PDF User Manual

  1. Home
  2. Manuals
  3. 2Face Time Keeper Manual

2Face Time Keeper Manual

Made by: 2Face
Type: Manual
Category: Personal Care Products
Pages: 18
Size: 1.47 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

ONE DEVICE - MULTIPLE SKINCARE SOLUTIONS

Time Keeper

Combining LED 
and Micro-current 
therapy to treat signs 
of aging
and skin problems.

Fine Lines & Wrinkles

       Pigmentation

Fine Lines

Uneven 

  Tone

Face Lift

Frown

 Lines

Breakouts

Dark Circles

 Acne &

Bacteria

Dark Spots

FACE EVOLUTION

‘Enhance your

skin with the

revolutionary

Time Keeper’ 

2Face: Face Evolution 

 


background image

Contents

1 Recommendation of Use

      1.1 Warnings 

      1.2 Precautions 

      1.3 Adverse Reactions 

      1.4 Travel Tips 

2 Intended Use & Indications for Use 

3 Product Description 

      3.1 Accessories List 

      3.2 Function Introduction 

      3.3 Main Device 

4 Using Instructions 

      4.1 Activate the Photon Ionic Ultrasonic Facial  

Stimulator 

      4.2 Select Mode 

      4.3 Adjust Intensity 

      4.4 Set Working-time 

      4.5 Treatment 

      4.6 Switch the Photon Ionic Ultrasonic Facial 

Stimulator off 

      4.7 After Treatment 

      4.8 Charging 

5 Maintenance 

      5.1 Cleaning 

      5.2 Trouble Shooting 

      5.3 Disposal of Electrical and Electronic 

Equipment Waste (E-waste) 

6 Service 

      6.1 Outside Warranty Period 

7 Safety, EMC & Biocompatibility 

8 Product Information 

      8.1 Specification 

      8.2 Mode Specification Table 

      8.3 Label & Symbols 

9 Manufacturer Information 

 


background image

THE BLUE LIGHT (430-450 nm 

Wavelength)

The blue light penetrating about 0.5mm 

has the function of calming against skin 

rashes; suitable for the skin which is 

sensitive, oily and with skin rashes. It can 

adjust skin sebum secretion, effectively 

get rid of acne and whelk to reach the aim 

of beautification. Besides, the blue light 

can astringent and tighten loosened skin.

THE RED LIGHT (620-730 nm 

Wavelength)

The red light penetrating 8-10mm is 

suitable for any type of skin; it can reach 

derma to stimulate fiber cells. Heating 

can improve blood circulation and 

collagen albumen hyperplasia to reduce 

wrinkles and make skin more elastic and 

smooth. The mild wave length is suitable 

for surrounding eyes and forehead.

THE GREEN LIGHT (525-550 nm 

Wavelength)

The green light between red light and 

blue light is suitable for mixed skin. It can 

improve the function of alternating use of 

cells and oxygen and activate the 

micro-circulation function of body surface. 

Meanwhile, calming the skin can make 

both body and skin relax, and reduce the 

pain of skin.

LED (WARM LIGHT THERAPY - All the 

Red, Blue and Green lights work 

together)

ONE DEVICE - MULTIPLE SKINCARE SOLUTIONS

The light based part of the treatment 

gently warms the top layer of your skin to 

target the most visible fine lines and 

enlarged pores. Almost instantly the 

texture of your skin is improved. As you 

continue to use the device, the light 

penetrates on a deeper level to work on 

deeper wrinkles and discoloration.

EMS (GENTLE MICRO-CURRENT  

TREATMENT)

The micro-current therapy works by 

mimicking and gently accelerating the 

normal cell activity of skin which can slow 

down with age. Oxygen is more easily 

absorbed, damaged tissue is repaired 

and collagen production is increased. 

RECOMMEND USE - ENSURE YOUR BEST 

RESULTS!

30 Secs

per skin

section

A few product tips and tricks:

 

• To use, glide along skin for up 

to 30 seconds per skin quadrant 

(cheeks, chin, forehead, T-zone).

• Follow with serum and your 

favorite skin care products. 

• For the first 4 weeks use up to 

3 times per week. After initial 

treatment period is done, use 

weekly for maintenance.

1

2

 


background image

Fine Lines & Wrinkles

      Pigmentation

Frown

 Lines

Fine Lines

Dark Circles

Dark Spots

Face Lift

 Acne &

Bacteria

Uneven

  Tone

Breakouts

Suggested treatment 

regimens: 

Reduce Wrinkles: Pay special 

attention to deep wrinkles and 

use a combined LED/EMS 

repeated massage treatment, 

using circular motions and 

paying special attention to 

deepest skin creases. 

Eye Pick Me Up: Targeting the 

outer area of the eyes (past 

brow bone, nearest to cheeks) 

work outward in a starburst 

formation of lines extending 

past the eye area. Make sure 

to keep eyes closed during 

actual treatment period when 

device is turned on and do not 

use device in immediate eye 

area. 

Lip Area: Target pucker area 

around lips by making tiny 

movements immediately 

outside of the lip area and into 

the marionette lines that 

extend from the outer corner 

of lips. Do not use product 

on lips. 

1 Recommendation of Use

Please read the complete instruction manual before 

you use the 2 Face / Face Evolution (Model: 2 Face / 

Face Evolution). It will give you a better understanding 

of how the product works, and you’ll be able to enjoy 

the best results.

1.1 Warnings

1) DO NOT use over swollen, infected, or inflamed 

areas or skin eruptions, e.g. phlebitis, 

thrombophlebitis, broken capillaries, varicose veins, 

etc.

2) DO NOT use in the eye area (circular muscles 

within the orbital rim), on the temples, on the mid-line 

of the neck (bone of neck), or in the breast or groin 

area.

3) DO NOT apply stimulation across your chest as the 

introduction of electrical current into the chest may 

cause rhythmic disturbances to your heart, which 

could be lethal.

4) DO NOT use while driving, operating machinery or 

during any activity in which involuntary muscle 

contractions may put the user at undue risk of injury.

5) Never operate this device if it is not working 

properly, if it has been dropped or damaged, or 

submerged in water.

6) Never drop or insert any object into any openings 

on the device. Return the device to Heat In a Click for 

examination and repair if you believe that the device is 

not working properly.

7) DO NOT use the device when it is charging.

8) Use of controls or adjustments, or the performance 

of procedures other than those specified herein, may 

result in injury.

9) Keep all electrical appliances (including the device) 

3

4

 


background image

away from water (including baths, showers, and sinks).

10) If the device begins to overheat, turn off 

immediately.

11) Stop using the device immediately if you suspect 

the device to be malfunctioning, or not operating 

properly.

12) DO NOT disassemble the device as this may 

cause damage, malfunction, electrical shock, fire or 

injury. There are no user-serviceable parts inside. 

Note: Disassembly voids the warranty.

13) Use of accessories, DC Charging Adapter and 

cables other than those specified, with the exception of 

DC Charging Adapter and cables sold by the 

manufacturer of the device as replacement parts for 

internal components, may result in increased 

emissions or decreased immunity of the system.

1.2 Precautions

The device is designed for cosmetic use only and for 

individuals in good health. If this is not the case for 

you, please consult your doctor before use.

1) If using the device causes any discomfort, 

discontinue use immediately.

2) If you suspect that you have had a negative reaction 

from using the device, consult your doctor 

immediately.

3) If you have suspected or diagnosed heart disease, 

you should follow precautions recommended by your 

doctor.

4) Caution should be used in the following situations:

--for patients with suspected or diagnosed heart 

problems

--for patients with suspected or diagnosed epilepsy

--when there is a tendency to hemorrhage following 

acute trauma or fracture

--over areas of the skin which lack normal sensation

5) The long-term effects of stimulation are unknown. 

The safety of the mini device for use during 

pregnancy has not been established.

6) A slight tingling sensation may occur while using 

the device. Lowering the intensity may reduce or 

eliminate this sensation.

7) The device is intended for cosmetic use on the 

face. Any harmful consequence resulting from 

misuse, application to other body areas, connection to 

improper voltage sources, dirty conductive solution or 

any other improper applications is neither the 

responsibility of Palm NRG Gel Prime nor its affiliates.

8) Electronic monitoring equipment, such as ECG 

monitors and ECG alarms, may not operate properly 

when the device is in use.

9) Do not store the device in the sun or on a hot 

surface. High temperatures may be damaging. The 

device should be operated, transported and stored in 

the manner specified in this manual. Failure to use 

and maintain the device in according with the 

instructions outlined in this manual will void the 

warranty.

10) Only use the power adapter provided with the 

mini device.

11) Do not scratch or damage the device.

12) The device needs special precautions regarding 

EMC. Do not use near known sources of EMI such as 

CT scanners, RFID, security systems (e.g. Metal 

detector, EAS), shortwave radios or microwave 

equipment. Note: Some sources of Radio Frequency 

emitters may not be visible to the user. If you 

experience unexpected behavior of the product then it 

is possible some external electromagnetic 

interference is responsible. You should remove this 

source and restart the product to restore full 

5

6

 


background image

operation.

1.3 Adverse Reactions

1) You should stop using the device and should consult 

with your physician if you experience adverse reactions 

from the device.

1.4 Travel Tips

The device’s lightweight, compact design makes it an 

easy travel companion. There are some travel tips for 

you:

1) If traveling outside the U.S., do not use the device if 

the electrical outlet is without AC100-240V 50Hz/60Hz.

2) Check with the carrier to confirm that the device can 

be carried and/or used on the airplane.

2 Intended Use & Indications for Use

2 Face / Face Evolution is a hand-held device for 

over-the-counter cosmetic use.

The EMS Mode is intended for facial stimulation for 

toning. 

And the Photon Infrared Mode is intended to be placed 

directly on the skin to get a nice feeling and provide 

topical heating with the temperature 41 ℃±2℃.

3 Product Description

2 Face / Face Evolution (Model: 2 Face / Face 

Evolution) is a multifunctional comprehensive beauty 

instrument. It’s combined with the most effective two 

kinds of techniques of internationally recognized skin 

care: the EMS Mode is intended for facial stimulation 

for toning and the Photon Infrared Mode is intended to 

be placed directly on the skin to get a nice feeling. 

Novel appearance, 2 Face / Face Evolution can apply 

physical energy without damage, to stimulate personal 

cell vitality of skin, accelerate microcirculation, enhance 

oxygen supply and metabolism, and promote collagen 

generation and nutrition absorption, thus reach really 

tightening and tendering skin, whitening and relieving 

spot, delaying the aging of skin. You can enjoy the star 

SPA care of beauty salon at home.

3.1 Accessories List 

No.    Name    Quantity                 Picture

2 Face 

/ Face 

Evolution 

Device

2 Face 

/ Face 

Evolution

Gel Primer

DC 

Charging 

Adapter

User 

Manual

1

1

1

1

1

2

3

4

3.2 Function Introduction

2Face is a hand-held device for over-the-counter 

cosmetic use. 

   1) EMS Mode

The EMS Mode is intended for facial stimulation for 

toning.

   2) Photon Heating Mode

The Photon heating Mode is intended to be placed 

directly on the skin to get a nice feeling and heating 

therapy and provide topical heating with the 

temperature 41 ℃±2℃.

7

8

 


background image

3.3 Main Device

3.3.1 Buttons

  

              Figure 3-1. Keyboard of Main Device

1) EMS button

When you choose EMS Mode:

--Turn unit ON by pressing the EMS button on the 

front of your device. 

--Adjust the intensity level to your comfort by 

progressively pressing the EMS button to increase or 

decrease the microcurrent output. As you toggle 

between the 3 intensity levels, the number of 

illuminated blue lights will change. At the 0 level no 

light will be illuminated, and there are no microcurrent 

output. At 1 level, all one blue lights will be 

illuminated. At the 2 level two blue light will be 

illuminated. At the 3 level three blue light will be 

illuminated.

--Turn off the 2Face/Face Evolution Device by 

pressing the EMS button after every treatment. The 

device will emit a beep when device is turning off. 

The 2 Face / Face Evolution Device will automatically 

turn off after approximately 5 minutes of use.

2) PHOTON button

It provides continuous heat therapy through the use of 

PHOTON function. SuS304 treatment probe is 

intended to be placed directly on the skin to provide 

topical heating. (41℃±2℃)

When you choose PHOTON Mode:

--Turn the unit ON by pressing the PHOTON button. 

The first light is Green Light, to show the Photon 

function is turned on. It has low power testing function, 

when the power is lower than 3.0Volts, the green 

indicate light will be twinkling.

--The Second light is RGB Light, which shows the 

Photon therapy mode is working. Adjust the Light 

mode to your aimed function by pressing the 

PHOTON button repeatedly. Place the treatment 

surface (massage head) on your skin, the RGB Light 

Indicator will automatically activate.

Apply light pressure while slowing moving the device 

in small circular motions, the treatment surface 

temperature will slowly increase.

Perform the treatment for 5-7 minutes on each area.

Press one time, the Red light works and the RGB 

Light Indicator turns Red;

Press second time, the Green light works and the 

RGB Light Indicator turns Green;

Press third time, the Blue light works and the RGB 

Light Indicator turns Blue;

Press forth time, the White light works and the RGB 

Light Indicator turns white。 It means all the Red, 

Green and Blue lights work simultaneously.

-- The Third light is Red-Green double color light, 

when charging, the light turns red and it will turn to 

Green when full charged.

--Turn the unit OFF by pressing the PHOTON button. 

There is 1 minutes for the device to detect the human 

body induction. The device will turn off automatically if 

no human body were detected in 1 minutes.

3.3.2 Indicator

1) EMS Mode intensity Indicator 

As you toggle between the 4 intensity levels, an 

audible beep is emitted and the number of illuminated 

blue lights will change. At maximum level, all 3 blue 

lights will be illuminated. At the minimum level no blue 

light will be illuminated.

2) PHOTON Mode Working Indicator

Turn the unit ON by pressing the PHOTON button, the 

Working indicator (green light) will light up. It has low 

power testing function, when the power is lower than 

3.0Volts, the green indicate light will be twinkling.

3) Photon Mode Indicator lights

The Second light is RGB Light, which shows the 

Photon therapy mode is working. Adjust the Light 

mode to your aimed function by pressing the 

PHOTON button repeatedly. Place the treatment 

surface (massage head) on your skin, the RGB Light 

Indicator will automatically activate.

4) Charging Indicator.

The Charging Indicator light is Red-Green double 

color light, when charging, the light turns red and it will 

turn to Green when full charged.

9

10

 


background image

3.3 Main Device

3.3.1 Buttons

  

              Figure 3-1. Keyboard of Main Device

1) EMS button

When you choose EMS Mode:

--Turn unit ON by pressing the EMS button on the 

front of your device. 

--Adjust the intensity level to your comfort by 

progressively pressing the EMS button to increase or 

decrease the microcurrent output. As you toggle 

between the 3 intensity levels, the number of 

illuminated blue lights will change. At the 0 level no 

light will be illuminated, and there are no microcurrent 

output. At 1 level, all one blue lights will be 

illuminated. At the 2 level two blue light will be 

illuminated. At the 3 level three blue light will be 

illuminated.

--Turn off the 2Face/Face Evolution Device by 

pressing the EMS button after every treatment. The 

device will emit a beep when device is turning off. 

The 2 Face / Face Evolution Device will automatically 

turn off after approximately 5 minutes of use.

2) PHOTON button

It provides continuous heat therapy through the use of 

PHOTON function. SuS304 treatment probe is 

intended to be placed directly on the skin to provide 

topical heating. (41℃±2℃)

When you choose PHOTON Mode:

--Turn the unit ON by pressing the PHOTON button. 

The first light is Green Light, to show the Photon 

function is turned on. It has low power testing function, 

when the power is lower than 3.0Volts, the green 

indicate light will be twinkling.

--The Second light is RGB Light, which shows the 

Photon therapy mode is working. Adjust the Light 

mode to your aimed function by pressing the 

PHOTON button repeatedly. Place the treatment 

surface (massage head) on your skin, the RGB Light 

Indicator will automatically activate.

Apply light pressure while slowing moving the device 

in small circular motions, the treatment surface 

temperature will slowly increase.

Perform the treatment for 5-7 minutes on each area.

Press one time, the Red light works and the RGB 

Light Indicator turns Red;

Press second time, the Green light works and the 

RGB Light Indicator turns Green;

Press third time, the Blue light works and the RGB 

Light Indicator turns Blue;

Press forth time, the White light works and the RGB 

Light Indicator turns white。 It means all the Red, 

Green and Blue lights work simultaneously.

-- The Third light is Red-Green double color light, 

when charging, the light turns red and it will turn to 

Green when full charged.

--Turn the unit OFF by pressing the PHOTON button. 

There is 1 minutes for the device to detect the human 

body induction. The device will turn off automatically if 

no human body were detected in 1 minutes.

3.3.2 Indicator

1) EMS Mode intensity Indicator 

As you toggle between the 4 intensity levels, an 

audible beep is emitted and the number of illuminated 

blue lights will change. At maximum level, all 3 blue 

lights will be illuminated. At the minimum level no blue 

light will be illuminated.

2) PHOTON Mode Working Indicator

Turn the unit ON by pressing the PHOTON button, the 

Working indicator (green light) will light up. It has low 

power testing function, when the power is lower than 

3.0Volts, the green indicate light will be twinkling.

3) Photon Mode Indicator lights

The Second light is RGB Light, which shows the 

Photon therapy mode is working. Adjust the Light 

mode to your aimed function by pressing the 

PHOTON button repeatedly. Place the treatment 

surface (massage head) on your skin, the RGB Light 

Indicator will automatically activate.

4) Charging Indicator.

The Charging Indicator light is Red-Green double 

color light, when charging, the light turns red and it will 

turn to Green when full charged.

3.3.3 Working Modes

There are 2 working modes, and choose different 

programs by pressing Mode button of different times.

1

2

Program      Name      Display          Description

EMS 

Mode

Photon 

Mode

Output the 

EMS

Output the 

Photon and 

heat

4 Using Instructions

4.1 First Use And Preparation

1) Remove your 2 Face / Face Evolution Device, DC 

Charging Adaptor from the box.

2) Insert the DC plug of adaptor into DC hold of the 

device.

3) Connect the Power plug into an electrical outlet 

(AC100-240V 50Hz/60Hz 0.2A). When charging, the 

Red-Green double color light turns red and it will turn 

to Green when full charged.

Note: 

a) Charge your 2 Face / Face Evolution Device for 12 

hours before the first use. When charging, the 

Red-Green double color light turns red and it will turn 

to Green when full charged.

b) We recommend a full charge cycle of 12 hours if 

the battery power is drained completely. A fully 

charged 2 Face / Face Evolution should last for 

approximately 30 minutes.

c) We recommend charge the device every three 

months if you do not use your 2 Face / Face Evolution 

Device.

4.2 Usage Instructions For EMS Facial Toning

Indications For Use

1) PERSONAL PREPARATION Start by cleaning your 

face with an oil-free cleanser. Men should shave 

before treatment, as hair can interfere with the 

conductivity of the treat parts.

Note: 

a) The facial area under a beard or mustache cannot 

be treated. When you use the 2 Face / Face Evolution 

Device, make sure you are positioned in front of a 

mirror in a well-lit room.

b) Any make-up and/or oil-based products left on the 

skin can block the penetration of microcurrent.

Treatment

1) Ensure that you have no allergic reaction to the 2 

Face / Face Evolution gel primer before proceeding.

2) Apply the 2 Face / Face Evolution gel primer section 

by section as you treat to prevent it from drying.

Note: 

a) To ensure microcurrent penetration, use enough 

primer to create a mask-like layer (do not rub in).

3) Turn unit ON by pressing the EMS button on the 

front of your device. An audible beep will indicate the 

unit is on.

4) Adjust the intensity level to your comfort by 

progressively pressing the EMS button to increase or 

decrease the microcurrent output. As you toggle 

between the 4 intensity levels, an audible beep is 

emitted and the number of illuminated blue lights will 

change. At the 0 level no light will be illuminated, and 

there are no microcurrent output. At 1 level, all one 

blue lights will be illuminated. At the 2 level two blue 

light will be illuminated. At the 3 level three blue light 

will be illuminated.

5) The 2 Face / Face Evolution Device will not 

contract the muscles and when used correctly, the 

current is soft, very soothing and mild.

6) Remember to turn off the 2 Face / Face Evolution 

Device after every treatment. The device will emit a 

beep when device is turning off.

7) The 2 Face  / Face Evolution Device will 

automatically turn off after approximately 5 minutes of 

use.

Note:

a) Treatment Frequency:

• Use for 5 minutes per day

• Use at least 5 days per week

• Allow 24 hours between treatment sessions

Skin Health Tip: Exfoliate 1-2 times a week for 

enhanced  results.

4.3 Usage Instructions For PHOTON

Indications For Use

There are 25 Photon lights in 4 different colors modes 

with SUS304 treatment probe. SUS304 treatment 

probe is intended to be placed directly on the skin to 

get a nice feeling and provide topical heating with the 

temperature 41 ℃±2℃ 

1)  Red RGB Light (620 - 730 nm Wavelength)

Red light is proven to stimulate the production of 

collagen. Collagen is essential for repairing damaged 

skin tissue and improving skin texture. This leads to 

reduction of fine lines, wrinkles, scars, large pores 

and hyperpigmentation. You will enjoy young, healthy 

and vibrant complexion with continued use.

2)  Green RGB Light (525 - 550 nm Wavelength)

Green light reduces hyperpigmentation, discoloration, 

freckles, sun damage, and age spots. It lightens and 

reduces existing pigmentation, improves overall skin 

tone, and protects skin from premature discolorations 

without the use of harmful skin lightening

3)  Blue RGB Light (430 - 450 nm Wavelength)

Blue light reduces inflammation and drastically boosts 

skin recovery while decreasing skin oiliness by 

lowering excess sebum production.

4)  White RGB Light (All the Red, Blue and Green 

lights work together)

Compound the benefits of red light, blue light and 

green light. Comprehensively balance and care your 

skin, reveal you perfect skin condition. 

Treatment

1) Turn the unit ON by pressing the PHOTON button. 

The first light is Green Light, to show the Photon 

function is turned on. It has low power testing 

function, when the power is lower than 3.0Volts, the 

green indicate light will be twinkling.

2) The Second light is RGB Light, which shows the 

Photon therapy mode is working. Adjust the Light 

mode to your aimed function by pressing the 

PHOTON button repeatedly. Place the treatment 

surface (massage head) on your skin, the RGB Light 

Indicator will automatically activate.

Apply light pressure while slowing moving the device 

in small circular motions, the treatment surface 

temperature will slowly increase.

   Press one time, the Red light works and the RGB 

Light Indicator turns Red;

   Press second time, the Green light works and the 

RGB Light Indicator turns Green;

   Press third time, the Blue light works and the RGB 

Light Indicator turns Blue;

   Press forth time, the White light works and the RGB 

Light Indicator turns white, that means all the Red, 

Green and Blue lights work simultaneously.

 

Note: 

a) Only when the massage head touches the skin can 

the device work. There is 1 minutes for the device to 

detect the human body induction. The device will turn 

off automatically if no human body were detected in 1 

minutes.

b) The White light works and the Function indicator 

turns white, that means all the Red, Green and Blue 

lights work simultaneously.

3) Perform the treatment for 5~7 minutes on each 

area.

4) It is recommended to apply a small amount of 

Moisturizing cream on the treated skin areas after 

each session and to massage it gently in circular 

motions.

 

5 Maintenance

After each session, it is recommended to clean the 

device.

1) Turn the device OFF by pressing the EMS and 

PHOTON button.

2) Unplug the device from the electrical outlet.

3) This device is designed for household use and is 

virtually maintenance free. To clean the head and 

body of this device, use a cloth only. Do not use 

strong chemical cleaners.

4) If the cord or device is damaged or does not 

operate properly, contact the distributor.

Never allow the power supply cord to be excessively 

pul RGB or twisted. Inspect the cord frequently for 

damage. Stop use immediately if damage is visible, or 

if device stops or operates intermittently. Do no wrap 

the cord around the appliance.

5.1Cleaning

1) Make sure device is off and unplugged from the 

A/C outlet.

2) Clean the outside of the unit with a damp cloth or 

paper towel. Be careful not to allow any moisture to 

penetrate the seams of the unit. Allow sufficient time 

to dry by standing the unit in a vertical position 

against a corner.

Note:

-DO NOT immerse the device unit in water or a 

dishwasher.

-DO NOT open or dismantle the housing of the unit, 

as there are no user serviceable parts inside.

-DO NOT drop or apply pressure to the outside of the 

unit since this may damage   or weaken the bulb and 

other components.

-DO NOT use alcohol, benzine or other types of 

solvents to clean the unit, as such substances will 

weaken and/or permanently damage the components 

and materials used in the manufacturing of the unit. If 

necessary, use only mild dish washing soap with a 

damp cloth.

11

12

 


background image

4 Using Instructions

4.1 First Use And Preparation

1) Remove your 2 Face / Face Evolution Device, DC 

Charging Adaptor from the box.

2) Insert the DC plug of adaptor into DC hold of the 

device.

3) Connect the Power plug into an electrical outlet 

(AC100-240V 50Hz/60Hz 0.2A). When charging, the 

Red-Green double color light turns red and it will turn 

to Green when full charged.

Note: 

a) Charge your 2 Face / Face Evolution Device for 12 

hours before the first use. When charging, the 

Red-Green double color light turns red and it will turn 

to Green when full charged.

b) We recommend a full charge cycle of 12 hours if 

the battery power is drained completely. A fully 

charged 2 Face / Face Evolution should last for 

approximately 30 minutes.

c) We recommend charge the device every three 

months if you do not use your 2 Face / Face Evolution 

Device.

4.2 Usage Instructions For EMS Facial Toning

Indications For Use

1) PERSONAL PREPARATION Start by cleaning your 

face with an oil-free cleanser. Men should shave 

before treatment, as hair can interfere with the 

conductivity of the treat parts.

Note: 

a) The facial area under a beard or mustache cannot 

be treated. When you use the 2 Face / Face Evolution 

Device, make sure you are positioned in front of a 

mirror in a well-lit room.

b) Any make-up and/or oil-based products left on the 

skin can block the penetration of microcurrent.

Treatment

1) Ensure that you have no allergic reaction to the 2 

Face / Face Evolution gel primer before proceeding.

2) Apply the 2 Face / Face Evolution gel primer section 

by section as you treat to prevent it from drying.

Note: 

a) To ensure microcurrent penetration, use enough 

primer to create a mask-like layer (do not rub in).

3) Turn unit ON by pressing the EMS button on the 

front of your device. An audible beep will indicate the 

unit is on.

4) Adjust the intensity level to your comfort by 

progressively pressing the EMS button to increase or 

decrease the microcurrent output. As you toggle 

between the 4 intensity levels, an audible beep is 

emitted and the number of illuminated blue lights will 

change. At the 0 level no light will be illuminated, and 

there are no microcurrent output. At 1 level, all one 

blue lights will be illuminated. At the 2 level two blue 

light will be illuminated. At the 3 level three blue light 

will be illuminated.

5) The 2 Face / Face Evolution Device will not 

contract the muscles and when used correctly, the 

current is soft, very soothing and mild.

6) Remember to turn off the 2 Face / Face Evolution 

Device after every treatment. The device will emit a 

beep when device is turning off.

7) The 2 Face  / Face Evolution Device will 

automatically turn off after approximately 5 minutes of 

use.

Note:

a) Treatment Frequency:

• Use for 5 minutes per day

• Use at least 5 days per week

• Allow 24 hours between treatment sessions

Skin Health Tip: Exfoliate 1-2 times a week for 

enhanced  results.

4.3 Usage Instructions For PHOTON

Indications For Use

There are 25 Photon lights in 4 different colors modes 

with SUS304 treatment probe. SUS304 treatment 

probe is intended to be placed directly on the skin to 

get a nice feeling and provide topical heating with the 

temperature 41 ℃±2℃ 

1)  Red RGB Light (620 - 730 nm Wavelength)

Red light is proven to stimulate the production of 

collagen. Collagen is essential for repairing damaged 

skin tissue and improving skin texture. This leads to 

reduction of fine lines, wrinkles, scars, large pores 

and hyperpigmentation. You will enjoy young, healthy 

and vibrant complexion with continued use.

2)  Green RGB Light (525 - 550 nm Wavelength)

Green light reduces hyperpigmentation, discoloration, 

freckles, sun damage, and age spots. It lightens and 

reduces existing pigmentation, improves overall skin 

tone, and protects skin from premature discolorations 

without the use of harmful skin lightening

3)  Blue RGB Light (430 - 450 nm Wavelength)

Blue light reduces inflammation and drastically boosts 

skin recovery while decreasing skin oiliness by 

lowering excess sebum production.

4)  White RGB Light (All the Red, Blue and Green 

lights work together)

Compound the benefits of red light, blue light and 

green light. Comprehensively balance and care your 

skin, reveal you perfect skin condition. 

Treatment

1) Turn the unit ON by pressing the PHOTON button. 

The first light is Green Light, to show the Photon 

function is turned on. It has low power testing 

function, when the power is lower than 3.0Volts, the 

green indicate light will be twinkling.

2) The Second light is RGB Light, which shows the 

Photon therapy mode is working. Adjust the Light 

mode to your aimed function by pressing the 

PHOTON button repeatedly. Place the treatment 

surface (massage head) on your skin, the RGB Light 

Indicator will automatically activate.

Apply light pressure while slowing moving the device 

in small circular motions, the treatment surface 

temperature will slowly increase.

   Press one time, the Red light works and the RGB 

Light Indicator turns Red;

   Press second time, the Green light works and the 

RGB Light Indicator turns Green;

   Press third time, the Blue light works and the RGB 

Light Indicator turns Blue;

   Press forth time, the White light works and the RGB 

Light Indicator turns white, that means all the Red, 

Green and Blue lights work simultaneously.

 

Note: 

a) Only when the massage head touches the skin can 

the device work. There is 1 minutes for the device to 

detect the human body induction. The device will turn 

off automatically if no human body were detected in 1 

minutes.

b) The White light works and the Function indicator 

turns white, that means all the Red, Green and Blue 

lights work simultaneously.

3) Perform the treatment for 5~7 minutes on each 

area.

4) It is recommended to apply a small amount of 

Moisturizing cream on the treated skin areas after 

each session and to massage it gently in circular 

motions.

 

5 Maintenance

After each session, it is recommended to clean the 

device.

1) Turn the device OFF by pressing the EMS and 

PHOTON button.

2) Unplug the device from the electrical outlet.

3) This device is designed for household use and is 

virtually maintenance free. To clean the head and 

body of this device, use a cloth only. Do not use 

strong chemical cleaners.

4) If the cord or device is damaged or does not 

operate properly, contact the distributor.

Never allow the power supply cord to be excessively 

pul RGB or twisted. Inspect the cord frequently for 

damage. Stop use immediately if damage is visible, or 

if device stops or operates intermittently. Do no wrap 

the cord around the appliance.

5.1Cleaning

1) Make sure device is off and unplugged from the 

A/C outlet.

2) Clean the outside of the unit with a damp cloth or 

paper towel. Be careful not to allow any moisture to 

penetrate the seams of the unit. Allow sufficient time 

to dry by standing the unit in a vertical position 

against a corner.

Note:

-DO NOT immerse the device unit in water or a 

dishwasher.

-DO NOT open or dismantle the housing of the unit, 

as there are no user serviceable parts inside.

-DO NOT drop or apply pressure to the outside of the 

unit since this may damage   or weaken the bulb and 

other components.

-DO NOT use alcohol, benzine or other types of 

solvents to clean the unit, as such substances will 

weaken and/or permanently damage the components 

and materials used in the manufacturing of the unit. If 

necessary, use only mild dish washing soap with a 

damp cloth.

13

14

 


background image

4 Using Instructions

4.1 First Use And Preparation

1) Remove your 2 Face / Face Evolution Device, DC 

Charging Adaptor from the box.

2) Insert the DC plug of adaptor into DC hold of the 

device.

3) Connect the Power plug into an electrical outlet 

(AC100-240V 50Hz/60Hz 0.2A). When charging, the 

Red-Green double color light turns red and it will turn 

to Green when full charged.

Note: 

a) Charge your 2 Face / Face Evolution Device for 12 

hours before the first use. When charging, the 

Red-Green double color light turns red and it will turn 

to Green when full charged.

b) We recommend a full charge cycle of 12 hours if 

the battery power is drained completely. A fully 

charged 2 Face / Face Evolution should last for 

approximately 30 minutes.

c) We recommend charge the device every three 

months if you do not use your 2 Face / Face Evolution 

Device.

4.2 Usage Instructions For EMS Facial Toning

Indications For Use

1) PERSONAL PREPARATION Start by cleaning your 

face with an oil-free cleanser. Men should shave 

before treatment, as hair can interfere with the 

conductivity of the treat parts.

Note: 

a) The facial area under a beard or mustache cannot 

be treated. When you use the 2 Face / Face Evolution 

Device, make sure you are positioned in front of a 

mirror in a well-lit room.

b) Any make-up and/or oil-based products left on the 

skin can block the penetration of microcurrent.

Treatment

1) Ensure that you have no allergic reaction to the 2 

Face / Face Evolution gel primer before proceeding.

2) Apply the 2 Face / Face Evolution gel primer section 

by section as you treat to prevent it from drying.

Note: 

a) To ensure microcurrent penetration, use enough 

primer to create a mask-like layer (do not rub in).

3) Turn unit ON by pressing the EMS button on the 

front of your device. An audible beep will indicate the 

unit is on.

4) Adjust the intensity level to your comfort by 

progressively pressing the EMS button to increase or 

decrease the microcurrent output. As you toggle 

between the 4 intensity levels, an audible beep is 

emitted and the number of illuminated blue lights will 

change. At the 0 level no light will be illuminated, and 

there are no microcurrent output. At 1 level, all one 

blue lights will be illuminated. At the 2 level two blue 

light will be illuminated. At the 3 level three blue light 

will be illuminated.

5) The 2 Face / Face Evolution Device will not 

contract the muscles and when used correctly, the 

current is soft, very soothing and mild.

6) Remember to turn off the 2 Face / Face Evolution 

Device after every treatment. The device will emit a 

beep when device is turning off.

7) The 2 Face  / Face Evolution Device will 

automatically turn off after approximately 5 minutes of 

use.

Note:

a) Treatment Frequency:

• Use for 5 minutes per day

• Use at least 5 days per week

• Allow 24 hours between treatment sessions

Skin Health Tip: Exfoliate 1-2 times a week for 

enhanced  results.

4.3 Usage Instructions For PHOTON

Indications For Use

There are 25 Photon lights in 4 different colors modes 

with SUS304 treatment probe. SUS304 treatment 

probe is intended to be placed directly on the skin to 

get a nice feeling and provide topical heating with the 

temperature 41 ℃±2℃ 

1)  Red RGB Light (620 - 730 nm Wavelength)

Red light is proven to stimulate the production of 

collagen. Collagen is essential for repairing damaged 

skin tissue and improving skin texture. This leads to 

reduction of fine lines, wrinkles, scars, large pores 

and hyperpigmentation. You will enjoy young, healthy 

and vibrant complexion with continued use.

2)  Green RGB Light (525 - 550 nm Wavelength)

Green light reduces hyperpigmentation, discoloration, 

freckles, sun damage, and age spots. It lightens and 

reduces existing pigmentation, improves overall skin 

tone, and protects skin from premature discolorations 

without the use of harmful skin lightening

3)  Blue RGB Light (430 - 450 nm Wavelength)

Blue light reduces inflammation and drastically boosts 

skin recovery while decreasing skin oiliness by 

lowering excess sebum production.

4)  White RGB Light (All the Red, Blue and Green 

lights work together)

Compound the benefits of red light, blue light and 

green light. Comprehensively balance and care your 

skin, reveal you perfect skin condition. 

Treatment

1) Turn the unit ON by pressing the PHOTON button. 

The first light is Green Light, to show the Photon 

function is turned on. It has low power testing 

function, when the power is lower than 3.0Volts, the 

green indicate light will be twinkling.

2) The Second light is RGB Light, which shows the 

Photon therapy mode is working. Adjust the Light 

mode to your aimed function by pressing the 

PHOTON button repeatedly. Place the treatment 

surface (massage head) on your skin, the RGB Light 

Indicator will automatically activate.

Apply light pressure while slowing moving the device 

in small circular motions, the treatment surface 

temperature will slowly increase.

   Press one time, the Red light works and the RGB 

Light Indicator turns Red;

   Press second time, the Green light works and the 

RGB Light Indicator turns Green;

   Press third time, the Blue light works and the RGB 

Light Indicator turns Blue;

   Press forth time, the White light works and the RGB 

Light Indicator turns white, that means all the Red, 

Green and Blue lights work simultaneously.

 

Note: 

a) Only when the massage head touches the skin can 

the device work. There is 1 minutes for the device to 

detect the human body induction. The device will turn 

off automatically if no human body were detected in 1 

minutes.

b) The White light works and the Function indicator 

turns white, that means all the Red, Green and Blue 

lights work simultaneously.

3) Perform the treatment for 5~7 minutes on each 

area.

4) It is recommended to apply a small amount of 

Moisturizing cream on the treated skin areas after 

each session and to massage it gently in circular 

motions.

 

5 Maintenance

After each session, it is recommended to clean the 

device.

1) Turn the device OFF by pressing the EMS and 

PHOTON button.

2) Unplug the device from the electrical outlet.

3) This device is designed for household use and is 

virtually maintenance free. To clean the head and 

body of this device, use a cloth only. Do not use 

strong chemical cleaners.

4) If the cord or device is damaged or does not 

operate properly, contact the distributor.

Never allow the power supply cord to be excessively 

pul RGB or twisted. Inspect the cord frequently for 

damage. Stop use immediately if damage is visible, or 

if device stops or operates intermittently. Do no wrap 

the cord around the appliance.

5.1Cleaning

1) Make sure device is off and unplugged from the 

A/C outlet.

2) Clean the outside of the unit with a damp cloth or 

paper towel. Be careful not to allow any moisture to 

penetrate the seams of the unit. Allow sufficient time 

to dry by standing the unit in a vertical position 

against a corner.

Note:

-DO NOT immerse the device unit in water or a 

dishwasher.

-DO NOT open or dismantle the housing of the unit, 

as there are no user serviceable parts inside.

-DO NOT drop or apply pressure to the outside of the 

unit since this may damage   or weaken the bulb and 

other components.

-DO NOT use alcohol, benzine or other types of 

solvents to clean the unit, as such substances will 

weaken and/or permanently damage the components 

and materials used in the manufacturing of the unit. If 

necessary, use only mild dish washing soap with a 

damp cloth.

15

16

 


background image

4 Using Instructions

4.1 First Use And Preparation

1) Remove your 2 Face / Face Evolution Device, DC 

Charging Adaptor from the box.

2) Insert the DC plug of adaptor into DC hold of the 

device.

3) Connect the Power plug into an electrical outlet 

(AC100-240V 50Hz/60Hz 0.2A). When charging, the 

Red-Green double color light turns red and it will turn 

to Green when full charged.

Note: 

a) Charge your 2 Face / Face Evolution Device for 12 

hours before the first use. When charging, the 

Red-Green double color light turns red and it will turn 

to Green when full charged.

b) We recommend a full charge cycle of 12 hours if 

the battery power is drained completely. A fully 

charged 2 Face / Face Evolution should last for 

approximately 30 minutes.

c) We recommend charge the device every three 

months if you do not use your 2 Face / Face Evolution 

Device.

4.2 Usage Instructions For EMS Facial Toning

Indications For Use

1) PERSONAL PREPARATION Start by cleaning your 

face with an oil-free cleanser. Men should shave 

before treatment, as hair can interfere with the 

conductivity of the treat parts.

Note: 

a) The facial area under a beard or mustache cannot 

be treated. When you use the 2 Face / Face Evolution 

Device, make sure you are positioned in front of a 

mirror in a well-lit room.

b) Any make-up and/or oil-based products left on the 

skin can block the penetration of microcurrent.

Treatment

1) Ensure that you have no allergic reaction to the 2 

Face / Face Evolution gel primer before proceeding.

2) Apply the 2 Face / Face Evolution gel primer section 

by section as you treat to prevent it from drying.

Note: 

a) To ensure microcurrent penetration, use enough 

primer to create a mask-like layer (do not rub in).

3) Turn unit ON by pressing the EMS button on the 

front of your device. An audible beep will indicate the 

unit is on.

4) Adjust the intensity level to your comfort by 

progressively pressing the EMS button to increase or 

decrease the microcurrent output. As you toggle 

between the 4 intensity levels, an audible beep is 

emitted and the number of illuminated blue lights will 

change. At the 0 level no light will be illuminated, and 

there are no microcurrent output. At 1 level, all one 

blue lights will be illuminated. At the 2 level two blue 

light will be illuminated. At the 3 level three blue light 

will be illuminated.

5) The 2 Face / Face Evolution Device will not 

contract the muscles and when used correctly, the 

current is soft, very soothing and mild.

6) Remember to turn off the 2 Face / Face Evolution 

Device after every treatment. The device will emit a 

beep when device is turning off.

7) The 2 Face  / Face Evolution Device will 

automatically turn off after approximately 5 minutes of 

use.

Note:

a) Treatment Frequency:

• Use for 5 minutes per day

• Use at least 5 days per week

• Allow 24 hours between treatment sessions

Skin Health Tip: Exfoliate 1-2 times a week for 

enhanced  results.

4.3 Usage Instructions For PHOTON

Indications For Use

There are 25 Photon lights in 4 different colors modes 

with SUS304 treatment probe. SUS304 treatment 

probe is intended to be placed directly on the skin to 

get a nice feeling and provide topical heating with the 

temperature 41 ℃±2℃ 

1)  Red RGB Light (620 - 730 nm Wavelength)

Red light is proven to stimulate the production of 

collagen. Collagen is essential for repairing damaged 

skin tissue and improving skin texture. This leads to 

reduction of fine lines, wrinkles, scars, large pores 

and hyperpigmentation. You will enjoy young, healthy 

and vibrant complexion with continued use.

2)  Green RGB Light (525 - 550 nm Wavelength)

Green light reduces hyperpigmentation, discoloration, 

freckles, sun damage, and age spots. It lightens and 

reduces existing pigmentation, improves overall skin 

tone, and protects skin from premature discolorations 

without the use of harmful skin lightening

3)  Blue RGB Light (430 - 450 nm Wavelength)

Blue light reduces inflammation and drastically boosts 

skin recovery while decreasing skin oiliness by 

lowering excess sebum production.

4)  White RGB Light (All the Red, Blue and Green 

lights work together)

Compound the benefits of red light, blue light and 

green light. Comprehensively balance and care your 

skin, reveal you perfect skin condition. 

Treatment

1) Turn the unit ON by pressing the PHOTON button. 

The first light is Green Light, to show the Photon 

function is turned on. It has low power testing 

function, when the power is lower than 3.0Volts, the 

green indicate light will be twinkling.

2) The Second light is RGB Light, which shows the 

Photon therapy mode is working. Adjust the Light 

mode to your aimed function by pressing the 

PHOTON button repeatedly. Place the treatment 

surface (massage head) on your skin, the RGB Light 

Indicator will automatically activate.

Apply light pressure while slowing moving the device 

in small circular motions, the treatment surface 

temperature will slowly increase.

   Press one time, the Red light works and the RGB 

Light Indicator turns Red;

   Press second time, the Green light works and the 

RGB Light Indicator turns Green;

   Press third time, the Blue light works and the RGB 

Light Indicator turns Blue;

   Press forth time, the White light works and the RGB 

Light Indicator turns white, that means all the Red, 

Green and Blue lights work simultaneously.

 

Note: 

a) Only when the massage head touches the skin can 

the device work. There is 1 minutes for the device to 

detect the human body induction. The device will turn 

off automatically if no human body were detected in 1 

minutes.

b) The White light works and the Function indicator 

turns white, that means all the Red, Green and Blue 

lights work simultaneously.

3) Perform the treatment for 5~7 minutes on each 

area.

4) It is recommended to apply a small amount of 

Moisturizing cream on the treated skin areas after 

each session and to massage it gently in circular 

motions.

 

5 Maintenance

After each session, it is recommended to clean the 

device.

1) Turn the device OFF by pressing the EMS and 

PHOTON button.

2) Unplug the device from the electrical outlet.

3) This device is designed for household use and is 

virtually maintenance free. To clean the head and 

body of this device, use a cloth only. Do not use 

strong chemical cleaners.

4) If the cord or device is damaged or does not 

operate properly, contact the distributor.

Never allow the power supply cord to be excessively 

pul RGB or twisted. Inspect the cord frequently for 

damage. Stop use immediately if damage is visible, or 

if device stops or operates intermittently. Do no wrap 

the cord around the appliance.

5.1Cleaning

1) Make sure device is off and unplugged from the 

A/C outlet.

2) Clean the outside of the unit with a damp cloth or 

paper towel. Be careful not to allow any moisture to 

penetrate the seams of the unit. Allow sufficient time 

to dry by standing the unit in a vertical position 

against a corner.

Note:

-DO NOT immerse the device unit in water or a 

dishwasher.

-DO NOT open or dismantle the housing of the unit, 

as there are no user serviceable parts inside.

-DO NOT drop or apply pressure to the outside of the 

unit since this may damage   or weaken the bulb and 

other components.

-DO NOT use alcohol, benzine or other types of 

solvents to clean the unit, as such substances will 

weaken and/or permanently damage the components 

and materials used in the manufacturing of the unit. If 

necessary, use only mild dish washing soap with a 

damp cloth.

5.2 Trouble Shooting

In the event that the device fails to perform as 

intended, the following notes will help to identify 

potential problems with the device and its setup.

5.3 Disposal of Electrical and Electronic 

Equipment Waste (E-waste)

Disposal information for e-waste depends on the city 

you are in, as all regulations are local, to learn about 

recycling or disposal programs in your area search 

“E-waste recycling or disposal” online.

You can also contact your city directly or look into your 

local electronics store policy.

6 Service

The 2 Face / Face Evolution (Model: 2 Face / Face 

Evolution) has no parts you can fix. Do not try to repair 

it. If the 2 Face / Face Evolution requires service, 

please contact Heat In A Click LLC. All returned units 

Problem                                Solution

Device turns off 

automatically

Maybe reach the set time 

or low power

Device cannot not 

turn on

Check and recharge 

batteries. Make sure contact 

points on device and 

charging stand are in contact 

and the device is properly 

seated within the charging 

stand.

Device shuts off in 

mid-treatment or only 

after few treatments

Check and recharge 

batteries.

17

18

 


background image

to the manufacturer for repair, including Warranty 

repair and Out-Of-Warranty repair, must include the 

following:

During Warranty Period with proof of Purchase (store 

receipt)

RMA Number: Should your product become defective 

during the warranty period,                                  

Call Heat In A Click’s customer service team at 

1(954)518-9777 to request an RMA number.

Package the item securely and return it 

prepaid/insured – along with proof of purchase to:

                            Heat In A Click LLC

                    Warranty Repair Department

         1975 tigertail blvd Dania Florida 33034 USA

To insure prompt repair, provide complete, legible 

name, address and phone number information, RMA 

number and a note indicating the nature of the product 

defect and a copy of the original invoice issued for 

purchase of the unit. We will Repair or Replace (at our 

sole discretion) product at no charge. Ship unit to the 

manufacturer in the original container with all 

accessories and information as required above.

6.1 Outside Warranty Period

Any damage caused by non-original packaging may 

render the warranty null and void. Any services to 

these units shall be performed only by a Service 

Technician certified by Heat In A Click LLC.

7 Safety, EMC & Biocompatibility

1) This device is Class II equipment with type BF 

applied part. The light treatment attachment and 

electrical muscle stimulation treatment attachment 

were considered as one type BF applied part. It 

complies with Medical Electrical Safety Standards (IEC 

60601-1, IEC 60601-2-10).

2) This device is also complied to Medical EMC 

Standard (IEC 60601-1-2).

3) All the user directly contracting materials for main 

device housing and output contacts in this device are 

biocompatible for its intended use. They are complied 

with biocompatibility standards ISO 10993-5 

(Cytotoxicity) and ISO 10993-10 (Irritation and 

Sensitization).

Guidance and manufacturer’s declaration – 

electromagnetic emissions
The 2 Face / Face Evolution (Model: 2 Face / Face 

Evolution) is intended for use in the electromagnetic 

environment specified below. The customer or the user of 

the 2 Face / Face Evolution (Model: 2 Face / Face 

Evolution) should assure that it is used in such an 

environment.

Emissions    Compliance    Electromagnetic 

                                              environment-- guidance
RF 

emissions

CISPR 11

Group 1

The 2 Face / Face Evolution 

(Model: 2 Face / Face 

Evolution) uses RF energy only 

for its internal function. 

Therefore, its RF emissions are 

very low and are not likely to 

cause any interference in 

nearby electronic equipment.

19

20

 


background image

RF 

emissions

CISPR 11

Class B

Class A

Harmonic

emissions

IEC 

61000-3-2
Voltage

fluctuations/

flicker 

emissions

IEC 

61000-3-3

Not 

Applicable

The 2 Face / Face 

Evolution(Model: 2 Face / Face 

Evolution) is suitable for use in 

all establishments, including 

domestic establishments and 

those directly connected to the 

public low-voltage power 

supply network that supplies 

buildings used for domestic 

purposes.

Guidance and manufacturer’s declaration – 

electromagnetic immunity

The 2 Face / Face Evolution (Model: 2 Face / Face 

Evolution) is intended for use in the electromagnetic 

environment specified below. The customer or the user of 

the 2 Face / Face Evolution (Model: 2 Face / Face 

Evolution) should assure that it is used in such an 

environment.

Immunity 

test

IEC 60601

test level

Compliance 

level

Electromagnetic 

environment

--guidance

Electrostatic

discharge 

(ESD) IEC 

61000-4-2

±6 kV 

contact

±8 kV air

±6 kV 

contact

±8 kV air

Floors should be 

wood, concrete or 

ceramic tile. If floors 

are covered with 

synthetic material, 

the relative humidity 

should be at least 

30 %.

Electrical 

fast transient

/burst IEC 

61000-4-4

±2 kV for 

powersupply 

lines

±1 kV for

input/output 

lines

Not 

Applicable

Not 

Applicable

Not 

Applicable

Mains power quality 

should be that of a 

typical commercial 

or hospital 

environment

Surge

IEC 

61000-4-5

± 1 kV 

line(s) and

neutral

Mains power quality 

should be that of a 

typical commercial 

or hospital 

environment.

Voltage dips,

short

interruptions 

andvoltage

variations

on power 

supply input 

lines IEC 

61000-4-11

<5 % UT

(>95 % dip 

in UT)for 0,5 

cycle

40 % UT(60 

% dip in UT)

for 5 cycles

70 % UT(30 

% dip in UT)

for 25 cycles

<5 % UT

(>95 % dip 

in UT)for 5s

Mains power quality 

should be that of a 

typical commercial 

or hospital 

environment. If the 

user of the 2 Face / 

Face Evolution 

(Model: 2 Face / 

Face Evolution) 

requires continued 

operation during 

power mains 

interruptions, it is 

recommended that 

the 2 Face / Face 

Evolution (Model: 2 

Face / Face 

Evolution) be 

powered from an 

uninterruptible 

power supply or a 

battery.

21

22

 


background image

Power 

frequency

(50/60 Hz)

magnetic 

fieldIEC 

61000-4-8

3 A/m

3 A/m

Power frequency 

magnetic fields 

should be at levels 

characteristic of a 

typical location in a 

typical commercial or 

hospital environment.

NOTE U

T

 is the a.c. mains voltage prior to application of 

the test level

Guidance and manufacturer’s declaration – 

electromagnetic immunity

The 2 Face / Face Evolution (Model: 2 Face / Face 

Evolution) is intended for use in the electromagnetic 

environment specified below. The customer or the user of 

the 2 Face / Face Evolution (Model: 2 Face / Face 

Evolution) should assure that it is used in such an 

environment.

Immunity 

test

IEC 60601

test level

Compliance

level

Electromagnetic 

environment – guidance

Conducted

RF

IEC

61000-4-6

Radiated 

RF

IEC

61000-4-3

3 Vrms

150 kHz to 

80MHz

3 V/m

80 MHz to 

2.5GHz

Not 

Applicable

3 V/m

Portable and mobile RF 

communications 

equipment should be 

used no closer to any 

part of the 2 Face / 

Face Evolution  (Model: 

2 Face / Face 

Evolution), including 

cables, than the 

recommended 

separation distance 

calculated from the 

equation applicable to 

the frequency of the 

transmitter. 

Recommended 

separation distance

Where P is the 

maximum output power 

rating of the transmitter 

in watts (W) according 

to the transmitter 

manufacturer and d is 

the recommended 

separation Distance in 

meters (m). 

Field strengths from 

fixed RF transmitters, 

as determined by an 

electromagnetic site 

survey, 

a. should be less than 

the compliance level in 

each frequency range. 

b. Interference may 

occur in the vicinity of 

Equipment marked with 

the following symbol:

NOTE 1 At 80 MHz and 800 MHz, the higher frequency 

range applies.

NOTE 2 These guidelines may not apply in all situations. 

Electromagnetic propagation is affected by absorption and 

reflection from structures, objects and people.

23

24

 


background image

a. Field strengths from fixed transmitters, such as base 

stations for radio (cellular/cordless) telephones and land 

mobile radios, amateur radio, AM and FM radio broadcast 

and TV broadcast cannot be predicted theoretically with 

accuracy. To assess the electromagnetic environment due 

to fixed RF transmitters, an electromagnetic site survey 

should be considered. If the measured field strength in the 

location in which the 2 Face / Face Evolution (Model: 2 

Face / Face Evolution) is used exceeds the applicable RF 

compliance level above, the 2 Face / Face Evolution 

(Model: 2 Face / Face Evolution) should be observed to 

verify normal operation. If abnormal performance is 

observed, additional measures may be necessary, such as 

re-orienting or relocating the 2 Face / Face Evolution 

(Model: 2 Face / Face Evolution).

b. Over the frequency range 150 kHz to 80 MHz, field 

strengths should be less than 3 V/m.

Recommended separation distances between portable 

and mobile RF communications equipment and the 

Model 2 Face

The 2 Face / Face Evolution (Model: 2 Face / Face 

Evolution) is intended for use in an electromagnetic 

environment in which radiated RF disturbances are control 

RGB. The customer or the user of the 2 Face / Face 

Evolution (Model: 2 Face / Face Evolution) can help prevent 

electromagnetic interference by maintaining a minimum 

distance between portable and mobile RF communications 

equipment (transmitters) and the 2 Face / Face Evolution 

(Model: 2 Face / Face Evolution) as recommended below, 

according to the maximum output power of the 

communications equipment.

Rated maximum 

output power of 

transmitter (W)

Separation distance according to frequency of 

transmitter (m)

150 kHz to 

80 MHz

80 MHz to 

800 MHz

800 MHz to 

2.5 GHz

0.01 

      0.12               0.12 

  0.23

0.1 

      0.38               0.38 

  0.73

      1.2 

             1.2                      2.3

10 

      3.8 

              3.8 

   7.3

100 

      12 

              12                      23

For transmitters rated at a maximum output power not listed 
above, the recommended separation distance d in meters 
(m) can be estimated using the equation applicable to the 
frequency of the transmitter, where P is the maximum 
output power rating of the transmitter in watts (W) according 
to the transmitter manufacturer.
NOTE1 At 80 MHz and 800 MHz, the separation distance 
for the higher frequency range applies.
NOTE2 These guidelines may not apply in all situations. 
Electromagnetic propagation is affected by absorption and 
reflection from structures, objects and people.

8 Product Information

8.1 Specification

Basic Unit Specification
Power Supply 

        DC, 3.7V, 2200mAh

DC Charging Adaptor          AC100-240V 50Hz/60Hz 0.2A

Method of Line current 
Isolation

Type BF Applied Part(The light 
treatment attachment and 
electrical muscle stimulation 
treatment attachment were 
considered as one type BF 
applied part)

25

26

 


background image

Main Unit Weight 

        200g

Dimensions of device         158mm*56mm*51.5mm
Housing Materials of main

unit 

ABS Plastic & Stainless Steel

Indicator

EMS Mode intensity Indicator 

lights, Photon Mode working 

indicator lights, Photon Mode 

Indicator lights, Charging 

Indicator

Operation Environment

Temperature: 5 ~ 40°C

Relative Humidity: ≤70% RH 

(But not requiring a water vapour 

Partial pressure greater than 50 

hPa)

Barometric Pressure: 86~106 

kPa

Temperature: -10 ~55°C

Relative Humidity: ≤80% RH 

(But not requiring a water 

vapour Partial pressure greater 

than 50 hPa)

Barometric Pressure: 50~106 

kPa

Storage & Transportation 

Environment

EMS Mode Specification

Number of Output 

channels 
Output Intensity Level         3

1

Waveform and Shape

Pulsed Biphasic, Modulated 

Square

Basic Pulse Duration         60ms
Pulse Frequency 

       8.33Hz

Maximum Output Voltage 

(+/- 10%)

0.252V @ 500Ω   

1.02V @ 2k

Maximum Output Current

(+/- 10%)

0.502mA @ 500Ω    

0.510mA @ 2kΩ

Net Charge (per pulse)        42.96μC @500Ω
Maximum Phase Charge     33.264μC @ 500Ω
Maximum Current 

Density

0.095mA/cm2@500Ω (The 

Minimum Electrode Size: 

2.91cm²)

Maximum Power Density 264.05μW/cm2@500Ω (The 

Minimum Electrode Size: 

2.91cm²)

Time Range 

       5 minutes

Photon Mode Specification

Wavelengths

Red RGB Light ( 620 - 730 nm 

Wavelength ),

Green RGB Light ( 525 - 550 nm 

Wavelength ),

Blue RGB Light ( 430 - 450 nm 

Wavelength ),

White RGB Light (All the Red, 

Blue and Green lights work 

together).

Heat Temperature Range    41℃±2℃

Energy

Red RGB Light (3.03X10-3 

W.m-2.sr-1),

Green RGB Light 

(0.106W.m-2.sr-1),

Blue RGB Light ( 4.1 W.m-2.

sr-1 ),

White RGB Light (4.7 

W.m-2.sr-1).

Irradiance source 

       25 RGB lights

Time Range 

       5~7 minutes on each area

27

28

 


background image

8.3 Label & Symbols

Model: 2 Face/ Face Evolution 

Electrical source:DC 3.7V 2200mAh

Heat In A Click LLC

1975 Tigertail Blvd,Dania,Florida,33004,United  States.

2Face/Face Evolution

        2Face

Face Evolution

Wellkang Ltd

Suite B, 29 Harley Street 

London, W1G 9QR, U.K.

SN : 1612300001-3000

The Maximum Output no-load Voltage: 30V

The emitted wavelength range:

Red Light(620-730 nm Wavelength),(3,03X10                 )

Green Light(525-550 nm Wavelength),(0,106               )

Blue Light(430-450 nm Wavelength),( 4,1               )

White Light(430-730 nm Wavelength),(4,7               )

LOT : 20161230

Risk Group:

Exempt Group classified by IEC/EN60601-2-57:2011,Medical 

electrical equipment-Part2-57:Particular requirements for the basic 

safety and essential performance of non-laser light source 

equipment intended for therapeutic,diagnostic,monitoring and 

cosmetic/aesthetic use

W.m .sr

W.m .sr

W.m .sr

W.m .sr

No.    Symbols 

   Description

Indicates the Authorized representative 

in the European Community.

Manufacturer

Protection against ingress of solids, it 

means the volume of the solids should 

less than 12mm. 

Protection against ingress of water, it 

means the device could protected 

against vertical falling water drop 15°.
“WEEE (Waste Electrical and Electronic 

Equipment)”. The waste products should 

be hand RGB legally.

CONSULT INSTRUCTIONS FOR USE.

Type BF Applied Part

Symbol for "SERIAL NUMBER". This 

symbol shall be accompanied by the 

manufacturer's serial number.
Batch code

9 Manufacturer Information

Company Name: Heat In A Click 

Address:1975 tigertail blvd Dania Florida 

33004 USA

Phone: 1(954)518-9777

Fax No.: 1(954)320-7984

Designed in USA

Copyright © 2016, 2 Face/Face Evolution

Utility and Design patents pending

2 Face / Face Evolution  ®

This product is brought to you by:

                            

Heat In A Click LLC

Address: 1975 tigertail blvd Dania Florida 33004 USA

                        Phone: 1(954)518-9777

                       Fax No.: 1(954)320-7984

                      E-mail: info@palmnrg.com

29

30

 


background image