PDF User Manual

  1. Home
  2. Manuals
  3. 247HelpAlert 247 ES-CAM4A Quick Start Manual

247HelpAlert 247 ES-CAM4A Quick Start Manual

Made by: 247HelpAlert
Type: Quick Start Guide
Category: Webcam
Pages: 13
Size: 0.67 MB

 

Download PDF User Manual


Related Product Video

 

Full Text Searchable PDF User Manual



background image

247-ES-CAM4A Quick Start Guide

24 7Alert

 


background image

247-ES-CAM4A Quick Start Guide

Warning

To prevent Fire or Shock Hazards, Do Not Expose This PRODUCT to Rain or Moisture.

Camera shall not be exposed to dripping or splashing and no object filled with liquids, 

such as vases, shall be placed on the apparatus.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

This symbol is intended to alert the user to the presence of uninsulated 

“dangerous voltage” within the product’s enclosure that may be of sufficient 

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the 

user to the presence of important operating and maintenance (servicing) 

instructions in the literature accompanying the product.

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER SERVICE-

ABLE PARTS INSIDE, REFER SERVICING TO

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

 


background image

247-ES-CAM4A Quick Start Guide

Regulatory Comission Notices for USA

This equipment has been tested and found to comply with the limits for a digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment 

generates, uses, and can radiate radio frequency energy and, if not installed and used 

in accordance with the instructions, may cause harmful interference to radio communi-

cations. However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications not expressly approved in this 

manual could void your authority to operate this equipment.

The shielded interface cable recommended in this manual must be used with this 

equipment in order to comply with the limits for a digital device pursuant to Subpart B 

of Part 15 of FCC Rules.

 


background image

To mount the 247 ES-CAM4A to the wall, 

place the camera in a position to ensure 

the most comprehensive view for video 

monitoring.

Unscrew the base of the camera and 

remove the plate. The dots on the base of 

the camera indicate the location of the 

expansion bolts. Insert the expansion bolts 

into the drilled holes.

Use a screwdriver to tighten or loosen the 

screws and secure the 247 ES-CAM4A and 

connect the device cables.

247-ES-CAM4A Quick Start Guide

 


background image

247-ES-CAM4A Quick Start Guide

To get started, download the iSecurity+ app 

from Apple’s App store or the Google Play 

Store on your smart phone or tablet.

1.  Download “iSecurity+” App 

2. Connect to power

Connect the ES-CAM4A to the AC power 

adapter, then plug your power cord into 

the electrical outlet.

 


background image

24 7Alert

3. WiFi Setup Mode

The Setup button will glow green on 

initial setup.

The “Wi-Fi Setup” LEDs in the front of the camera will flash green and 

orange alternatively and the ES-CAM4A will rotate when the camera is 

ready for setup. 

(This may take up to 2 minutes when the camera is first powered on.)

247-ES-CAM4A Quick Start Guide

 


background image

4.  Connect Your Smart Phone To ES-CAM4A

Go to your device’s settings ->

Under the Wi-Fi setting, connect to the ES-CAM4A XXXX (last 4 

digits of Cam ID) network.

247-ES-CAM4A Quick Start Guide

From your WiFi connection on your smart phone, click

to connect to your (ES-CAM4A XXX) Camera.  

 


background image

Once your device establishes connection to the ES-CAM4A, (usually 

takes around 30 seconds,) launch the iSecurity+ App. If you don’t 

see the pop up prompt, please close the app and re-launch it.

5.  Launch iSecurity+ App

iSecurity+ app will automatically detect your camera. 

When prompted, click ‘Yes’ to setup your camera.

247-ES-CAM4A Quick Start Guide

 


background image

Follow the instructions in the Camera 

SetupWizard to complete installation.

6.  Setup Wizard

You can use your iOS/ Android devices 

to access the camera anywhere in the 

world. Make sure your phone has 

access to the internet via 3G, 4G or 

Wi-Fi for internet connection.

Once you see the page below, the 

setup process has been completed. 

Setup Complete

247-ES-CAM4A Quick Start Guide

 


background image

Please enter your user name and password, created during 

the setup process to access your ES-CAM4A.

Camera 

Status

Configure

Camera

Recorded

Events

App

Settings

7. Using iSecurity+ Main Fatures Window

247-ES-CAM4A Quick Start Guide

 


background image

Swipe directional controls to change 

the camera Pan & Tilt view.

8.  Camera Tilt and Zoom Viewer Features

Video

Record

Snap

Picture

Speaker

On/Off

Mic

On/Off

(Hold down to speak)

247-ES-CAM4A Quick Start Guide

Zoom Function
Zooming In - Touch the screen with two fingers together 
and slide outward at an angle and the image will zoom in.

Zooming Out- Touch the screen with two fingers apart 
and slide inwards at an angle and it will zoom out.

 


background image

247-ES-CAM4A Quick Start Guide

LED Status Indicators 

During Wi-Fi Setup Mode

Flashing 

Green

 & 

Orange: 

Setup mode “ON”

Orange: 

Setup mode initializing

Light Off: Setup mode off

During Normal Operation

Green: 

Connected to iSecurity+ 

Orange:

 

Connected to local Network

Flashing Orange:

 

Not connected to any network

Setup button

Press and hold the button for 

seconds to reset the camera.

Press and hold the button for 

15

 seconds to factory reset the 

camera back to default setting. 

24 7Alert

Troubleshooting

 


background image

Safety Information

Do not point the camera directly at the sun, or else it will damage the image sensor.
Keep the camera away from heat to avoid electric shock.
Keep the camera away from rain and moisture.
Do not attempt to open, dismantle, repair, or service the camera. Doing so may cause electric shock 
and other hazards.
Any evidence of misuse, abuse, or tampering will void the Limited Warranty.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and 
operated withminimum distance of 20 cm between the radiator and your body. Use only the enclosed  
power adapter.

247-ES-CAM4A Quick Start Guide

Designed and Distributed by

247HelpAlert LLC

Irvine, California, USA

www.247HelpAlert.com