge
feature
gettingStarted
logout
physicalInterface
protocol
security
system
trafficManagement

Top-level Menu

qos

Traffic Management Menu

initialize
reboot
softwareUpgrade

Control Menu

restore
save

Backup Config Menu

select

Unit Menu

classifier*
profile
serviceLevel
trafficQueue
trafficShape*

*

*

QOS Menu

community
get
next
set
trap

SNMP Menu

create
delete
modify
summary

Trap Menu

modify
summary

Monitor Menu

addAddress
create
delete
modify
removeAddress
summary
test

Alert Menu

alert
contact
location
monitor
name
password
remoteAccess
snmp

Management Menu

* To make this operation available on the SuperStack 3 Switch 4400 SE, upgrade
the product using the Switch 4400 SE Enhanced Software Upgrade (3C17207).

create
delete
detail
modify
summary

*
*
*
*

*

Classifier Menu*

addClassifier

assign

detail
listPorts

*

addShaper*

*
*
*
*

*

*

*

removeShaper*

*

create
delete

modify
removeClassifier

summary

Profile Menu*

create
delete
modify
summary

*
*
*

*

Service Level Menu*

summary

Traffic Queue Menu

add**
state**
summary**

License Menu

** This operation is only available on the SuperStack 3 4400 SE.

Traffic Shape Menu*

create
delete
modify
summary

*
*
*

*

 


background image

9

A Quick Guide to the Command Line Interface Commands

This table describes the commands that are available in the Command Line Interface.

Command

What does the Command do?

bridge addressDatabase add

Adds a statically configured address.

bridge addressDatabase agingTime

Sets the bridge address aging time.

bridge addressDatabase find

Finds an address.

bridge addressDatabase remove

Removes an address.

bridge addressDatabase summary

Displays summary information on addresses.

bridge broadcastStormControl

Enables or disables broadcast storm control.

bridge linkAggregation detail

Displays detailed information on an aggregated link.

bridge linkAggregation modify addPort

Adds a port to an aggregated link.

bridge linkAggregation modify linkState

Enables or disables an aggregated link.

bridge linkAggregation modify partnerID

Sets the partnerID for an aggregated link.

bridge linkAggregation modify removePort

Removes a port from an aggregated link.

bridge linkAggregation summary

Displays summary information on an aggregated link.

bridge multicastFilter igmp modify fastLeave

Enables or disables IGMP fast leave.

bridge multicastFilter igmp queryMode

Enables or disables IGMP query mode.

bridge multicastFilter igmp snoopMode

Enables or disables IGMP Multicast learning.

bridge multicastFilter routerPort addPort

Adds a statically configured router port.

bridge multicastFilter routerPort autoDiscovery

Enables or disables router port auto discovery.

bridge multicastFilter routerPort removePort

Removes a router port.

bridge multicastFilter routerPort summary

Displays summary information on a router port.

bridge port defaultPriority

Sets the default 802.1D priority for untagged frames.

bridge port detail

Displays detailed information on a port.

bridge port lacpState

Enables or disables LACP on a port.

bridge port linkTrap

Enables or disables Port Link Traps.

bridge port stpCost

Sets the Spanning Tree path cost parameter.

bridge port stpFastStart

Enables or disables Spanning Tree fast start.

bridge port summary

Displays summary information on a port.

bridge resilientLinks activePort

Sets the active resilient link port.

bridge resilientLinks create

Creates a resilient link.

bridge resilientLinks delete

Deletes a resilient link.

bridge resilientLinks linkState

Enables or disables the resilient link pair.

bridge resilientLinks summary

Displays summary information on a resilient link pair.

bridge spanningTree stpDefaultPathCost

Sets the bridge Spanning Tree default path costs.

bridge spanningTree stpForwardDelay

Sets the bridge Spanning Tree forward delay parameter.

bridge spanningTree stpHelloTime

Sets the bridge Spanning Tree hello time parameter.

bridge spanningTree stpMaxAge

Sets the bridge Spanning Tree maximum age parameter.

bridge spanningTree stpPriority

Sets the bridge Spanning Tree priority parameter.

 


background image

10

bridge spanningTree stpState

Enables or disables Spanning Tree on a bridge.

bridge spanningTree stpVersion

Selects the version of Spanning Tree to run on the bridge.

bridge summary

Displays bridge information for the unit.

bridge vlan create

Creates a VLAN.

bridge vlan delete

Deletes a VLAN.

bridge vlan detail

Displays detailed information on a VLAN.

bridge vlan modify addPort

Adds a port to a VLAN.

bridge vlan modify name

Names a VLAN.

bridge vlan modify removePort

Removes a port from a VLAN.

bridge vlan summary

Displays summary information on a VLAN.

feature cacheConfig addCache*

Adds the IP address of a Webcache to the network.

feature cacheConfig changePort*

Changes the TCP port number redirected.

feature cacheConfig disableCache*

Disables redirection to a Webcache on the network.

feature cacheConfig enableCache*

Enables redirection to a Webcache on the network.

feature cacheConfig removeCache*

Removes the IP address of a Webcache from the network.

feature cacheConfig summary*

Displays summary information for the redirection feature.

feature rovingAnalysis add

Configures the roving analysis port.

feature rovingAnalysis remove

Clears the roving analysis port.

feature rovingAnalysis start

Starts monitoring the roving analysis port.

feature rovingAnalysis stop

Stops monitoring the roving analysis port.

feature rovingAnalysis summary

Displays summary information on the roving analysis port.

gettingStarted

Guides you through the initial configuration of the stack.

logout

Logs out of the Command Line Interface.

physicalInterface ethernet autoMDIX

Enables or disables auto MDIX on a port.

physicalInterface ethernet detail

Displays detailed information on an Ethernet port.

physicalInterface ethernet flowControl

Enables or disables flow control.

physicalInterface ethernet portCapabilities

Sets the port capabilities.

physicalInterface ethernet portMode

Sets the port speed and duplex mode.

physicalInterface ethernet portState

Enables or disables an Ethernet port.

physicalInterface ethernet smartAutosense

Enables or disables smart autosensing.

physicalInterface ethernet summary

Displays summary information on an Ethernet port.

physicalInterface power configure †

Configures Power over Ethernet on a port by port basis.

physicalInterface power detail †

Displays Power over Ethernet details for one port.

physicalInterface power profile summary †

Displays power requirements for 3Com Power over Ethernet 
products.

physicalInterface power state †

Enables or disables Power over Ethernet on a port by port 
basis.

physicalInterface power summary †

Displays a summary of Power over Ethernet on a port by port 
basis.

protocol ip basicConfig

Performs basic IP management configuration.

Command (Continued)

What does the Command do?

 


background image

11

protocol ip initializeConfig

Resets IP information to factory defaults.

protocol ip interface modify

Modifies IP interface information.

protocol ip interface summary

Displays summary information on the IP interface.

protocol ip ping

Polls remote devices.

protocol ip route default

Defines the default route in the routing table.

protocol ip route noDefault

Removes the default route from the routing table.

protocol ip route summary

Displays summary information on the routing table.

security device access modify

Modifies access rights.

security device access summary

Displays summary information on access rights.

security device authentication logins*

Displays authentication attempts.

security device authentication statistics*

Displays authentication statistics.

security device authentication summary*

Displays summary information on authentication.

security device authentication systemMode*

Modifies the authentication mode.

security device ssh serverAuth hostKey

Displays the host public key.

security device ssh serverAuth keyGen

Generates a new host key.

security device ssh userAuth authentication

Defines user authentication method.

security device ssh userAuth userkey copy

Copies a user public key.

security device ssh userAuth userkey delete

Deletes a user public key.

security device ssh userAuth userkey detail

Displays a user public key.

security device ssh userAuth userkey download

Downloads a user public key.

security device ssh userAuth userkey summary

Displays summary information on user keys.

security device trustedIPhost add

Adds a Trusted IP Host or subnet.

security device trustedIPhost delete

Removes a Trusted IP Host or subnet.

security device trustedIPhost mode

Enables or disables a Trusted IP Host.

security device trustedIPhost summary

Displays Trusted IP Host information.

security device user create

Creates a user.

security device user delete

Deletes a user.

security device user modify

Modifies a user.

security device user pwdRecover

Enables or disables password recovery.

security device user summary

Displays summary information on users.

security network access detail*

Displays summary information on port users.

security network access portSecurity

Enables or disables DUD and NTK.

security network access secureAddresses add

Add a secure MAC address to a port.

security network access secureAddresses remove

Removes a secure MAC address from a port.

security network access secureAddresses summary

Displays the secure MAC addresses on specified ports..

security network access summary

Displays summary information on port security settings.

security network access systemMode

Enables or disables network security.

security network access systemSummary

Displays summary information on the system security settings.

security radius accounting display*

Displays RADIUS accounting statistics.

Command (Continued)

What does the Command do?

 


background image

12

security radius accounting modify*

Modifies RADIUS accounting configuration.

security radius authentication display*

Displays RADIUS authentication statistics.

security radius authentication modify*

Modifies RADIUS authentication configuration.

security radius retries*

Modifies RADIUS retry parameters.

security radius setup*

Performs RADIUS configuration.

security radius sharedSecret*

Modifies RADIUS security key.

security radius summary*

Displays summary information on RADIUS.

system backupConfig restore

Restores the configuration of the stack from a file.

system backupConfig save

Saves the current configuration of the stack to a file.

system control initialize

Resets to factory defaults.

system control reboot

Performs a system reboot.

system control softwareUpgrade

Performs an agent software upgrade.

system inventory

Displays stack information.

system license add**

Adds a license for a software feature.

system license state**

Enables or disables an installed software feature license.

system license summary**

Displays summary information for all installed software 
feature licenses.

system management alert addAddress

Adds an email address to an alert.

system management alert create

Creates an alert.

system management alert delete

Deletes an alert.

system management alert modify

Modifies an existing alert.

system management alert removeAddress

Removes an email address from an alert.

system management alert summary

Displays summary information for the alert settings.

system management alert test

Generates a test alert.

system management contact

Sets the system contact.

system management location

Sets the system location.

system management monitor modify

Modifies a monitored item.

system management monitor summary

Displays summary information for monitored items.

system management name

Sets the system name.

system management password

Sets the system password.

system management remoteAccess

Changes remote access permissions.

system management snmp community

Sets the SNMP community string.

system management snmp get

Gets SNMP objects.

system management snmp next

Gets the next SNMP objects.

system management snmp set

Sets SNMP objects.

system management snmp trap create

Creates a trap destination.

system management snmp trap delete

Deletes a trap destination.

system management snmp trap modify

Modifies a trap destination.

system management snmp trap summary

Displays summary information on a trap destination.

Command (Continued)

What does the Command do?

 


background image

13

* To make this operation available on the SuperStack 3 Switch 4400 SE, upgrade the product using the Switch 4400 SE 
Enhanced Software Upgrade (3C17207).

** This operation is only available on the SuperStack 3 Switch 4400 SE.

† This operation is only available on the Switch 4400 PWR (3C17205).

For detailed descriptions of the web interface operations and the command line interface (CLI) 
commands that you require to manage the Switch please refer to the Management Interface 
Reference Guide supplied in HTML format on the CD-ROM that accompanies your Switch.

system summary

Displays a summary of system information.

system unit select

Inputs commands to another unit.

trafficManagement qos classifier create*

Creates a classifier.

trafficManagement qos classifier delete*

Deletes a classifier.

trafficManagement qos classifier detail*

Displays detailed classifier information.

trafficManagement qos classifier modify*

Modifies a classifier.

trafficManagement qos classifier summary*

Displays summary information on classifiers. 

trafficManagement qos profile addClassifier*

Adds a classifier to a QoS profile.

trafficManagement qos profile addShaper*

Adds a traffic shaper to a QoS profile.

trafficManagement qos profile assign*

Assigns QoS profiles to ports.

trafficManagement qos profile create*

Creates a QoS profile.

trafficManagement qos profile delete*

Deletes a QoS profile.

trafficManagement qos profile detail*

Displays detailed information about a QoS profile.

trafficManagement qos profile listPorts*

Lists all ports with their associated QoS profiles.

trafficManagement qos profile modify*

Modifies a QoS profile.

trafficManagement qos profile removeClassifier*

Removes a classifier from a QoS profile.

trafficManagement qos profile removeShaper*

Removes a traffic shaper from a QoS Profile.

trafficManagement qos profile summary*

Displays a summary of QoS profiles.

trafficManagement qos serviceLevel create*

Creates a service level.

trafficManagement qos serviceLevel delete*

Deletes a service level.

trafficManagement qos serviceLevel modify*

Modifies a service level.

trafficManagement qos serviceLevel summary*

Displays summary information on service levels.

trafficManagement qos trafficQueue summary

Displays summary information on traffic queues.

trafficManagement qos trafficShape create*

Creates a new traffic shaper.

trafficManagement qos trafficShape delete*

Deletes an existing traffic shaper.

trafficManagement qos trafficShape modify*

Modifies an existing traffic shaper.

trafficManagement qos trafficShape summary*

Displays summary information on a traffic shaper.

Command (Continued)

What does the Command do?

 


background image

14

 


background image

15

 


background image

16

Copyright © 2004, 3Com Corporation. All rights reserved.
Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other countries.
3Com, the 3Com logo and SuperStack are registered trademarks of 3Com Corporation.
IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Inc.
Other brand and product names may be registered trademarks or trademarks of their respective holders.

Part Number: DQA1720-3AAA06

Published: March 2004